gametechmods

Robot Arena => Showcases => Stock Showcases => Topic started by: Scrap Daddy on March 09, 2008, 12:29:32 PM

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 09, 2008, 12:29:32 PM

Well I decided I would make a showcase here just for those that still come here. Ill post all the robots that I make here if I remember. 4 snowplows, 4 ramplates, 3 blacks, 8 razors.:-D My other Showcasehttp://robotarena.com/wizforum/forum_posts.asp?TID=6416&PN=1&TPN=47
(https://gametechmods.com/uploads/images/86568ingor.jpg)

Title: Scrap Daddy Design
Post by: Naryar on March 09, 2008, 12:35:27 PM

Waoh, violent.

I like the name. *evil grin*

I just wonder HOW you put these plows and ramplates like that?

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 09, 2008, 12:42:28 PM

Effe glich. Off the snapper its a 40 cm extender with a snowplow, then an angle connection thing, 80 cm enteder with snowplow on it, folowed by 2 t connecters with ramplates. Heres another bot I made recently.
(https://gametechmods.com/uploads/images/32747antimatter.jpg)

Title: Scrap Daddy Design
Post by: Naryar on March 09, 2008, 12:50:35 PM

Nice too. My favourite bot design :D. Ha, I just understand how you stacked the two Zteks on your weapon... yeah, that thing about spin motors being more powerful if you put them on a servo or burst.

You just put them on a Snapper II, right?

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 09, 2008, 12:59:42 PM

Yeah they're on a snapper II

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 12, 2008, 07:27:42 PM

Ive decided I would start working on a new team. I havent seen Bear claws get used since....well....BEAR. The names are not permanent.
(https://gametechmods.com/uploads/images/90781grizzly.jpg)
(https://gametechmods.com/uploads/images/86817littlebear.jpg)

Title: Scrap Daddy Design
Post by: Naryar on March 13, 2008, 09:47:15 AM

Looks wild. Nice bots, but with all these glitches used, he might be a little unstable? (or at least may lose some grip)

Hmm, I tried the servo-enhanced spin motors... waoh, it's insane. Some days ago I upgraded Tribute to Mayhem (stock) with Zteks put on servos, instead of sole Zteks.

Shameful... Could do three 1000-hits in one second and the record is nearby 8000 damage in one second (with an hybrid stock DSL, just replaced the Ztek by an Eteks and 1m disc). But the major problems is that the bot is more unstable and the spikes fly off really FAST.

Do you think a spin motor on a burst motor is more powerful than a spin motor on a servo? At least it's more practical because you can make the extender point the right way...

Title: Scrap Daddy Design
Post by: black panther on March 14, 2008, 02:01:55 PM

I Think a spin motor with a servo damages more wildly than with a burst.

In the long run, burst motors are a lot more effective because a spin motor with a servo slows down after 5-10 secs and has a great potential to cause Havok explosions.

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 15, 2008, 08:22:27 PM

Servos and snappers are equally good to stack with. Sometimes the snappers are easier to work with because you dont have to picture what your bot will look like before you build like you have to do with the servo. Snappers are less stable, IMO, and servos are more stable. Also the hw has perfect control. It works fien and never gets unstable unless its missing a lot of its claws.

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 22, 2008, 02:11:33 PM

2 new bots. The first ones a Sitn N' Spinner and the second ones a Borg Queen with irons.
(https://gametechmods.com/uploads/images/83905totalannihilation.jpg)
(https://gametechmods.com/uploads/images/94181Phoenix.jpg)

Title: Scrap Daddy Design
Post by: Naryar on March 22, 2008, 03:30:45 PM

OMFG! How the heck can you put a little less than 25 components on the same motor? Normally the game engines stop at 10 perhaps!

And you just stacked 5 black batts, right?

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 22, 2008, 03:40:59 PM

Nope it stops at 7. I didnt pass it either. Its servo-disc-ztek-tribar-ztek-tribar-iron. 7.

Im almost sure you cant stack 5 black batts in one place. Its only 3. It doesnt need to last much longer than 10 seconds. =P

Title: Scrap Daddy Design
Post by: RA2lover on March 22, 2008, 04:39:21 PM

how much batteries on the SitNSpinner?
the disk is just BEGGING to be hit by a hammer.
RAD drive on a HW is just plain immobile.

Title: Scrap Daddy Design
Post by: Naryar on March 22, 2008, 05:00:33 PM

RA2lover he put three black batts: that's just enough to power correctly the Zteks but not the 2 right angles.

Quote from: RA2lover;7017

the disk is just BEGGING to be hit by a hammer.

Yea. I was thinking this too. Especially as I have a anti-HS hammer specially designed for that :)

Nice stacking BTW. And for me, I spend minutes to find the right position to stack just TWO black batts ...

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 22, 2008, 05:21:10 PM

Hehe try an get that close to even use that hammer.
2 pinks on the SNS and I think RAD drive is fine in this case. It attacks from all angles and is fairly mobile.
Stacking black batts take about 10-30 seconds for me. I use the zoom glitch to zoom as far as I can in on the battery, and move it up and down until it stacks. 3 in one place takes me sometime 10 seconds some times maybe 5 minutes.

Heres my bot for Unkowns tournament. You might want to join it Naryar. It hasnt started yet.
(https://gametechmods.com/uploads/images/40679macer.jpg)

Title: Scrap Daddy Design
Post by: Naryar on March 22, 2008, 06:37:32 PM

Try what? You want to see what does it do when I use it properly?

(http://img213.imageshack.us/img213/5876/bqocc0.th.jpg) (http://img213.imageshack.us/my.php?image=bqocc0.jpg)

Thanks for inviting me to the tournament Scrap Daddy, but if it's MW ...count me out before I get mauled, i totally SUCK at building 'em and I fear I'll allways be. The previous I built can't even own Deadbeat properly...

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 22, 2008, 07:11:33 PM

Show in inside pic of it in your showcase. Im interested. =O

Title: Scrap Daddy Design
Post by: Naryar on March 22, 2008, 10:12:29 PM

Done. If you need more written explanations, just ask.

For unknown's tournament, kind of you to offer me the chance to participate, but I think I won't. My MWs suck, as said.

...But another thing will be the next stock HW tourny...

Title: Scrap Daddy Design
Post by: Scrap Daddy on March 23, 2008, 06:25:21 PM

Ok suit yourself. New robot. Good because it can get in before most spinners can get up to speed.

(https://gametechmods.com/uploads/images/40143infectiousdisease.jpg)

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 04, 2008, 09:42:53 PM

Okies 2 new robots. The first is a little lw hs and the second is an amazing unamed FlaIL Bot. I was at my friedns house who has RA2 and my favorite bot was a bot named Dizzy bee or something.....I tried to improve it.....

(https://gametechmods.com/uploads/images/29038tetanus.jpg)
(https://gametechmods.com/uploads/images/26904flailbot.jpg)

Title: Scrap Daddy Design
Post by: infiniteinertia on April 04, 2008, 10:37:27 PM

are those 3 razors each tip on shruti...?

Title: Scrap Daddy Design
Post by: sergeim on April 05, 2008, 02:03:29 AM

cool that must be fun

Title: Scrap Daddy Design
Post by: Naryar on April 05, 2008, 04:00:35 AM

Really nice and mean-looking flail bot. (even if it's a HS)

I think the name is Possessed Bee. Btw, Bee Keeper has also flailing weapons, I think (certainly the most annoying HS in Starcore 3)

And I don't get the point of having flailing weapons. It prevents the spinner getting blocked by the enemy (like in the case of a ram pinning a classical horizontal spinner), yeah, but doesn't this decreases damage?

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 05, 2008, 04:31:17 PM

Inf its only 2 razors each. If it was 3 it would be a freking amazing robot.

And Naryar the point of flails is that they kinda slap the ell out of the oponent. They dont stop like normal hs and continue to do damage. I think they are pretty awesomne weapons.

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 06, 2008, 03:00:39 PM

The final edition of DLJ that im going to send to Starcore with my team. This version has 10 wheel drive.
(https://gametechmods.com/uploads/images/8479DLJ.jpg)

Ingor II is here! Umm full impenetable front with 2 snowplows and a lot of casters. 8 razors 3 blacks, 4WD and 2 side snoplows. Inovative hammer setup that i have only seen on 1 other robot to reach over hs weapons and hit tribars/ motors.
(https://gametechmods.com/uploads/images/3536ingor2.jpg)

Title: Scrap Daddy Design
Post by: sergeim on April 06, 2008, 04:05:13 PM

nice job lookes good

Title: Scrap Daddy Design
Post by: Naryar on April 06, 2008, 05:04:39 PM

10WD??? You're more than insane!

Wait, that's impossible to stack FIVE batteries on one (to get full power you must have 5black batts, I'm sure you know this)! And if this is true, it means you have... hmm... 570 kg on drive only, if I count well...  

Ingor 2 is cool, very cool, (I just love hammers) good defense, but actually a good vertical spinner with enough weapons or a popup aiming well could defeat him quite easily. And you should make a U or V shaped front. It stops the spinner easily. And the angled hammer, although good, could have a better shape than that.

...But just wait. I'm absent for a week perhaps, and then i'll be back with a heck of a hammer (updating Grip of Violence, exactly)... And then...

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 06, 2008, 05:24:15 PM

Not really its just drive motors. 2 blacks would be plenty for that type of robot.

A vertical spinner might be able to kick its ass if it has good wedges because it will have to get under him. Same with pop-up. Oh and yeah it is a sorta v shape. You just cant see it that well with teh snowplows.

Title: Scrap Daddy Design
Post by: Naryar on April 06, 2008, 05:49:36 PM

WHAT? I saw at BeetleBros's website that you have to put one black batt for 2 HP Zteks to get full power !! Or this applies only to weapon motors ?

EDIT: "If you are only using spin motors, however (no burst motors), you can easily get by with output being only half of input." Oh, nevermind... but that's GREAT!

It isn't that only for the VS. A very offensive one (lots of weapons -drumlike-, or lots of weapon motors) may be able to rip off his hammers and then...

Title: Scrap Daddy Design
Post by: 70 CUDA on April 19, 2008, 06:34:16 PM

awsome bots man. i made a 10wd when i learned how to stack but i made it a SHW so i didnt post it. that and i had to aam some stuff to most people could stak but you guys would have known i didnt. that thing could 1 hit kill over half the starcore3 HWs

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 19, 2008, 06:41:59 PM

Nice Cuda.

Well I was going to wait for the forums to get back up to post this but apparently they arent going to be so......

(https://gametechmods.com/uploads/images/37104teamtimber.jpg)

(https://gametechmods.com/uploads/images/91602Teamtimbersinsides.jpg)

Oh and the second hw- CREDIT TO ROBOSHARK FOR THE DESIGN.

Title: Scrap Daddy Design
Post by: 70 CUDA on April 19, 2008, 06:54:00 PM

they look awsome were you gonna give them to starcore for ver4?

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 20, 2008, 02:36:03 PM

yeah.

Heres a Ripblade remake.
(https://gametechmods.com/uploads/images/42050ripblade.jpg)

Title: Scrap Daddy Design
Post by: Naryar on April 21, 2008, 04:53:50 AM

Not bad for ripblade; i'm thinking of making stock remixes too.

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 25, 2008, 10:09:27 PM

Okies Doomed Lumber Jack upgraded again. I went back down to 8 wheel drive that was I could get more axes in the front. Its wheels are now a lot closer to each other and the bot in general looks smaller.

(https://gametechmods.com/uploads/images/38049dlg.jpg)

I may work with the other bots again too. (Exept the Wood Chipper. Its as good as its going to get and I like how it preforms.)

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 28, 2008, 04:28:09 PM

With Venko pissing me off I made as good as a spinner as I could. Huge chassis I know. 2 blacks, dsa, 4 hp zteks with 3 irons on each end.

(https://gametechmods.com/uploads/images/97800stackedspinner.jpg)

Title: Scrap Daddy Design
Post by: Naryar on April 28, 2008, 04:48:38 PM

Owww I wouldn't like to be hit by that thing. I guess it does 1000-hits very easily, heh ?

Are you calling this a huge chassis? I'll put a LW here, or even a MW with some effort.

The only problem is - well, i dont think there is one... Only popups and hammers with twin ramplate plating could stand a chance against that thing. No, even popups  are disavantaged because the irons flush with the ground.

Eeeh, I really need a VERY good hammer to destroy him...

Title: Scrap Daddy Design
Post by: R0B0SH4RK on April 28, 2008, 08:21:41 PM

I have a popup that can beat that :3 Still a great bot though.
InfiniteInertia better make something pretty damn sweet soon; his 12 iron HS'ers are quickly becoming generic...
Uhh... make the chassis smaller and give it grannys to make it invertable...
It's better than mine >.<
Now make a version of ingor or something to beat it :P

...


This has been the most disjointed post i've ever posted...


BLAM it's over!

Title: Scrap Daddy Design
Post by: Naryar on April 29, 2008, 05:12:29 AM

Sounds great Roboshark. Have you got a picture of this popup ?

Title: Scrap Daddy Design
Post by: R0B0SH4RK on April 29, 2008, 05:48:44 PM

Why, yes I do

 http://www.robotarena.com/wizforum/forum_posts.asp?TID=6454&PN=1&TPN=18

20 razor tips can do wonders...

Just an aside, I'm not trying to take anything away from Scrap Daddy. That's a heckuva bot man.

Title: Scrap Daddy Design
Post by: Naryar on April 29, 2008, 06:24:01 PM

ZOMFG.

But the problem is: can he go under the HS? Because if he takes a hit...

Title: Scrap Daddy Design
Post by: Scrap Daddy on April 29, 2008, 10:04:54 PM

Nice pop-up RS, but that unprotected front could be destroyed pretty easily.

and yeah its invertable

Title: Scrap Daddy Design
Post by: Cooker on May 03, 2008, 04:03:13 AM

Sadly,the link does not work Roboshark.

Solid work Scrap Daddy. My favorite is Lumber Jack so far, but it can be, you are about to built my next favorite in this moment.:-D

Title: Scrap Daddy Design
Post by: Scrap Daddy on May 07, 2008, 04:40:25 PM

(https://gametechmods.com/uploads/images/4331soi.jpg)

Title: Scrap Daddy Design
Post by: Naryar on May 07, 2008, 05:10:21 PM

Nice one.

But dont like caster armor, its purely unfair.

Title: Scrap Daddy Design
Post by: R0B0SH4RK on May 07, 2008, 11:02:30 PM

Naryar, I disagree. Caster armour is the great equalizer against the hordes of HS's that drown our arenas today.

I like it. Now make a MW one :P

Title: Scrap Daddy Design
Post by: Madiaba on May 08, 2008, 12:09:23 AM

Agreed, Nice bot SD.  As long as you can keep facing your opponent.
I was thinking of making one like that for this present Tourney, except that the curve of the radius would go back toward/around the bot for a little more protection.
Nice job.  You can use the suggestion if you want to, NP, I can find something else.

Title: Scrap Daddy Design
Post by: Naryar on May 08, 2008, 06:47:26 AM

Well for a anti HS thing, a hybrid ram/hammer is THE solution. Or an armored popup.

Putting up a ramplate V at the front of your bot is best for me. Or a rack of irons. Besides, it's worth for a LW, because it takes time for a LW HS to destroy a ramplate, largely enough to pin it against a wall.

But I had to admit that this caster armor is much effective against HS. I've tried caster armor on a HW hammer, but that was difficult to put on and not really efficient because of crappy placing of the casters.

Title: Scrap Daddy Design
Post by: Cooker on May 08, 2008, 07:01:35 AM

I did never use the castors, but maybe I should give it a try.

Title: Scrap Daddy Design
Post by: Starcore on May 08, 2008, 12:49:27 PM

I am still fiddling with options for Bandersnatch and Jabberwock. Would you like to submit Ingor, Son of Ingor, and a MW version for consideration as the new Team Jabberwocky over the top hammer bots?

Starcore

Title: Scrap Daddy Design
Post by: Scrap Daddy on May 29, 2008, 04:32:10 PM

^ Yeah I'll try. They definatly can be made better than they are. I might try and work with them since I finished this beast.

(https://gametechmods.com/uploads/images/4243ironic.jpg)

Stats:
8hp ztek weapon motors
24 irons
2 hp ztek drive
2 blacks
dsa
invertable

:D

Title: Scrap Daddy Design
Post by: Sage on May 29, 2008, 04:47:26 PM

very nice. i bet thats does great against everything. looking at the chassis, i would presume you have 2 blue snappers on their sides with the black batt (is it 1 or 2?) in between. the snappers would face forward (the axle pointing forward) with 2 20cm extenders coming off it. the attachment points would be pointing forward, with all 4 HP Z-teks on them, and the drive motor on the end attachment. this would be the case for both snappers. the snappers are probably 2 notches raised.

it might be good to rotate half the motors upside-down, to protect against low chassis and weapons.

if thats only one black batt, do something about it.

Title: Scrap Daddy Design
Post by: Scrap Daddy on May 29, 2008, 04:50:33 PM

Wow you know my bot pretty good. :P

BTW I editied it and it does have 2 blacks.

Title: Scrap Daddy Design
Post by: Sage on May 29, 2008, 04:53:02 PM

:)   If someone builds an HS, i can usually tell what the setup is.

you could save some weight by shaving the top corners a little.

Title: Scrap Daddy Design
Post by: Naryar on May 29, 2008, 05:36:29 PM

All hail Sage!

Sage, you mean he attached them like in a hammer/spear config, that is 4 zteks in a direct line composed of 2 20cm extenders, in fact 2 lines, each attached to the rotating connection point of the snapper, and the drive to the servo-behaving connection point?

If i count well it makes 6 attachments for the farther iron spike to each snapper II...

damn, this is impressive effeing.

Title: Scrap Daddy Design
Post by: infiniteinertia on May 29, 2008, 07:30:27 PM

sage is only the HS heir.

Title: Scrap Daddy Design
Post by: Scrap Daddy on June 16, 2008, 09:51:53 PM

Ok, well I havent been in the mood to play RA2 much lately. I did upgrade(maybe) two of my old bots.

Heres The Chainsaw. Tell me what version you like better. The 2wd drive one with tons of weapons or the 4wd one with not so many weapons.
(https://gametechmods.com/uploads/images/76752newchainsaw.jpg)

And the Twig upgraded a bit. I changed how the drive was attached and got enough weight to put on irons.
(https://gametechmods.com/uploads/images/82744newtwig.jpg)

finally a weird glitch I might have discovered. While messing around with a Backyard Ripper upgrade I was able to do this. For about 20 seconds I was able to put anything in anything.
(https://gametechmods.com/uploads/images/83708stackings.jpg)

Title: Scrap Daddy Design
Post by: Sage on June 16, 2008, 10:23:24 PM

thats coool. how did it happen?

Title: Scrap Daddy Design
Post by: pyscolone on June 16, 2008, 10:53:19 PM

:O someone got the ZeroG glitch to work

Title: Scrap Daddy Design
Post by: Sage on June 16, 2008, 10:58:05 PM

Quote from: pyscolone;9638

:O someone got the ZeroG glitch to work

may i ask what that is? and how you know about it?

Title: Scrap Daddy Design
Post by: pyscolone on June 16, 2008, 11:05:01 PM

not really much to say until I find a surefire way for it to work 100% of the time.

Title: Scrap Daddy Design
Post by: R0B0SH4RK on June 17, 2008, 12:30:12 AM

ZeroG glitch? Sounds intriguing. Mabye Venko has somehow found out to use this glitch to make his uber-stacked bots.

Basically what it is though is a way to mount any component within any other component? And how much of the time can you get it to work?

Before you ask, venko, we believe this claim because it was done once, and verified by a veteran that it is indeed possible.

Title: Scrap Daddy Design
Post by: Naryar on June 17, 2008, 03:37:57 AM

IDK for The Chain Saw. It is perhaps better, seen that the wheels are less exposed. But the side irons are certainly better than axes.

...Glitches, glitches everywhere... guess i'm happy with eFFeing.

Title: Scrap Daddy Design
Post by: Venko on June 17, 2008, 03:40:40 AM

R0B0SH4RK or anybody... PM me and explain me this zerog glitch how its made cos maybe i use it in my bots without know its a zerog glitch...

Title: Scrap Daddy Design
Post by: Naryar on June 17, 2008, 03:53:47 AM

Obviously you should ask that to Pyscolone. Because he is the only one to know something about this.

Title: Scrap Daddy Design
Post by: Sage on June 17, 2008, 10:19:06 AM

pysc new about it a while ago, and has gotten it to work a couple times. but he didn't want it public cause he believed it would ruin the game. i mean, think about it. It's AAM in-game. stack whatever wherever whenever. who thinks thats fun after the first time? he got 10 hpz into a 2x2 square. so we should all just stop talking about it. its considered cheating, by me, pysc, and inf.

Title: Scrap Daddy Design
Post by: R0B0SH4RK on June 17, 2008, 01:55:42 PM

Sounds fair to consider it cheating. I mean, you could make a 4hpz 36 mace/spike HS (like Absolute Chaos) with HPZ drive, stacked batteries, DSA and probably caster armour on top of that all in a 2x2 square. How would anyone beat a bot like that? Beating Absolute Chaos, or sage's ultimatum is hard enough as it is. This ZeroG glitch probably would ruin the game if it were to become common knowledge. How would anything win other than by points?

Title: Scrap Daddy Design
Post by: pyscolone on June 17, 2008, 02:12:53 PM

Exact reason why it will never be released to public.

Title: Scrap Daddy Design
Post by: Venko on June 17, 2008, 02:23:23 PM

Im agree about this then... Dont show this bullsh** to anybody... It will ruin the game...

Title: Scrap Daddy Design
Post by: Scrap Daddy on June 17, 2008, 10:30:25 PM

So no saying anything about this "Zero glitch"?

I showed ACAMs this a while ago and he didnt say anything.

Title: Scrap Daddy Design
Post by: ACAMS on June 18, 2008, 12:17:33 AM

You did?
 
I don't remember.
 
Show me again.......I must have been intoxicated.

Title: Scrap Daddy Design
Post by: infiniteinertia on June 18, 2008, 09:41:48 AM

this is not how venko builds his bots. venko i know for a fact uses a cheating method by what i call "Semi AAM: .gmf Replacement" and ill show you guys why this is absolutely true.

Title: Scrap Daddy Design
Post by: Scrap Daddy on June 25, 2008, 11:38:05 PM

(https://gametechmods.com/uploads/images/37815inceinerator.jpg)

Title: Scrap Daddy Design
Post by: R0B0SH4RK on June 25, 2008, 11:56:54 PM

Nice drum. We don't see those very often.

Title: Scrap Daddy Design
Post by: Flying_Chao on June 26, 2008, 01:44:06 AM

The name is simply brilliant.

Title: Scrap Daddy Design
Post by: Naryar on June 26, 2008, 05:56:44 AM

Upgraded Tommy Gun... Really nice, but perhaps a little weak against HS... but that speed must help.

Title: Scrap Daddy Design
Post by: Madiaba on June 26, 2008, 08:54:54 AM

Looks nice, SD.  Can't wait to see it in a tourney.  
It may be on top of a HS before it can spin up...

Title: Scrap Daddy Design
Post by: Scrap Daddy on July 12, 2008, 02:34:57 PM

(https://gametechmods.com/uploads/images/61927merciless.jpg)

(https://gametechmods.com/uploads/images/20924newdlj.jpg)
DLJ looks nicer and has the wrong name in the picture.

Title: Scrap Daddy Design
Post by: infiniteinertia on July 12, 2008, 03:43:51 PM

was gonna say, isnt WormHole your massive A.C. enema?

Title: Scrap Daddy Design
Post by: R0B0SH4RK on July 12, 2008, 05:51:26 PM

Yeah... I fought Worm Hole, and it wasn't a rammer...

DLJ looks absolutely sweet though.

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 01, 2008, 12:49:59 PM

Mah BBEANS bot

(https://gametechmods.com/uploads/images/78335spaggheti.jpg)

Title: Scrap Daddy Design
Post by: Urjak on August 01, 2008, 01:38:05 PM

so you were the one with Iron spaghetti :P

Title: Scrap Daddy Design
Post by: R0B0SH4RK on August 01, 2008, 02:12:43 PM

Ima pwn yuz >:P

Title: Scrap Daddy Design
Post by: Clickbeetle on August 03, 2008, 07:59:25 PM

My only complaint about Iron Spaghetti is that it can't drive worth beans.  It just *barely* passes the controlled movement test.  Aside from that, it's a great bot.  Perhaps if the drive motors were placed further apart it could drive better...

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 13, 2008, 10:42:42 PM

Im having really bad builders block and cant think of anyway to upgrade the stock...Soooo
(https://gametechmods.com/uploads/images/1416caution.jpg)

Title: Scrap Daddy Design
Post by: Naryar on August 29, 2008, 12:43:06 PM

Nice. It looks you gave up the flipping part, making him a pure rammer...

...no?

Title: Scrap Daddy Design
Post by: DuckRA2 on August 29, 2008, 03:06:35 PM

looks better, wow you have gotten good, remember me? anyway nice work

Title: Scrap Daddy Design
Post by: Somebody on August 29, 2008, 03:26:30 PM

Duck, were you a big member on the old forums?

Title: Scrap Daddy Design
Post by: Flying_Chao on August 29, 2008, 03:28:34 PM

He made some interesting mods.

Title: Scrap Daddy Design
Post by: DuckRA2 on August 29, 2008, 03:34:13 PM

I was like a heavyweight i think

and i plan on making more mods

Title: Scrap Daddy Design
Post by: Somebody on August 29, 2008, 03:42:24 PM

cool, welcome back:-D:-D:-D

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 29, 2008, 03:50:20 PM

Wow two weeks and I finally get a post :P

Naryar, yeah...I turned it into full rammer. I ended up deleteing it by accident. I seem to be clicking delete instead of export lately..

and Duck, I remember you. You should finish your food pack. :]

Title: Scrap Daddy Design
Post by: DuckRA2 on August 29, 2008, 03:52:55 PM

yeah lol, i thought i may have given up on that, im not sure ohwell, back to topic

Title: Scrap Daddy Design
Post by: Scrap Daddy on October 12, 2008, 05:07:09 PM

(https://gametechmods.com/uploads/images/32176cocytus.jpg)

(https://gametechmods.com/uploads/images/63795tidalwave.jpg)

Title: Scrap Daddy Design
Post by: Somebody on October 12, 2008, 05:18:17 PM

An uber NWB and btw, isn't there a TidalWave on Team Atlantis in Starcore 3 that also has slow spinners?

Title: Scrap Daddy Design
Post by: Clickbeetle on October 12, 2008, 05:29:08 PM

If Cocytus has 4WD, then that's the scariest bot I've seen in a long time.  The only problem I see is that if those ram plates are gone, you're not getting any bots on top of the weapons.  It would turn into a pure HS, and a mediocre one at that.

I'm guessing Tidalwave has 8 tribars.  It might be worth your while to angle them down a bit, so they act as a wedge like on the Tidalwave in Starcore.  That Tidalwave is always a pain when it gets under you.

Title: Scrap Daddy Design
Post by: Sage on October 12, 2008, 05:52:44 PM

I helped improve cocytus! dont forget me!

Title: Scrap Daddy Design
Post by: infiniteinertia on October 12, 2008, 08:08:55 PM

DAMN YOU SCRAP DADDY. DAMN YOU

Title: Scrap Daddy Design
Post by: R0B0SH4RK on October 13, 2008, 03:23:30 PM

One day, NWB and RPB made love and had a baby. They named him Cocytus. He then ate both of his parents and anything around him.

The moral of this story is be afraid. Very, very afraid.

Title: Scrap Daddy Design
Post by: Naryar on October 13, 2008, 03:32:27 PM

Quote from: R0B0SH4RK;17206

One day, NWB and RPB made love and had a baby. They named him Cocytus. He then ate both of his parents and anything around him.

The moral of this story is be afraid. Very, very afraid.

Did you took that from the Infernal Contraption/Shebeast mating?

Anyways, if he has good wedges and 4WD... :gunz:

Title: Scrap Daddy Design
Post by: Somebody on October 13, 2008, 03:39:24 PM

What is RBP

Title: Scrap Daddy Design
Post by: Naryar on October 13, 2008, 03:41:35 PM

Quote from: Somebody;17211

What is RBP

You don't know the awesome Rabid Bit Pull?

Title: Scrap Daddy Design
Post by: infiniteinertia on October 13, 2008, 05:50:29 PM

RBP? Rabid Bit Pull? lmao.

Somebody, you are dyslexic of somesort.

Title: Scrap Daddy Design
Post by: Somebody on October 13, 2008, 06:12:40 PM

No, I am just bad with acronyms. Really bad with Acronyms.

Exampls: I had to look up what btw meant, and I still wonder what <3 means.

Title: Scrap Daddy Design
Post by: System32 on October 13, 2008, 06:21:48 PM

It's an emocon for a heart.

Title: Scrap Daddy Design
Post by: R0B0SH4RK on October 13, 2008, 11:27:12 PM

Emocon... hahahahaaaa

And I wrote RPB not RBP. Therefore, you could be lysdexic :P

Title: Scrap Daddy Design
Post by: Naryar on October 13, 2008, 11:35:16 PM

I found a nickname for RPB now thanks to this thread.

Title: Scrap Daddy Design
Post by: Somebody on October 14, 2008, 06:33:55 AM

It was just a typo.

Title: Scrap Daddy Design
Post by: Madiaba on October 14, 2008, 07:11:08 AM

Cocytus looks very effective, SD. Without seeing it in action, I can't think of any tweakings for improvement,... if there were any.
 

Quote from: R0B0SH4RK;17269

Emocon... hahahahaaaa
And I wrote RPB not RBP. Therefore, you could be lysdexic :P

Hehe. Nice diagnosis, RB.

Title: Scrap Daddy Design
Post by: Naryar on October 14, 2008, 07:36:18 AM

SB, you know that many leetspeek expressions came from typos?

SD does Cocytus has 4WD?

Title: Scrap Daddy Design
Post by: Scrap Daddy on November 05, 2008, 09:52:19 PM

NEW BOTS. Yeah, ive been fooling around with pistons lately and have like over 10 plus designs. These are the two i like the best.

(https://gametechmods.com/uploads/images/9346dualpistonpoker.jpg)
Not amazing but pretty good. Looks cool with slanted wheels too. 4 razors per piston, dsa, blah blah blah

(https://gametechmods.com/uploads/images/33976trinityhs.jpg)
This one I really like. Spin reeeealy fast and looks awesome with 3 wheels.

(https://gametechmods.com/uploads/images/67754trinity1hko.jpg)
Pretty good too.

Title: Scrap Daddy Design
Post by: Clickbeetle on November 05, 2008, 10:33:18 PM

Nice.  I'm guessing the first one is a LW and the second is a MW?

Bravo for being original with pistons, though that LW design has already been done -> https://gametechmods.com/uploads/images/22637lethin.jpg  (one of Firebeetle's old bots).

I haven't seen the 3-wheeled Trinity spinner before though.  Hey, Trinity is actually an appropriate name for that bot now.

Title: Scrap Daddy Design
Post by: Sage on November 05, 2008, 10:39:25 PM

wow. nice. you could lose some weight on the trinity one by using a sideways 20 cm on the baseplate anchor and a angler on the end that doesnt have the drive on it.

Title: Scrap Daddy Design
Post by: Naryar on November 06, 2008, 02:03:05 AM

Like them both, and a lot, excepted than the poker has low anti HS defense.

Title: Scrap Daddy Design
Post by: Scrap Daddy on November 17, 2008, 05:12:51 PM

Mega upgrade of my old drum.

(https://gametechmods.com/uploads/images/9448incinerator4.jpg)

Title: Scrap Daddy Design
Post by: Naryar on November 17, 2008, 05:20:09 PM

:O i have a drum with the same name. Incinerator.

Looks damn sweet. It looks to me it has 48 razors !

EDIT: Internals please?

Title: Scrap Daddy Design
Post by: System32 on November 17, 2008, 05:27:24 PM

How does it do against Tommy Gun, or Drumble bee?

Title: Scrap Daddy Design
Post by: R0B0SH4RK on November 17, 2008, 11:32:45 PM

:O

Nice.

Could you post a few more angles of it please?

Title: Scrap Daddy Design
Post by: Sage on November 18, 2008, 06:47:48 AM

extender protection from HS is needed. (If you are going to fight HS) Because this type of bot is useless without wedges.

Looks good otherwise though. Dunno if you need the rubbers, thought they do help with driving.

Title: Scrap Daddy Design
Post by: Clickbeetle on November 22, 2008, 11:32:52 PM

Making the drum cover the motors like a sleeve is an excellent idea.  I might just try making a new Drumblebee with that in mind.

You definitely need blades or spike strips or something shielding those extenders though, especially since the side plows are attached to the wedges.  You're just 100 HP away from some HS completely exposing your flank.

Title: Scrap Daddy Design
Post by: Sage on November 23, 2008, 08:43:49 AM

i actually used that idea with having the drum cover the motors somewhere in my showcase when i remade The Troll. this is much better though. that bot sucked. Hard.

Title: Scrap Daddy Design
Post by: TleeC11B on December 08, 2008, 07:24:07 PM

does this thing have 2 black bat?? or stacked??? either way its hilarious.. awesome bots BTW.

(https://gametechmods.com/uploads/images/8479DLJ.jpg)

Title: Scrap Daddy Design
Post by: TleeC11B on December 08, 2008, 07:29:38 PM

Quote from: System32;17253

It's an emocon for a heart.

emo-con... *scratches head*  Corrected...

Title: Scrap Daddy Design
Post by: Scrap Daddy on May 07, 2009, 07:22:40 PM

Its been 6 months since I posted a bot? Wow. Heres my bot for Inf's tourny.

(https://gametechmods.com/uploads/images/70218ID.jpg)

I might start posting more bots because baseball is almost over again.

Title: Scrap Daddy Design
Post by: Sage on May 07, 2009, 08:21:46 PM

love it, but whats the drive? DSA? Nifty or Black? Whats the wedge attached to?

Title: Scrap Daddy Design
Post by: Scrap Daddy on May 07, 2009, 08:27:25 PM

HP Z-teks. I'm not sure. I built quite a few diff version of it with plastic and DSA. Black. Green snapper.

Title: Scrap Daddy Design
Post by: Jack Daniels on May 07, 2009, 08:32:41 PM

Wow, that looks awesome. So that is what you meant by "people think they need high spinning weapons on a FS".  I never tried a design like that... so I trust since you built it and submitted it, the bot must be pretty decent.  I'm surprised you didn't go for the finishing touch and protect the extender with a blade somehow. :P

Title: Scrap Daddy Design
Post by: infiniteinertia on May 07, 2009, 08:35:03 PM

Scrap, where may I contact you so I can get you to post bots more often?

Title: Scrap Daddy Design
Post by: kill343gs on May 07, 2009, 09:53:01 PM

Inf's good at that, trust me. I of all people would know.

Title: Scrap Daddy Design
Post by: pyscolone on May 07, 2009, 09:57:17 PM

I was just designing a FS that looked quite similiar but with some big differences.

Title: Scrap Daddy Design
Post by: Somebody on May 08, 2009, 05:59:09 AM

Then it wouldn't be very similar now would it? hmmm???

Nice bot SD

Title: Scrap Daddy Design
Post by: Scrap Daddy on May 21, 2009, 08:11:27 PM

I decided I would do some building tonight seeing as I didn't have baseball today. I tried to build some VS for infs tourny and 2 out 3 were failures. I'll post the failures now because I might use the other one.
Heres some crappy VS. Sucks because its weapon motors fall off constanly, wedges suck, and can juggle anything without falling over:
(https://gametechmods.com/uploads/images/81235VSfailure.jpg)

Heres the second:
(https://gametechmods.com/uploads/images/83025FAIL.jpg)
I tried to do something like one of Pys' VS and it didn't turn out too well. I ran out of weight so I couldn't even put castors on. Oh well.

Title: Scrap Daddy Design
Post by: infiniteinertia on May 21, 2009, 08:29:27 PM

Middleweight VS Fail! Epitome of my bot building...

Glad you're suffering :]

Title: Scrap Daddy Design
Post by: DuckRA2 on May 22, 2009, 05:04:35 PM

spam?:ban_smily:

Title: Scrap Daddy Design
Post by: man manu on May 23, 2009, 06:54:02 AM

What?

Title: Scrap Daddy Design
Post by: Flying_Chao on May 23, 2009, 07:13:31 AM

A spambot was here.

Title: Scrap Daddy Design
Post by: Scrap Daddy on May 26, 2009, 06:54:57 PM

(https://gametechmods.com/uploads/images/66997CarnifeX.jpg)
rawr

Title: Scrap Daddy Design
Post by: infiniteinertia on May 26, 2009, 06:57:48 PM

you better sendz.

Title: Scrap Daddy Design
Post by: Scrap Daddy on July 17, 2009, 02:07:13 PM

DAMNIT
(https://gametechmods.com/uploads/images/79071Tormentor.jpg)
I'm hoping im wide enough to break those snowplows.

Title: Scrap Daddy Design
Post by: Reier on July 17, 2009, 02:08:39 PM

Wow, nice LW dual FS. Don't see those too often.

Title: Scrap Daddy Design
Post by: Naryar on July 17, 2009, 02:56:02 PM

Whoa, nice bot.

Plastic ?

Title: Scrap Daddy Design
Post by: DuckRA2 on July 17, 2009, 03:59:34 PM

Quote from: Scrap Daddy;52294

DAMNIT
(https://gametechmods.com/uploads/images/79071Tormentor.jpg)
I'm hoping im wide enough to break those snowplows.

looks a little like mine, probably better
 (https://gametechmods.com/uploads/images/37463Splashss%20copy.png)

Title: Scrap Daddy Design
Post by: Sage on July 17, 2009, 04:06:52 PM

yep but his is LW.

Title: Scrap Daddy Design
Post by: DuckRA2 on July 17, 2009, 04:08:59 PM

yes I ment it does better against its lightweights then mine against middleweights, I wasn't precisly sure how to write it

Title: Scrap Daddy Design
Post by: pyscolone on July 17, 2009, 04:30:40 PM

Just a heads up, but the RADs aren't even.

Title: Scrap Daddy Design
Post by: kill343gs on July 17, 2009, 04:38:43 PM

Actually the whole 2 sides are uneven if you look at it.

Title: Scrap Daddy Design
Post by: R0B0SH4RK on July 17, 2009, 04:39:14 PM

^ I think that's just the angle of the picure.
EDIT: It's not. They actually are un-even :O

Any particular reason the drive is at an angle like that? Or could you just not fit it straight?

Title: Scrap Daddy Design
Post by: System32 on July 17, 2009, 04:47:30 PM

I did this with my TS Revolver...

You messed up the extender work.

Title: Scrap Daddy Design
Post by: Scrap Daddy on July 17, 2009, 05:18:26 PM

Hehe yeah I noticed that after I posted it and hoped no one would notice. :P

BTW Pyc, it isnt the RADS that werent even, the redbird on the right was angled too much and it just makes everything else look uneven.

r0b0, I can't fit the drive on straight. It doesn't affect it all and makes it look bad ass. >:D

Title: Scrap Daddy Design
Post by: Scrap Daddy on July 17, 2009, 05:50:34 PM

Hehe yeah I noticed that after I posted it and hoped no one would notice. :P

BTW Pyc, it isnt the RADS that werent even, the redbird on the right was angled too much and it just makes everything else look uneven.

r0b0, I can't fit the drive on straight. It doesn't affect it all and makes it look bad ass. >:D

Title: Scrap Daddy Design
Post by: infiniteinertia on July 17, 2009, 07:28:01 PM

It would be good. But that nifty drains fast, i would know.

On my second team I have a dual LW FS (Wavelength) with RAD drive and 8 razors. The nifty is alf one 40 seconds into the match, about.

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 06, 2009, 10:18:33 PM

Time for a HS killing HS(sorta, it's kinda angled i guess)!

(https://gametechmods.com/uploads/images/43817Leech.JPG)

I originally had irons without a wedge because it was meant to fight HS and most HS don't have wedges but i decided I would make it at least decent against wedges. No SCv4 HS can beat it. Leprosy is easy pickens and Maelstrom puts up a good fight because of the casters. I'm pretty sure it could beat a 36hs but i haven't tried yet.

It works somewhat like a juggler with the bots ontop of the tribars chewing extenders and the chassis.

Ps: You might see a MW version in some tourny :O but you might not ;)

Title: Scrap Daddy Design
Post by: infiniteinertia on August 06, 2009, 11:05:14 PM

:D reminds me of one of TWX's bots

Title: Scrap Daddy Design
Post by: R0B0SH4RK on August 07, 2009, 02:22:29 AM

(https://gametechmods.com/uploads/images/47381smalluberhappy.PNG)

It looks sweet.

How does it do against non-HS's?

Title: Scrap Daddy Design
Post by: Kristjanq on August 08, 2009, 08:21:54 AM

Scrap Daddy , wat the motor on the second picture ,that gray motor, rly need that.

Title: Scrap Daddy Design
Post by: JoeBlo on August 08, 2009, 08:49:29 AM

the blue thing on the end of the robot ? thats a snapper II and can be found in the download section of this site under AI parts

back onto the bot and <3 is all I can say.. its like looking at a piece of artwork

Title: Scrap Daddy Design
Post by: Kristjanq on August 08, 2009, 12:41:48 PM

thanks for the help

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 08, 2009, 06:36:49 PM

Quote

How does it do against non-HS's?

I was actually suprised it beats other stuff. It works sorta like Sage's Vise with the long wedge.
Battleshots:
(https://gametechmods.com/uploads/images/78805LeechVsRPB.JPG)
(https://gametechmods.com/uploads/images/26771LeechTakesOutMaelstrom.JPG)
(https://gametechmods.com/uploads/images/64239LeechVsLeprosy.JPG)
I like fighting with it so much because it's funny how it pretty much rips off every coponent before destroying the other bot.
Also here's the bot im probably going to enter into that tourny. This doesn't have a wedge so im hoping to draw a few HS.
(https://gametechmods.com/uploads/images/10199leprosybeatbyMW.JPG)

Title: Scrap Daddy Design
Post by: Natef on August 08, 2009, 09:54:56 PM

Wow. Cool.

Title: Scrap Daddy Design
Post by: infiniteinertia on August 09, 2009, 12:01:41 AM

Eat YO Face DISEASE.

TWX's bot, it is in his Youtube vid.

But Leech is sick. Easily considered as one of the Top 5 bots showcased on the Stock Thread this year.

Title: Scrap Daddy Design
Post by: pyscolone on August 09, 2009, 12:09:48 AM

How many blacks in the HW? Also is it possible you can raise the drive and put Slims on it? Just an idea nothing too serious.

Title: Scrap Daddy Design
Post by: R0B0SH4RK on August 09, 2009, 12:48:02 AM

Is Leech 6WD?

Title: Scrap Daddy Design
Post by: Pwnator on August 09, 2009, 03:48:10 AM

6WD HS? o_O

I don't think so. My estimated allow it to have 4WD and 3 blacks only. And is EFYD 2WD 24-iron? I couldn't see well. And it's kinda creepy seeing a 24-razor pwn a 24-iron. :O

Can't wait to see the MW. :D

Title: Scrap Daddy Design
Post by: System32 on August 09, 2009, 06:46:48 AM

Pwn: Pic at the bottom.

Does Leprosy have a battle axe? O.o

Title: Scrap Daddy Design
Post by: H@zm47 on August 09, 2009, 07:00:44 AM

Quote from: System32;58603

Does Leprosy have a battle axe? O.o

It has two. They serve as wheel guards I believe.

Title: Scrap Daddy Design
Post by: System32 on August 09, 2009, 07:15:21 AM

BLASPHEMY!

Title: Scrap Daddy Design
Post by: H@zm47 on August 09, 2009, 07:30:38 AM

How did you not know that? What version of Starcore are you using?

Title: Scrap Daddy Design
Post by: Pwnator on August 09, 2009, 07:52:40 AM

@ S32 - Thanks.

And yep. SCv4 Leprosy has 2 battle axes as wheel guards.

If my juggler can beat Extreamliner, then it could still stand a chance against SD's. XD

Can the MW still go under bots Tidal Wave-style? :D

Title: Scrap Daddy Design
Post by: Jonzu95 on August 09, 2009, 08:36:57 AM

Leech is deadly... O_O

Title: Scrap Daddy Design
Post by: Reier on August 09, 2009, 09:13:54 AM

Heyyyy...I did a 6wd HS a while back as a BOTM entry, but it was more of a joke bot.

Title: Scrap Daddy Design
Post by: System32 on August 09, 2009, 09:30:00 AM

Quote from: H@zm47;58607

How did you not know that? What version of Starcore are you using?

I don't really bother with Starcore anymore.

I just AI my own stuff nowadays.

Title: Scrap Daddy Design
Post by: infiniteinertia on August 09, 2009, 12:09:28 PM

And Leech is 4wd.

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 09, 2009, 12:25:58 PM

Yeah Leech is 4wd and idk if ive ever seen the youtube vid because i haven't had youtube working for over a year.

Im pissed because I sent the mw one to DK that has a nifty and a wedge and is so much worse but fights better against pop-ups. :0

Title: Scrap Daddy Design
Post by: Clickbeetle on August 09, 2009, 08:27:37 PM

Quote from: Scrap Daddy;58178

*freakishly awesome and scary bot*

NOOOOOOO.... I remember Tidal Wave was easily one of the toughest bots in Starcore 2, and definitely the most annoying, and it can still be annoying on occasion when it rips off your wedge and/or gets under you.  The undercutting anglemotor spinner design is very underestimated, methinks.

And now you've gone and given it a wedge and 4WD.  I can imagine how annoying Leech must be to fight.  Very appropriate name choice.

Possible replacement for Tidal Wave in Starcore 4?  I'd vote for it.

Title: Scrap Daddy Design
Post by: Reier on August 09, 2009, 08:30:16 PM

Pwnator built a LW Juggler caller Leech also...
I like both.

Title: Scrap Daddy Design
Post by: infiniteinertia on August 09, 2009, 10:29:01 PM

Dont use it for Starcore, use it for IIAI:]

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 28, 2009, 08:39:11 PM

I needed to build something in stock after Reier soiled me with DSL so I built this.

(https://gametechmods.com/uploads/images/33098MouthofGreed.PNG)

Nothing that cool. Saw a weapon like this on one of FB's bots and wanted to give it a try. DDT wedges for coolness and can self right most of the time.

and then there's this...

(https://gametechmods.com/uploads/images/45661SNS.JPG)

Beats everything exept HS.

Title: Scrap Daddy Design
Post by: Sage on August 28, 2009, 08:50:50 PM

Quote from: Scrap Daddy;62374

I needed to build something in stock after Reier soiled me with DSL so I built this.


(https://gametechmods.com/uploads/images/45661SNS.JPG)

Beats everything exept HS.

OMG YOU STOLE MY IDEA! I TOTALLY told Inf I was gonna buid a HW flail SnS online. You were there I think. DAMn

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 28, 2009, 08:54:04 PM

Nah ive had a 5wd one for a while and it was awful. I decided to make it 6wd and im pretty sure I wasn't there because I don't remember.

Title: Scrap Daddy Design
Post by: Sage on August 28, 2009, 09:20:44 PM

Quote from: Scrap Daddy;62378

Nah ive had a 5wd one for a while and it was awful. I decided to make it 6wd and im pretty sure I wasn't there because I don't remember.

Oh ok. good bot then.

Title: Scrap Daddy Design
Post by: R0B0SH4RK on August 28, 2009, 10:58:08 PM

Yaaaaaay. More bots that I can beat online xD

Title: Scrap Daddy Design
Post by: infiniteinertia on August 28, 2009, 11:28:57 PM

effin FINALLLY.

Love the FS!

and the SNS...just way till you see mine (=....its 60-80% done

Title: Scrap Daddy Design
Post by: Pwnator on August 29, 2009, 04:53:44 AM

I <3 <3 <3 <3 <3 the SnS (and the FS too ofc). :D

Possible Jupiter replacement? :D

[Edit] Speaking of which, I gotta update my Jupiter remake. I already got tons of ideas to implement on it. XD

Title: Scrap Daddy Design
Post by: JoeBlo on August 29, 2009, 05:02:29 AM

The SnS looks really good Scrap

Title: Scrap Daddy Design
Post by: Scrap Daddy on August 29, 2009, 08:04:34 PM

:OOOOOO

(https://gametechmods.com/uploads/images/68639no!!.JPG)

If it had maces it would be a total different story but still.

Title: Scrap Daddy Design
Post by: Naryar on August 29, 2009, 08:18:14 PM

AH AH i have something like this but 4WD.

Title: Scrap Daddy Design
Post by: R0B0SH4RK on August 29, 2009, 09:58:44 PM

I reeeeeeeeeeeeeeallly <3 that bot SD. Great for online too.

Jeez, I got so many ideas now, I can't wait to get back home and do some RA2 :)

Title: Scrap Daddy Design
Post by: Scrap Daddy on September 10, 2009, 08:24:53 PM

randooooom lightweight.

(https://gametechmods.com/uploads/images/26805bleh.PNG)

DSA and black.

and a time where i felt like Venko. theres pretty much no useful reason for stacking this unless for a lw side hammer.
(https://gametechmods.com/uploads/images/40119screenshot_1.JPG)

Title: Scrap Daddy Design
Post by: infiniteinertia on September 10, 2009, 08:52:00 PM

*erased by ii for regrettable douchincess*

Title: Scrap Daddy Design
Post by: The Ounce on September 10, 2009, 09:00:35 PM

SD's is better :P

Title: Scrap Daddy Design
Post by: pyscolone on September 10, 2009, 09:38:32 PM

How could you fit a black in that SD.

Title: Scrap Daddy Design
Post by: infiniteinertia on September 11, 2009, 05:28:15 AM

Quote from: The Ounce;65305

SD's is better :P

Mine has a black and rapes n000bz

SD's does neither :P

Title: Scrap Daddy Design
Post by: Scrap Daddy on September 11, 2009, 04:58:22 PM

Quote from: Scrap Daddy;65302

DSA and black.

AHEM.

I'll see you online inf... >:]

Title: Scrap Daddy Design
Post by: roboman2444 on September 11, 2009, 05:00:37 PM

lol

Title: Scrap Daddy Design
Post by: infiniteinertia on September 11, 2009, 09:53:53 PM

there is NO way you have a black in there, look at my chassis compared to yours

Title: Scrap Daddy Design
Post by: Scrap Daddy on September 11, 2009, 10:25:17 PM

(https://gametechmods.com/uploads/images/51896ha.JPG)

Title: Scrap Daddy Design
Post by: infiniteinertia on September 11, 2009, 11:08:06 PM

still gay!

Title: Scrap Daddy Design
Post by: Clickbeetle on September 11, 2009, 11:29:39 PM

Quote from: Scrap Daddy;65302

and a time where i felt like Venko. theres pretty much no useful reason for stacking this unless for a lw side hammer.
(https://gametechmods.com/uploads/images/40119screenshot_1.JPG)

What a coincidence.  I had to stack Snappers like that to make Frag Beetle Larva (a MW side hammer).

The LW looks good.  I wonder whose chassis is lighter, yours or inf's?  The tall one or the long one?

Title: Scrap Daddy Design
Post by: Naryar on September 12, 2009, 04:36:01 AM

Scrap VS Inf?

*fetches popcorn*

Title: Scrap Daddy Design
Post by: Reier on September 14, 2009, 05:39:59 PM

Maybe angle the weapon RAD so it's level with the ground to make it invertible? IDK.

Title: Scrap Daddy Design
Post by: Pwnator on September 15, 2009, 04:08:18 AM

He probably wanted to make a LW version of Leech (his HS, not my juggler). XD

Fight it online vs Inf! *steals popcorn*

Title: Scrap Daddy Design
Post by: Scrap Daddy on October 04, 2009, 06:35:12 PM

(https://gametechmods.com/uploads/images/9082Krypticupclose.PNG)

(https://gametechmods.com/uploads/images/497KrypTic.PNG)

Title: Scrap Daddy Design
Post by: Sage on October 04, 2009, 06:49:06 PM

Took Mincemeat and made it (at least look) better. Nice job.

Title: Scrap Daddy Design
Post by: Clickbeetle on October 04, 2009, 08:35:20 PM

Like a combination wammer/juggler.  Neat idea.  That would let the bot still do damage when the opponent is on its wedge.

Title: Scrap Daddy Design
Post by: Jack Daniels on October 04, 2009, 08:55:45 PM

Hmmm... no weight?

Would it be possible to ditch the top row of axes and replace them (somehow) with vertical samurai swords?  Kinda like Robo's R4 setup? That way bots are less likely to go up and over this design. It might keep them in front of the mass of pointy things.

Title: Scrap Daddy Design
Post by: Scrap Daddy on November 05, 2009, 01:08:34 PM

(https://gametechmods.com/uploads/images/44538SadisticEmbrace.PNG)

Title: Scrap Daddy Design
Post by: Virus Bomb on November 05, 2009, 01:12:52 PM

Looks very dangerous.

Title: Scrap Daddy Design
Post by: Reier on November 05, 2009, 01:14:24 PM

^^What he said.

Title: Scrap Daddy Design
Post by: Resetti's Replicas on November 05, 2009, 02:08:36 PM

Can we see a shot of the insides?

Title: Scrap Daddy Design
Post by: ashman12 on November 05, 2009, 02:33:39 PM

awesome paintjob on sadistic embrace.

Title: Scrap Daddy Design
Post by: Sage on November 05, 2009, 04:19:10 PM

Hm. It looks effective, but i think it's too skinny.

Title: Scrap Daddy Design
Post by: Clickbeetle on November 06, 2009, 11:03:39 PM

Also there's no way to hit bots that are on top of you, which is a very real possibility with no stoppers at the top of the wedge.  Of course, adding stoppers would kill your invertibility.  So really nothing you can do about that.

Cool twist on the design; I thought it was another generic caster popup when I first saw it, but then I was like, "WHOA, it's a poker!"

Title: Scrap Daddy Design
Post by: Naryar on November 07, 2009, 05:04:58 AM

Quote from: Clickbeetle;77545

I thought it was another generic caster popup when I first saw it, but then I was like, "WHOA, it's a poker!"

Lol exactly the same for me.

It looks pretty good. And IMO it's better to be invertible than to have top stoppers (Hazcon was lucky :P)

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on January 23, 2010, 08:56:03 PM

Why have all the castor flippy bots have been pop-ups? Lets change that. :P

(https://gametechmods.com/uploads/images/48609CastorVSflippy.PNG)

Not too great tbh. Trades what a good VS needs, speed for gobs upon gobs of armor but great wedges!

A bit too sloppy i'll admit but I just needed to build something after another DSL escapade. I will rebuild it eventually with hopes of 4wd.

Title: Re: Scrap Daddy Design
Post by: Pwnator on January 23, 2010, 09:29:22 PM

<3 <3 <3

You could probably remove the 2 topmost casters and find some more weight to give it rubbers.

Title: Re: Scrap Daddy Design
Post by: R0B0SH4RK on January 24, 2010, 12:38:12 AM

Kick-ass bot is kick-ass.

Title: Re: Scrap Daddy Design
Post by: Jack Daniels on January 24, 2010, 11:04:33 AM

Looks like bubble wrap... you should name it bubble wrap.  :gawe:

In all seriousness though, that design scares the heck out of me.  If you design it to have a great wedge, it looks like it would be un-killable.  However, because it would need a few seconds to properly flip itself over when the match starts, a 6wd rammer could possibly get there soon enough to surprise it.  A match between this and Stratocaster would be fun to watch.

Very innovative!

Title: Re: Scrap Daddy Design
Post by: Reier on January 24, 2010, 01:05:26 PM

Redlining on the awesome scale SD.

Title: Re: Scrap Daddy Design
Post by: kill343gs on January 24, 2010, 04:40:09 PM

Let me fix Strat's weapon rack and then we could talk JD...

Title: Re: Scrap Daddy Design
Post by: Clickbeetle on January 27, 2010, 11:53:28 PM

Quote from: Scrap Daddy on January 23, 2010, 08:56:03 PM

Why have all the castor flippy bots have been pop-ups?

Because on a popup, there is absolutely nothing to hit while the razors are retracted.  On a VS, bots can still hit your weapon and cripple you; the casters only protect the chassis.  Upside-down popups have the advantage of being able to survive unscathed nearly indefinitely against HS's.


But it's still an awesome bot.  The upside-down caster design is sorely underutilized; I think everyone is afraid of copying my Sacrifice bots.  I would recommend putting the weapons further back, perhaps embedded in the casters more, so they just barely poke out, more like a juggler or a Dark Pounder-style VS.

Title: A
Post by: Naryar on January 28, 2010, 03:43:40 AM

Quote from: Clickbeetle on January 27, 2010, 11:53:28 PM

Because on a popup, there is absolutely nothing to hit while the razors are retracted.  On a VS, bots can still hit your weapon and cripple you; the casters only protect the chassis.  Upside-down popups have the advantage of being able to survive unscathed nearly indefinitely against HS's.

Agreed. That's why i think it's the design is not that worthy on a VS.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on February 06, 2010, 05:50:48 PM

I thought I would be damn close to cloning RPB buuuut...
(https://gametechmods.com/uploads/images/52527CoalMiner.PNG)
Nope. Huge chassis took up moar weight than I thought it would and the bot itself fails :P

On a brighter note I have The Boxer almost done.

Title: Re: Scrap Daddy Design
Post by: Jack Daniels on February 06, 2010, 06:03:21 PM

Haha. I was working on a Coal Miner redo today as well.  The fat chassis is a bit of a killer though.  Last week I remade Boxer, but it failed so bad I cried in the corner for hours like a little girl lost in the night.  :P   (because it looked so damn cool when I was finished... but was horrible doing damage)

Is your boxer remake decent in combat?

Title: Re: Scrap Daddy Design
Post by: Clickbeetle on February 13, 2010, 12:58:22 AM

Ooh!  On the Coal Miner rebuild, get rid of the two edge spinners and put a single spinner high up in the middle, pointing down, like on Industrial Coal Miner in DSL.  I always liked the tri-face spinner setup on that bot (which is based off a real life mining drill design).


Can't promise it will be effective, but you'll get weight, and it will look cool.

Title: Re: Scrap Daddy Design
Post by: System32 on July 11, 2010, 07:03:27 PM

Quote from: Scrap Daddy on July 11, 2010, 06:54:25 PM

meh

Meh.

Title: Re: Scrap Daddy Design
Post by: Sage on July 11, 2010, 07:10:18 PM

Yea, just looks a little messy. Still cool though.

Title: Re: Scrap Daddy Design
Post by: Pwnator on July 11, 2010, 09:12:36 PM

For some reason it just looks a little bland. But still <3

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 25, 2010, 10:04:08 PM

LOOK SOMETHING GOOD.
(https://gametechmods.com/uploads/images/30679VSmacess.PNG)
4wd, selfrights nicely, AWESOME wedges.

Title: Re: Scrap Daddy Design
Post by: Pwnator on July 25, 2010, 10:07:19 PM

GRAAH I WAS ABOUT TO BUILD SOMETHING LIKE THAT (but with birds)

Is it powerful? 40kg seems like too much for a RAD to handle.

Title: Re: Scrap Daddy Design
Post by: Sage on July 25, 2010, 10:25:13 PM

40 + 15 = 55 kg :)

Schweet bot. Can't see it beating many HS tho.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 25, 2010, 11:23:48 PM

(https://gametechmods.com/uploads/images/53674BS.PNG)
It doesn't do as bad against HS as you might think but castor bottom HS eat it alive. I mean leprosy isn't a 36hs but its still good.

I plan to switch to razors and give it some snowplows so it fights hs better. Plus the spinners will spin faster.

Title: Re: Scrap Daddy Design
Post by: 40757 on July 25, 2010, 11:36:39 PM

Doesn't it bounce?

Title: Re: Scrap Daddy Design
Post by: Pwnator on July 25, 2010, 11:43:04 PM

With RADs, I don't think so. I don't think they bounce in birds as well.

Title: Re: Scrap Daddy Design
Post by: Sage on July 26, 2010, 12:21:23 AM

Razors, plows, and a better paintjob ;)

Title: Re: Scrap Daddy Design
Post by: G.K. on July 26, 2010, 01:29:03 AM

Quote from: Sage on July 25, 2010, 10:25:13 PM

40 + 15 = 65 kg

40 + 15 = 55

Title: Re: Scrap Daddy Design
Post by: Pwnator on July 26, 2010, 01:29:43 AM

SCHOOLED.

Title: Re: Scrap Daddy Design
Post by: Gazea2 on July 26, 2010, 01:40:53 AM

LOL at Pwn. :P

I would follow Sage's advice and add a plow and maybe change to razors.

Title: Re: Scrap Daddy Design
Post by: Sage on July 26, 2010, 11:08:22 AM

(http://images.encyclopediadramatica.com/images/c/c4/Fffuuu.gif)

Title: Re: Scrap Daddy Design
Post by: G.K. on July 26, 2010, 04:10:41 PM

So Sage can't drive or add up? :P

Title: Re: Scrap Daddy Design
Post by: infiniteinertia on July 27, 2010, 04:56:37 PM

I miss you SD, we need to catch up.

Title: Re: Scrap Daddy Design
Post by: Naryar on July 29, 2010, 11:40:08 AM

Kewl. But yeah, 55kg is too much for a rad i think.

Title: Re: Scrap Daddy Design
Post by: TorrFac on July 29, 2010, 04:11:55 PM

look's really impressive and powerfull even when u know that's working! good job

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 30, 2010, 01:26:54 AM

Did pwn build a hw Flying Guillotine? Well I did and lol'd the first time I saw it finished.
(https://gametechmods.com/uploads/images/59841Flyin.PNG)
Obviously these Battle axes are doing nothing but I was too tired after alligning the razors to add more. I will add the razors in the morning along with posting some battleshots because its even funnier when it fights :P
 
Also i have no idea why the quality is so bad.

Title: Re: Scrap Daddy Design
Post by: JoeBlo on July 30, 2010, 01:35:32 AM

sorry 123 but Scrap just made a cooler looking one  :gawe:

Title: Re: Scrap Daddy Design
Post by: ianh05 on July 30, 2010, 01:40:28 AM

maybe put those axes somewhere to cover those exposed extenders on the side because hammers could still eat it up.

Title: Re: Scrap Daddy Design
Post by: Pwnator on July 30, 2010, 03:21:13 AM

Too lazy to build a HW version.

And since you have the weight now, you could try a srimech. :D

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on November 13, 2010, 03:33:24 PM

Ohhhhhh stock
(https://gametechmods.com/uploads/images/57457Icepickrammer.png)
791 kg, 4WD, Full castor bottom, built way too fast. 40 picks

Title: Re: Scrap Daddy Design
Post by: G.K. on November 13, 2010, 03:35:02 PM

What weight?

Title: Re: Scrap Daddy Design
Post by: Sage on November 13, 2010, 04:06:50 PM

icepicks are awesome. looks like a nice setup. Good job.

But rammers suck xP

Title: Re: Scrap Daddy Design
Post by: Virus Bomb on November 13, 2010, 05:33:03 PM

looks cool, like the ice picks.

Title: Re: Scrap Daddy Design
Post by: J on November 13, 2010, 06:00:12 PM

Quote from: Scrap Daddy on July 30, 2010, 01:26:54 AM

Did pwn build a hw Flying Guillotine? Well I did and lol'd the first time I saw it finished.
(https://gametechmods.com/uploads/images/59841Flyin.PNG)

......How exactly did you-
From the current view, it looks like you went over that part-stacking limit O,o
Mind posting an insides and/or view of 1 of the legs, without the plows on it? I'm curios as to how you managed that.

Title: Re: Scrap Daddy Design
Post by: NFX on November 13, 2010, 06:01:40 PM

Looks great. I must klone this immediately to practice my setup skillz. =P I do like the use of icepicks as well, it gives the machine a very rustic feel.

Title: Re: Scrap Daddy Design
Post by: Pwnator on November 13, 2010, 07:43:46 PM

Quote from: Virus Bomb on November 13, 2010, 05:33:03 PM

looks cool, like the ice picks.

STOP COMPLIMENTING YOURSELF AHAHAHAHAHAHAHAHA

Title: Re: Scrap Daddy Design
Post by: Naryar on November 14, 2010, 03:36:31 AM

Ice picks ? Eh. Does it really does more damage than a full ironed or razored one ?

Next, make one with bear claws

Title: Re: Scrap Daddy Design
Post by: JoeBlo on November 14, 2010, 03:49:49 AM

Quote from: Naryar on November 14, 2010, 03:36:31 AM

Does it really does more damage than a full ironed or razored one ?

dont know about damage but it craps over such robots in the looks department

Title: Re: Scrap Daddy Design
Post by: Gazea2 on November 14, 2010, 03:52:31 AM

[shamelessplug] It would be great if you could create a team for my A.I pack. [/shamelessplug]

That bot is the definition of awesomeness. How is the damage?

Title: Re: Scrap Daddy Design
Post by: GameKing3 on November 16, 2010, 09:03:23 PM

Quote from: Scrap Daddy on November 13, 2010, 03:33:24 PM

Ohhhhhh stock
(https://gametechmods.com/uploads/images/57457Icepickrammer.png)
791 kg, 4WD, Full castor bottom, built way too fast. 40 picks

That looks really awesome.

Title: Re: Scrap Daddy Design
Post by: That Robot is a Spy! on November 20, 2010, 11:54:18 AM

Quote from: Scrap Daddy on July 25, 2010, 10:04:08 PM

LOOK SOMETHING GOOD.
(https://gametechmods.com/uploads/images/30679VSmacess.PNG)
4wd, selfrights nicely, AWESOME wedges.

Looks very decent.

Title: Re: Scrap Daddy Design
Post by: kill343gs on November 20, 2010, 09:37:45 PM

I actually missed that drumbot... Cool! That's like what I wish my building looked like.

Title: Re: Scrap Daddy Design
Post by: Somebody on November 21, 2010, 04:39:31 PM

I missed that one too...

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on November 21, 2010, 10:26:30 PM

(https://gametechmods.com/uploads/images/83382AWflailsns.png)
An anweight SnS.

P.S. its unstable

Title: Re: Scrap Daddy Design
Post by: 70 CUDA on November 22, 2010, 01:21:41 AM

i bet it is. to good for me to say anything. other then its cool to see an AW SNS

Title: Re: Scrap Daddy Design
Post by: FOTEPX on November 22, 2010, 03:02:39 AM

Angle some of the razors up and some of them down, that should fix your problems. Also, Armour? Weight? Finally, I'm pretty sure you can make that chassis just a BIT smaller.

Title: Re: Scrap Daddy Design
Post by: Pwnator on November 22, 2010, 06:40:48 PM

Quote from: FOTEPX on November 22, 2010, 03:02:39 AM

Weight?

SD's not stupid enough to go way under the limit.

Quote from: FOTEPX on November 22, 2010, 03:02:39 AM

Finally, I'm pretty sure you can make that chassis just a BIT smaller.

What good would that do?

Title: Re: Scrap Daddy Design
Post by: NFX on November 22, 2010, 06:45:28 PM

Might be unstable because the weapon arm is attached to an axle mount.

16kg DSA chassis sounds okay. Depends if there's only one pink in there or not.

Title: Re: Scrap Daddy Design
Post by: Sparkey98 on November 22, 2010, 07:21:16 PM

Quote from: FOTEPX on November 22, 2010, 03:02:39 AM

Angle some of the razors up and some of them down, that should fix your problems. Also, Armour? Weight? Finally, I'm pretty sure you can make that chassis just a BIT smaller.

What are you talking about?
Razor problem: Scrap knows what he's doing
Armour: does it mater? I'm sure it's plastic
Weight: Lightweight. I'd bet $20 it's right on the limit
Chassis: heck no, you try making it smaller.

Title: Re: Scrap Daddy Design
Post by: FOTEPX on November 22, 2010, 07:52:06 PM

Quote from: Sypher878 on November 22, 2010, 07:21:16 PM

Quote from: FOTEPX on November 22, 2010, 03:02:39 AM

Angle some of the razors up and some of them down, that should fix your problems. Also, Armour? Weight? Finally, I'm pretty sure you can make that chassis just a BIT smaller.

What are you talking about?
Razor problem: Scrap knows what he's doing
Eh, I'll be honest, you're right on this one. Thought it was a problem with the weapon tippin' up or summat.
Armour: does it mater? I'm sure it's plastic
Yes it does, and I want an answer from Scrap.
Weight: Lightweight. I'd bet $20 it's right on the limit

Quote from: Scrap Daddy on November 21, 2010, 10:26:30 PM

An anweight SnS.

Chassis: heck no, you try making it smaller.
If he sends me it, I will.

Title: Re: Scrap Daddy Design
Post by: Sage on November 22, 2010, 07:56:53 PM

ohhh FOTEPX. Stop saying stuff that doesn't help anyone. Sure you can make the chassis a little smaller. Now tell me, what will you with with the extra .5 kg or so you get? Oh and by the way, the bigger the chassis the more stable and the more HEALTH. I say a bigger chassis is much better in this instance, because it's the best use of the kg for this bot.

Title: Re: Scrap Daddy Design
Post by: Pwnator on November 22, 2010, 08:01:04 PM

Also, I never really understood the mechanics of stock flails. Is there a certain weapon weight/drive power ratio limit where it just won't flail anymore? My guess is that a HPZ might be too powerful for a AW flail and the chassis rotates instead of the weapons.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on November 22, 2010, 09:07:59 PM

Weight is exactly 125.0 with DSA, and im not making the chassis smaller since I purposely made the chassis bigger for max HP. I might end up ditching the flail for an anchor with a static weapon mount and perhaps regular ztek drive.

Also I plan to post a bot every week from now on in either Stock or DSL. (MORE STOCK THOUGH HELL YEAH.)

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on November 23, 2010, 07:53:52 PM

lalalallalallalalallal
(https://gametechmods.com/uploads/images/44281VS.png)
2 blacks, dsa, 4wd, got some good wedges. Originally planned to be a single drum(and probably wikll be when i'm done.)

Title: Re: Scrap Daddy Design
Post by: Naryar on November 23, 2010, 08:07:24 PM

Aren't straight casters better ?

Title: Re: Scrap Daddy Design
Post by: 70 CUDA on November 23, 2010, 08:53:58 PM

maby but that thing is BAD A**! good job SD

Title: Re: Scrap Daddy Design
Post by: Sage on November 23, 2010, 09:15:40 PM

Irons seem to be blocking the drums a bit, razors could be angled out a bit more, looks bouncy/bad wedges (could be wrong) but awesome job SD

Title: Re: Scrap Daddy Design
Post by: kill343gs on November 23, 2010, 09:43:11 PM

Like I said the other day, you are the builder I wish i was.

Title: Re: Scrap Daddy Design
Post by: Pwnator on November 24, 2010, 02:26:33 AM

DARNIT! I WAS ABOUT TO FINISH MY MW DUAL VS THEN YOU POST THIS!

Still <3

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on January 15, 2011, 04:18:28 PM

Well, I usually don't post HS or generic stuff, but whatever, I'm just going to post almost everything I build now.
(https://gametechmods.com/uploads/images/64210quark.png)
Might be the first HS I've posted? Basically Quark(?) with DSA and no havok.

(https://gametechmods.com/uploads/images/22487Swordfish.png)
Random SnS. Not bad, DSA.

(https://gametechmods.com/uploads/images/36889whatisthisidoneven.png)
I don't even know what this is.


Expect a heavyweight tonight as well as my CC4 bot.

Title: Re: Scrap Daddy Design
Post by: FOTEPX on January 15, 2011, 04:20:32 PM

Love the first one, Confused an an awesome way by the third one, but the second looks a bit... Meh...

Common.

Title: Re: Scrap Daddy Design
Post by: cephalopod on January 15, 2011, 04:21:31 PM

Last one made me laugh with joy at how awesomely odd yet kinda useless it looks :P

Title: Re: Scrap Daddy Design
Post by: Stagfish on January 15, 2011, 04:22:20 PM

I love the last one.

Title: Re: Scrap Daddy Design
Post by: Sparkey98 on January 15, 2011, 04:22:51 PM

Quote from: FOTEPX on January 15, 2011, 04:20:32 PM

Love the first one, Confused an an awesome way by the third one, but the second looks a bit... Meh...

Common.

If by meh you mean awsome.

Title: Re: Scrap Daddy Design
Post by: FOTEPX on January 15, 2011, 04:24:03 PM

Quote from: Sypher878 on January 15, 2011, 04:22:51 PM

Quote from: FOTEPX on January 15, 2011, 04:20:32 PM

Love the first one, Confused an an awesome way by the third one, but the second looks a bit... Meh...

Common.

If by meh you mean awsome.

No, I mean it's common. I like to see some originality.

For me, Good ideas > Effective, but overused

Title: Re: Scrap Daddy Design
Post by: Sparkey98 on January 15, 2011, 04:24:33 PM

Quote from: FOTEPX on January 15, 2011, 04:24:03 PM

Quote from: Sypher878 on January 15, 2011, 04:22:51 PM

Quote from: FOTEPX on January 15, 2011, 04:20:32 PM

Love the first one, Confused an an awesome way by the third one, but the second looks a bit... Meh...

Common.

If by meh you mean awsome.

No, I mean it's common. I like to see some originality.

For me, Good ideas > Effective, but overused

It's still hard to pull off

Title: Re: Scrap Daddy Design
Post by: FOTEPX on January 15, 2011, 04:26:39 PM

Quote from: Sypher878 on January 15, 2011, 04:24:33 PM

Quote from: FOTEPX on January 15, 2011, 04:24:03 PM

Quote from: Sypher878 on January 15, 2011, 04:22:51 PM

Quote from: FOTEPX on January 15, 2011, 04:20:32 PM

Love the first one, Confused an an awesome way by the third one, but the second looks a bit... Meh...

Common.

If by meh you mean awsome.

No, I mean it's common. I like to see some originality.

For me, Good ideas > Effective, but overused

It's still hard to pull off

It sure is, but that's just one of the challenges of Stock: Making a good bot type that's never been done before.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on January 15, 2011, 05:08:33 PM

boom.
(https://gametechmods.com/uploads/images/19098FS.png)

Title: Re: Scrap Daddy Design
Post by: FOTEPX on January 15, 2011, 05:10:36 PM

I just jizzed in my pants over how awesome and win that bot is.

One mo, I gotta go change.

EDIT: Can you please send me it?

Title: Re: Scrap Daddy Design
Post by: Vertigo on January 15, 2011, 05:13:16 PM

<3

Thats awesome

Title: Re: Scrap Daddy Design
Post by: Stagfish on January 15, 2011, 05:14:43 PM

That looks really mean.

Although i'm not sure about the wedges effectiveness.

Title: Re: Scrap Daddy Design
Post by: FOTEPX on January 15, 2011, 05:15:38 PM

Quote from: Vertigo on January 15, 2011, 05:13:16 PM

<3

Thats awesome

It's more than awesome, it's a magnificent masterpiece which words cannot sufficiently describe enough to satisfy the needs that such an epic bots demand. This is the FS version of Nirvana.

Title: Re: Scrap Daddy Design
Post by: Sparkey98 on January 15, 2011, 05:17:24 PM

Quote from: FOTEPX on January 15, 2011, 05:15:38 PM

Quote from: Vertigo on January 15, 2011, 05:13:16 PM

<3

Thats awesome

It's more than awesome, it's a magnificent masterpiece which words cannot sufficiently describe enough to satisfy the needs that such an epic bots demand. This is the FS version of Nirvana.

No. More like "Kill 'em all" in bot form.

Title: Re: Scrap Daddy Design
Post by: FOTEPX on January 15, 2011, 05:18:26 PM

Quote from: Sypher878 on January 15, 2011, 05:17:24 PM

Quote from: FOTEPX on January 15, 2011, 05:15:38 PM

Quote from: Vertigo on January 15, 2011, 05:13:16 PM

<3

Thats awesome

It's more than awesome, it's a magnificent masterpiece which words cannot sufficiently describe enough to satisfy the needs that such an epic bots demand. This is the FS version of Nirvana.

No. More like "Kill 'em all" in bot form.

No, it's the best FS ever made in the history of mankind.

Scrap Daddy, I grovel at your feet.

Title: Re: Scrap Daddy Design
Post by: Vertigo on January 15, 2011, 05:19:19 PM

Quote from: FOTEPX on January 15, 2011, 05:18:26 PM

Quote from: Sypher878 on January 15, 2011, 05:17:24 PM

Quote from: FOTEPX on January 15, 2011, 05:15:38 PM

Quote from: Vertigo on January 15, 2011, 05:13:16 PM

<3

Thats awesome

It's more than awesome, it's a magnificent masterpiece which words cannot sufficiently describe enough to satisfy the needs that such an epic bots demand. This is the FS version of Nirvana.

No. More like "Kill 'em all" in bot form.

No, it's the best FS ever made in the history of mankind.

Scrap Daddy, I grovel at your feet.

Hahaha you said Virus Bomb before :P

Title: Re: Scrap Daddy Design
Post by: FOTEPX on January 15, 2011, 05:21:50 PM

I know, problem?

Anyways Scrap, could you please put that on Robot Exchange?

EDIT: I KEEP GETTING THEM MIXED UP >_<

Title: Re: Scrap Daddy Design
Post by: G.K. on January 15, 2011, 05:32:32 PM

Like KAiZA but with Razors. Looks epic.

Title: Re: Scrap Daddy Design
Post by: Scorpion on January 15, 2011, 05:59:14 PM

Quote from: Sypher878 on January 15, 2011, 05:17:24 PM

Quote from: FOTEPX on January 15, 2011, 05:15:38 PM

Quote from: Vertigo on January 15, 2011, 05:13:16 PM

<3

Thats awesome

It's more than awesome, it's a magnificent masterpiece which words cannot sufficiently describe enough to satisfy the needs that such an epic bots demand. This is the FS version of Nirvana.

No. More like "Kill 'em all" in bot form.

Well, kill em all was before metallica had really developed their own proper sound, so it's actu- ZOMG AWESOME BOT!!
Erm, yes, that does look very good, are the two central spinners powered with RADs aswell?

Title: Re: Scrap Daddy Design
Post by: Pwnator on January 15, 2011, 08:21:37 PM

Sage, screw Core Drill. You got your Coal Miner right there. :P

Title: Re: Scrap Daddy Design
Post by: NFX on January 15, 2011, 08:29:08 PM

Holy **** on a **** sandwich with **** on top. And a side order of ****.

That is one badass-looking FS. It looks almost perfectly angled as well. Are RADs enough to cause damage, even if they are Snapper loaded?

Title: Re: Scrap Daddy Design
Post by: Sage on January 15, 2011, 10:53:29 PM

Quote from: Pwnator on January 15, 2011, 08:21:37 PM

Sage, screw Core Drill. You got your Coal Miner right there. :P

Perhaps! But to be honest I think having those two high RADS are impeding on it's undercutting capabilities, like the razors won't reach the bottom of the robot as effectively. Did you test it scrap?

Title: Re: Scrap Daddy Design
Post by: Squirrel_Monkey on January 16, 2011, 04:54:42 AM

Can I get a better view of the poker?

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on January 21, 2011, 08:04:30 PM

random lightweight
(https://gametechmods.com/uploads/images/38434LWpoker.png)

Title: Re: Scrap Daddy Design
Post by: Sage on January 21, 2011, 09:57:44 PM

SCRAP. why is your stock showcase smaller than your DSL showcase

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on January 21, 2011, 10:49:35 PM

uhhhh im working on that,

(plus no one comments on stock bots. *hint hint*)

Title: Re: Scrap Daddy Design
Post by: Pwnator on January 21, 2011, 10:55:27 PM

Quote from: Sage on January 21, 2011, 09:57:44 PM

SCRAP. why is your stock showcase smaller than your DSL showcase

Because Scrap doesn't need to rebuild his stock bots. :P

Title: Re: Scrap Daddy Design
Post by: Reier on January 21, 2011, 11:29:56 PM

Because DSL > Stock   :trollface

Title: Re: Scrap Daddy Design
Post by: kill343gs on January 22, 2011, 12:36:54 AM

You have the same building style as Vertigo002 from back in the day and that's why I love you. You're everything I wish I ever was as a stock builder.

Title: Re: Scrap Daddy Design
Post by: R0B0SH4RK on January 24, 2011, 01:56:17 AM

Quote from: Scrap Daddy on January 21, 2011, 10:49:35 PM

(plus no one comments on stock bots. *hint hint*)

FEAR NOT FOR I HAVE RETURNED. NOT FOR LONG HOWEVER. SORRY TO DISAPPOINT.
 
'Sup GTMs
 
Scrap -
 
1. I'd flip the setup on the poker and have the piston at the top with the razors pointing down. As it is, it looks like wedges can slide right underneath with little to no damage.
 
2. We're vets now? Cool. HIIIIIIIGH FIVE.
 
3. We should play some L4D2 or something someday. Mabye if I'm not playing Xbox with my IRL friends and family.
 
4. Why the heck is everybody ACAMS now? It's confusing.
 

Title: Re: Scrap Daddy Design
Post by: Clickbeetle on January 24, 2011, 02:05:03 AM

Quote from: R0B0SH4RK on January 24, 2011, 01:56:17 AM

1. I'd flip the setup on the poker and have the piston at the top with the razors pointing down. As it is, it looks like wedges can slide right underneath with little to no damage.

But on the other hand, it would be quite an effective HS-killer as it is now.  HS's are probably a bigger threat than wedges in the LW division.


Oh, and also obligatory HW FS is awesome comment.  :mrgreen:

Title: Re: Scrap Daddy Design
Post by: JoeBlo on January 24, 2011, 02:13:18 AM

:O ROBO *running hug*

We (Sage, Pwn, Scrap and Myself) should get you in on our plans for Stock now your back..

Pretty cool the day I ask about your return and you do.. isnt magic awesome?

------------

Off topic aside.. I agree with Click here.. LW HS robots appear to be more of a trend then wedges..

Title: Re: Scrap Daddy Design
Post by: Sage on January 24, 2011, 02:30:36 AM

R0B0!

yay

Title: Re: Scrap Daddy Design
Post by: Naryar on January 24, 2011, 04:06:03 AM

R0B00000000000000000000000 <3

Title: Re: Scrap Daddy Design
Post by: Badnik96 on January 24, 2011, 07:13:05 AM

yayz its R0B0

Title: Re: Scrap Daddy Design
Post by: Naryar on January 24, 2011, 07:27:25 AM

Quote from: Reier on January 21, 2011, 11:29:56 PM

Because DSL > Stock   :trollface

I forgot to QFT this

Title: Re: Scrap Daddy Design
Post by: NFX on January 24, 2011, 08:18:50 AM

Hey, R0B0. Nice to see you around again. How's things? =)

I really do like the look of the LW Poker. I think it would work better as an HS-Killer rather than going after wedges, which as Click said aren't as prevolent in the LW division. I'm also slightly annoyed by it, because a CB/Nifty Stack seems to be the one stack that everyone else can do and I can't. But it looks very cool, reminds me of Interceptor a little bit.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on January 24, 2011, 04:18:37 PM

R00000000BBBB000000

Title: Re: Scrap Daddy Design
Post by: Somebody on January 24, 2011, 04:27:29 PM

ROBO!!! The ACAMS thing is kinda like the Pikabob meme...

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on January 30, 2011, 12:14:57 AM

weeeeee
(https://gametechmods.com/uploads/images/78115hankypanky.png)
rupting wammer? yes.

psst check the file name

Title: Re: Scrap Daddy Design
Post by: R0B0SH4RK on January 30, 2011, 01:29:00 PM

Dude I wanted to do that one >:(

If you replaced the small wedges with two iron spikes on each end, would it still rupt as well?

Title: Re: Scrap Daddy Design
Post by: Scorpion on January 30, 2011, 03:20:04 PM

Looking good, i like the idea behind it.
How do the extenders hold up, they look lie they're sticking out the chassis there to me, do they get damaged much there?

Title: Re: Scrap Daddy Design
Post by: Sage on January 30, 2011, 10:39:02 PM

(https://gametechmods.com/uploads/images/54512hgbfdbd.png)

Title: Re: Scrap Daddy Design
Post by: Pwnator on January 31, 2011, 12:49:21 AM

Lawl I had something else in mind for that, but it's still awesome. :D

Title: Re: Scrap Daddy Design
Post by: FOTEPX on January 31, 2011, 03:06:16 AM

Quote from: Sage on January 30, 2011, 10:39:02 PM

(https://gametechmods.com/uploads/images/54512hgbfdbd.png)

Looks great, Sage. Also:

Quote from: Sage on January 30, 2011, 10:39:02 PM

https://gametechmods.com/uploads/images/54512hgbfdbd.png (https://gametechmods.com/uploads/images/54512hgbfdbd.png)

Great file name, bro.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on February 05, 2011, 10:40:49 PM

a couple o HS
(https://gametechmods.com/uploads/images/20907randomMWHS.png)
HP Z-Tek Drive, DSA, 2 castors.
(https://gametechmods.com/uploads/images/809603Sns.png)
random SnS

Title: Re: Scrap Daddy Design
Post by: NFX on February 05, 2011, 10:44:23 PM

SnS looks brilliant. I can't help thinking that the HS's casters would be better placed on the underside.

Title: Re: Scrap Daddy Design
Post by: Pwnator on February 05, 2011, 11:00:34 PM

Is the first one the new REVENGE?

AND STOP POSTING MY UNSHOWCASED BOTS. THAT SECOND ONE LOOKS ALMOST EXACTLY LIKE IT O_O

Title: Re: Scrap Daddy Design
Post by: Reier on February 07, 2011, 09:50:12 AM

Stacked? lol

Title: Re: Scrap Daddy Design
Post by: J on February 07, 2011, 11:26:07 PM

Quote from: Larrain on February 07, 2011, 12:17:32 PM

OF COURSE but it's position is uncommon to me. xD

Stacks can usually appear in random ways.
Since you almost always have to rotate and at least 1 of the parts.

Title: Re: Scrap Daddy Design
Post by: Clickbeetle on February 12, 2011, 08:13:58 PM

Is the SnS good?  It's certainly original enough.


So many triangles on it... it should be called Triforce, or Bermuda Triangle, or even Triangle Inequality... something triangly.

Title: Re: Scrap Daddy Design
Post by: FOTEPX on February 12, 2011, 08:15:41 PM

List of possible names:
Triforce
Bermuda Triangle
Triangle Inequality
Trifecta
Triad
Try-angle
Trygle (Beyblade <3)

Title: Re: Scrap Daddy Design
Post by: Somebody on February 12, 2011, 09:35:17 PM

Name it Triumvirate.

Title: Re: Scrap Daddy Design
Post by: ty4er on February 13, 2011, 04:22:55 AM

Tri-ing hard to think of a name

Title: Re: Scrap Daddy Design
Post by: martymidget on February 13, 2011, 04:52:18 AM

Cosine Rules.

-waits to be hurt by people- :P

Title: Re: Scrap Daddy Design
Post by: infiniteinertia on March 06, 2011, 11:50:10 AM

SD, teh master is back

Title: Re: Scrap Daddy Design
Post by: freeziez on March 06, 2011, 03:47:13 PM

You should name it, "Tri-ing".

Title: Re: Scrap Daddy Design
Post by: infiniteinertia on March 06, 2011, 06:34:37 PM

No.

Title: Re: Scrap Daddy Design
Post by: Sparkey98 on March 06, 2011, 06:49:45 PM

Trinitrotoluene?

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on March 19, 2011, 12:20:24 PM

I'll just post this for now since the other bot is being a pita. Should post it today or tomorrow.
(https://gametechmods.com/uploads/images/34328randomlwhs.png)
DSA.

Title: Re: Scrap Daddy Design
Post by: Scorpion on March 19, 2011, 12:25:54 PM

Simples, but nice and neat bot.
And pita? You mean it's being pwned by inferior bots?

Title: Re: Scrap Daddy Design
Post by: Jonzu95 on March 19, 2011, 12:26:39 PM

pita = Pain in the ass

Title: Re: Scrap Daddy Design
Post by: Scorpion on March 19, 2011, 12:29:18 PM

Aaah, so it's not just a random nonsensical name Nar came up with.
You learn something new every day.

Title: Re: Scrap Daddy Design
Post by: NFX on March 19, 2011, 01:41:52 PM

Nar's PitA 8 did stand for Pain in the Ass, I think.

But the bot actually looks pretty good, I reckon.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on March 23, 2011, 08:22:25 PM

Stock flails? Stock flails.
(https://gametechmods.com/uploads/images/27730Flail.png)

Title: Re: Scrap Daddy Design
Post by: Sage on March 23, 2011, 08:32:51 PM

Sad thing about stock flails is they so heavy. Hows it perform? Wedges look meh

but still awesome.

Title: Re: Scrap Daddy Design
Post by: Clickbeetle on March 27, 2011, 06:25:08 PM

Quote from: Sage on March 23, 2011, 08:32:51 PM

Sad thing about stock flails is they so heavy.

Also that they're not limited so they will spin around backwards, exposing the weak extenders and increasing spinup time.


Cool bot, could be an upgrade to The Possessed Bee.

Title: Re: Scrap Daddy Design
Post by: Naryar on March 27, 2011, 07:56:24 PM

Awesome !

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on April 17, 2011, 05:10:34 PM

yeah, i'll post this
(https://gametechmods.com/uploads/images/57203Dissident.png)
798.3

Title: Re: Scrap Daddy Design
Post by: FOTEPX on April 17, 2011, 05:12:17 PM

Oh god, that's so epic. Please send it to me.

Title: Re: Scrap Daddy Design
Post by: NFX on April 17, 2011, 05:13:10 PM

Niiiiiice. Does the front of the chassis get hit at all?

Title: Re: Scrap Daddy Design
Post by: Scorpion on April 17, 2011, 05:25:55 PM

Smexy, nice name too.

Title: Re: Scrap Daddy Design
Post by: Virus Bomb on April 17, 2011, 05:32:34 PM

<33333333

Title: Re: Scrap Daddy Design
Post by: Jonzu95 on April 17, 2011, 05:51:16 PM

Very Sweet. :3

Title: Re: Scrap Daddy Design
Post by: Reier on April 17, 2011, 06:27:42 PM

Yeah boyyy scrappy

Title: Re: Scrap Daddy Design
Post by: Sage on April 17, 2011, 08:26:29 PM

nice

Title: Re: Scrap Daddy Design
Post by: Enigm@ on April 17, 2011, 08:28:31 PM

Quote from: Scrap Daddy on April 17, 2011, 05:10:34 PM

yeah, i'll post this
(https://gametechmods.com/uploads/images/57203Dissident.png)
798.3

http://www.myfacewhen.com/52/ (http://www.myfacewhen.com/52/)

Title: Re: Scrap Daddy Design
Post by: FOTEPX on April 17, 2011, 08:40:20 PM

http://www.myfacewhen.com/233/ (http://www.myfacewhen.com/233/)

And the world ceases to exist.

-CARLTON© 1984

Title: Re: Scrap Daddy Design
Post by: Pwnator on April 17, 2011, 10:42:25 PM

Would be awesomer if the pistons were angled down a notch, but I guess there's nothing you can do with that.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on May 02, 2011, 09:56:30 PM

yeeeop
(https://gametechmods.com/uploads/images/62651MiteIV.png)
best version with the castors and ztek drive.


ill win one day !!!

Title: Re: Scrap Daddy Design
Post by: Sage on May 02, 2011, 10:21:31 PM

lol looks exactly like one of my splashes... :P

Title: Re: Scrap Daddy Design
Post by: J on May 03, 2011, 12:19:06 AM

Methinks you could remove the 2 casters and upgrade to HPs :O

Title: Re: Scrap Daddy Design
Post by: Pwnator on May 03, 2011, 01:25:51 AM

That's too much for a Nifty to handle.

Title: Re: Scrap Daddy Design
Post by: NFX on May 03, 2011, 09:32:55 AM

What if the motors were swapped around? If you had RAD drive and Z-Tek weaponry?

Title: Re: Scrap Daddy Design
Post by: Reier on May 03, 2011, 11:11:31 AM

It's more of a rammy chew bot that an average HS NFX

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on May 11, 2011, 09:16:59 PM

(https://gametechmods.com/uploads/images/1437Desolation.png)
BEST wedges ive ever made probably because everything is built off of the chassis.
before anyone asks, the insides
(https://gametechmods.com/uploads/images/37254DesolationInsides.png)

Title: Re: Scrap Daddy Design
Post by: Virus Bomb on May 11, 2011, 09:20:31 PM

sicksicksicksick

Title: Re: Scrap Daddy Design
Post by: Sage on May 11, 2011, 09:25:38 PM

liking those side RADs... :P

but so sick

Title: Re: Scrap Daddy Design
Post by: Pwnator on May 11, 2011, 09:36:46 PM

hnnnnnnnnnnnnnnngggggh

Title: Re: Scrap Daddy Design
Post by: J on May 11, 2011, 10:31:45 PM

I would love to clone it, but I cant stack the drive like that :/
Still, love the way you made it.

Title: Re: Scrap Daddy Design
Post by: Pwnator on May 11, 2011, 10:36:10 PM

You can't stack the drive. :P

Do the inner drive first, load the axles out and attach your wheels. Reload the axles out and attach the outer drive. :P

Title: Re: Scrap Daddy Design
Post by: J on May 11, 2011, 10:38:58 PM

Quote from: Pwnator on May 11, 2011, 10:36:10 PM

Do the inner drive first, load the axles out and attach your wheels. Reload the axles out and attach the outer drive. :P

Yea, that's just it, I never got the hand of axel loading :/

I'm such a scrub when it comes to all these RA2 tricks
qq

Title: Re: Scrap Daddy Design
Post by: Scorpion on May 12, 2011, 01:55:57 PM

Wow, that bot is da smex , awesome work.

Title: Re: Scrap Daddy Design
Post by: NFX on May 12, 2011, 02:07:23 PM

Awesomeness in a box. =D

Title: Re: Scrap Daddy Design
Post by: R0B0SH4RK on May 12, 2011, 04:19:26 PM

Dat drum :O

How's the damage? I haven't really been able to make a drum like that to be very damaging, and the bracket wedges look like they'd hinder the gut-ripping factor.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on May 14, 2011, 11:04:56 PM

The drum actually does great damage which was pretty surprising

and now this
(https://gametechmods.com/uploads/images/26563321Blastoff.png)
8 snappers, does tricks n stuff

Title: Re: Scrap Daddy Design
Post by: Clickbeetle on May 14, 2011, 11:33:42 PM

How many razors?

Looks dangerous.  Emergency wedges are questionable though.  And lol at random spare-weight extender armor.

Title: Re: Scrap Daddy Design
Post by: Sage on May 14, 2011, 11:45:42 PM

ooooo i like it! but yea i hope the wedges are still good.

Title: Re: Scrap Daddy Design
Post by: Pwnator on May 15, 2011, 01:46:09 AM

lolextenderarmor

And that would make a sweet 321 rebuild. Now we need to get ReStocked finished ASAP so we can improve SCv4 as well. :P

Title: Re: Scrap Daddy Design
Post by: Somebody on May 17, 2011, 08:47:27 PM

Make the extender red so its sage-proof

Title: Re: Scrap Daddy Design
Post by: FOTEPX on May 18, 2011, 02:00:24 AM

Quote from: Somebody on May 17, 2011, 08:47:27 PM

Make the extender red so its sage-proof

What does Sage have against red extenders anyway?

Title: Re: Scrap Daddy Design
Post by: Pwnator on May 18, 2011, 02:05:43 AM

Quote from: FOTEPX on May 18, 2011, 02:00:24 AM

Quote from: Somebody on May 17, 2011, 08:47:27 PM

Make the extender red so its sage-proof

What does Sage have against red extenders anyway?

He claims they're ugly, though for some reason I spot some on a lot of his bots. :P

Title: Re: Scrap Daddy Design
Post by: Fracture on May 18, 2011, 06:22:07 AM

I only use red extenders because it's easier to see and rotate them to face a certain way....unless I want the bot to go with some black paintjob or something.

Title: Re: Scrap Daddy Design
Post by: JoeBlo on May 18, 2011, 06:54:28 AM

Quote from: Pwnator on May 18, 2011, 02:05:43 AM

He claims they're ugly,

Joining this Bandwagon :P

Title: Re: Scrap Daddy Design
Post by: J on May 18, 2011, 01:59:29 PM

Insides plz.

Quote from: JoeBlo on May 18, 2011, 06:54:28 AM

Quote from: Pwnator on May 18, 2011, 02:05:43 AM

He claims they're ugly,

Joining this Bandwagon :P

*More of a reason why all my bots use red extenders*

Title: Re: Scrap Daddy Design
Post by: Sage on May 18, 2011, 02:59:15 PM

Quote from: Pwnator on May 18, 2011, 02:05:43 AM

Quote from: FOTEPX on May 18, 2011, 02:00:24 AM

Quote from: Somebody on May 17, 2011, 08:47:27 PM

Make the extender red so its sage-proof

What does Sage have against red extenders anyway?

He claims they're ugly, though for some reason I spot some on a lot of his bots. :P

WHICH BOTS. I WILL BURN THEM.

Title: Re: Scrap Daddy Design
Post by: Pwnator on May 19, 2011, 01:24:25 AM

Quote from: Sage on May 18, 2011, 02:59:15 PM

WHICH BOTS. I WILL BURN THEM.

You asked for it. :P

https://gametechmods.com/forums/index.php/topic,755.msg8926.html#msg8926 (https://gametechmods.com/forums/index.php/topic,755.msg8926.html#msg8926)
https://gametechmods.com/forums/index.php/topic,755.msg9059.html#msg9059 (https://gametechmods.com/forums/index.php/topic,755.msg9059.html#msg9059)
https://gametechmods.com/forums/index.php/topic,755.msg92097.html#msg92097 (https://gametechmods.com/forums/index.php/topic,755.msg92097.html#msg92097)
https://gametechmods.com/forums/index.php/topic,755.msg333473.html#msg333473 (https://gametechmods.com/forums/index.php/topic,755.msg333473.html#msg333473)

Plus some really old bots from the old forums which I'm too lazy to dig out from the nostalgia thread. :P



Oh, and is the 321 rebuild 4WD?

Title: Re: Scrap Daddy Design
Post by: Sage on May 19, 2011, 04:17:52 PM

Quote from: Pwnator on May 19, 2011, 01:24:25 AM

Quote from: Sage on May 18, 2011, 02:59:15 PM

WHICH BOTS. I WILL BURN THEM.

You asked for it. :P

https://gametechmods.com/forums/index.php/topic,755.msg8926.html#msg8926 (https://gametechmods.com/forums/index.php/topic,755.msg8926.html#msg8926)
https://gametechmods.com/forums/index.php/topic,755.msg9059.html#msg9059 (https://gametechmods.com/forums/index.php/topic,755.msg9059.html#msg9059)
https://gametechmods.com/forums/index.php/topic,755.msg92097.html#msg92097 (https://gametechmods.com/forums/index.php/topic,755.msg92097.html#msg92097)
https://gametechmods.com/forums/index.php/topic,755.msg333473.html#msg333473 (https://gametechmods.com/forums/index.php/topic,755.msg333473.html#msg333473)

Plus some really old bots from the old forums which I'm too lazy to dig out from the nostalgia thread. :P



Oh, and is the 321 rebuild 4WD?

oh well yea duh the hammer bots >.>

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on June 04, 2011, 10:19:08 PM

posting this because im all kinds of excited for the challenge
(https://gametechmods.com/uploads/images/52364Trinity.png)

Title: Re: Scrap Daddy Design
Post by: Sage on June 05, 2011, 12:20:52 AM

I HATE EVERYTHING, INCLUDING THIS BOT.

Title: Re: Scrap Daddy Design
Post by: J on June 05, 2011, 12:24:11 AM

Quote from: Sage on June 05, 2011, 12:20:52 AM

I HATE EVERYTHING, INCLUDING THIS BOT.

Oh you.

Title: Re: Scrap Daddy Design
Post by: Clickbeetle on June 05, 2011, 12:25:25 AM

Quote from: Sage on June 05, 2011, 12:20:52 AM

I HATE EVERYTHING, INCLUDING THIS BOT.

(https://gametechmods.com/uploads/images/73217sdtrinitybw.png)


Is that better? :P

Title: Re: Scrap Daddy Design
Post by: TriTon on June 05, 2011, 12:26:07 AM

Quote from: Clickbeetle on June 05, 2011, 12:25:25 AM

Quote from: Sage on June 05, 2011, 12:20:52 AM

I HATE EVERYTHING, INCLUDING THIS BOT.

(https://gametechmods.com/uploads/images/73217sdtrinitybw.png)


Is that better? :P

Gray extenders?

Title: Re: Scrap Daddy Design
Post by: J on June 05, 2011, 12:26:51 AM

Quote from: TriTon on June 05, 2011, 12:26:07 AM

Quote from: Clickbeetle on June 05, 2011, 12:25:25 AM

Quote from: Sage on June 05, 2011, 12:20:52 AM

I HATE EVERYTHING, INCLUDING THIS BOT.

(https://gametechmods.com/uploads/images/73217sdtrinitybw.png)


Is that better? :P

Gray extenders?

Nah, Click just used the Black & White feature that Photoshop has.

Title: Re: Scrap Daddy Design
Post by: Sage on June 05, 2011, 12:27:40 AM

Damn scrap, I love it. Especially the hex/star shape, looks like it's made to spin.

BUT MINES STILL BETTER

Title: Re: Scrap Daddy Design
Post by: Pwnator on June 05, 2011, 02:15:36 AM

damn i should've put red extenders on my bot

Title: Re: Scrap Daddy Design
Post by: Vertigo on June 05, 2011, 02:45:34 AM

Awesome

Although, I do sort of agree with Sage, I haven't used a red extender since I joined these forums :P

Title: Re: Scrap Daddy Design
Post by: FOTEPX on June 05, 2011, 03:37:36 PM

Quote from: Scrap Daddy on June 04, 2011, 10:19:08 PM

posting this because im all kinds of excited for the challenge
(https://gametechmods.com/uploads/images/52364Trinity.png)

IT'S BEAUTIFUL

Title: Re: Scrap Daddy Design
Post by: Scorpion on June 05, 2011, 04:38:06 PM

Nice bot, can't wait to see it in action.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on June 25, 2011, 08:46:10 PM

this somehow ended up almost the same as Virus Bombs bot.
(https://gametechmods.com/uploads/images/73207chainedvs.png)
its chained though and kinda neat. those are the biggest discs btw

Title: Re: Scrap Daddy Design
Post by: Enigm@ on June 25, 2011, 08:46:54 PM

Reminds me of Digital Apocalypse. Perhaps the skin?

Title: Re: Scrap Daddy Design
Post by: Pwnator on June 25, 2011, 08:48:53 PM

oh scrappy u crazy

Title: Re: Scrap Daddy Design
Post by: GoldenFox93 on June 25, 2011, 08:49:41 PM

Quote from: Scrap Daddy on June 25, 2011, 08:46:10 PM

this somehow ended up almost the same as Virus Bombs bot.
(https://gametechmods.com/uploads/images/73207chainedvs.png)
its chained though and kinda neat. those are the biggest discs btw

Marvellous! It's like Mome Rath taking a Level in Badass   :claping

Title: Re: Scrap Daddy Design
Post by: J on June 25, 2011, 08:55:21 PM

Chained giant disks. Awesomesauce.
Hows it testing, btw?

Title: Re: Scrap Daddy Design
Post by: Naryar on June 27, 2011, 09:27:24 AM

WHOA ! Chained Alien Queen ?

Probably can't self right though...

Title: Re: Scrap Daddy Design
Post by: Badnik96 on June 27, 2011, 09:30:59 AM

holy sh*t

Title: Re: Scrap Daddy Design
Post by: NFX on June 27, 2011, 09:54:39 AM

Damn, that is one sweet bot. I'm not a fan of the flimsy extender work, though, but it looks destructive enough.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on June 30, 2011, 08:53:13 PM

my first bot for roboleague
(https://gametechmods.com/uploads/images/9584breezz.png)
dsa and the works

Title: Re: Scrap Daddy Design
Post by: Squirrel_Monkey on July 01, 2011, 02:44:06 AM

Yes! More exposed tops!
Looks cool, what drive? (Assumes HPZ)

Title: Re: Scrap Daddy Design
Post by: R0B0SH4RK on July 02, 2011, 03:43:25 PM

Nifty for power? Can't quite figure out the insides from those pics.

Title: Re: Scrap Daddy Design
Post by: NFX on July 02, 2011, 03:48:03 PM

I like the idea of this bot. It could do pretty well, if the wedges are good enough.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 07, 2011, 09:05:24 PM

I really like how this one turned out.
(https://gametechmods.com/uploads/images/56050BigDog.png)
ReStocked coming soooooooon

Title: Re: Scrap Daddy Design
Post by: Virus Bomb on July 07, 2011, 09:10:08 PM

<33333333

Title: Re: Scrap Daddy Design
Post by: J on July 07, 2011, 10:57:26 PM

Why do I get the feeling its a piston rammer?

Title: Re: Scrap Daddy Design
Post by: kill343gs on July 07, 2011, 10:59:17 PM

the amount of love i feel right now is unparalleled.

Title: Re: Scrap Daddy Design
Post by: J on July 07, 2011, 11:02:05 PM

Scrap, was this the result of "hax mode"?

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 07, 2011, 11:08:35 PM

No, like I said, we won't be using hax mode for any serious bots. No pistons either.

(https://gametechmods.com/uploads/images/87871BigDoginsides.png)

Title: Re: Scrap Daddy Design
Post by: The Zephyr on July 08, 2011, 01:21:57 AM

Woah, nice bot! I love the setup and the way it looks.

Title: Re: Scrap Daddy Design
Post by: Scorpion on July 08, 2011, 04:53:39 AM

DO WANT

Title: Re: Scrap Daddy Design
Post by: FOTEPX on July 08, 2011, 10:01:27 AM

OH GOD...

<3

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 30, 2011, 08:05:55 PM

An upgrade to an old bot.
(https://gametechmods.com/uploads/images/35071fssss.png)
Might not look like much was changed, but the entire setup is different. This time the weapon motors and drive are on two different snappers in an attempt to have the most stability as possible. It worked.

Title: Re: Scrap Daddy Design
Post by: Zog on July 30, 2011, 08:32:19 PM

MUST.  KNOW. HOW. TO. MAKE. SUCH. EPICNESS.

Title: Re: Scrap Daddy Design
Post by: Sage on July 31, 2011, 12:11:37 AM

lookin sick robo.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 31, 2011, 12:15:07 AM

Quote from: Sage on July 31, 2011, 12:11:37 AM

lookin sick robo.

:rage

Title: Re: Scrap Daddy Design
Post by: ashman12 on July 31, 2011, 12:48:31 AM

Very nice, SD.

Title: Re: Scrap Daddy Design
Post by: infiniteinertia on July 31, 2011, 01:21:03 AM

ive been gone way too long.

Title: Re: Scrap Daddy Design
Post by: Pwnator on July 31, 2011, 02:27:38 AM

Quote from: Scrap Daddy on July 31, 2011, 12:15:07 AM

Quote from: Sage on July 31, 2011, 12:11:37 AM

lookin sick robo.

:rage

:trollface


Still perplexed at the thought that the bot's chassis is just a box. O_O

Title: Re: Scrap Daddy Design
Post by: R0B0SH4RK on July 31, 2011, 02:45:47 AM

Quote from: Sage on July 31, 2011, 12:11:37 AM

lookin sick robo.

WHY THANK YOU SAGE.

Title: Re: Scrap Daddy Design
Post by: Naryar on July 31, 2011, 03:01:04 AM

Quote from: Pwnator on July 31, 2011, 02:27:38 AM

Quote from: Scrap Daddy on July 31, 2011, 12:15:07 AM

Quote from: Sage on July 31, 2011, 12:11:37 AM

lookin sick robo.

:rage

:trollface

olololol

Title: Re: Scrap Daddy Design
Post by: infiniteinertia on July 31, 2011, 09:47:04 AM

Sage was dealing with me in the wee morning hours. LEAVE HIM ALONE  :rage :rage :rage :rage :rage

Title: Re: Scrap Daddy Design
Post by: Jack Daniels on July 31, 2011, 09:55:43 AM

Why the sequential extenders with no blade protection?  I take it since each extender has its own HP they protect the weapons setup just a tad?

Title: Re: Scrap Daddy Design
Post by: infiniteinertia on July 31, 2011, 10:18:00 AM

Use teh AIMZ daaankins. We need to catch up :D

Title: Re: Scrap Daddy Design
Post by: NFX on July 31, 2011, 10:23:03 AM

Looks suitably epic.

Title: Re: Scrap Daddy Design
Post by: Sage on July 31, 2011, 10:59:31 AM

Quote from: Scrap Daddy on July 31, 2011, 12:15:07 AM

Quote from: Sage on July 31, 2011, 12:11:37 AM

lookin sick robo.

:rage

PAYBACK FOR YOUR CRAP COMMENT

Title: Re: Scrap Daddy Design
Post by: Reier on August 02, 2011, 05:32:21 PM

Lookin snazzy, scrapz

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on August 18, 2011, 03:17:51 PM

Honestly one of the best lightweights I have EVER built.
(https://gametechmods.com/uploads/images/76797LWvs2.png)
                                        (https://gametechmods.com/uploads/images/41205LWvsinsides.png)
DSA, I could have a smaller disc in favor of a castor underneath, but I think the bigger disc gives it more juggling power.

comments plz

Title: Re: Scrap Daddy Design
Post by: madman3 on August 18, 2011, 03:19:13 PM

Quote from: Scrap Daddy on August 18, 2011, 03:17:51 PM

Honestly one of the best lightweights I have EVER built.
(https://gametechmods.com/uploads/images/76797LWvs2.png)
                        (https://gametechmods.com/uploads/images/41205LWvsinsides.png)
DSA, I could have a smaller disc in favor of a castor underneath, but I think the bigger disc gives it more juggling power.

comments plz

Really nice. Odd to see angled drive in stock, and it does carry a sort of DSL style vibe.

Title: Re: Scrap Daddy Design
Post by: Badnik96 on August 18, 2011, 03:20:14 PM

that looks awesome

Title: Re: Scrap Daddy Design
Post by: Scorpion on August 18, 2011, 03:39:30 PM

Awesome, i agree with madman as well, it looks like you thought you were building in DSL ;P

Title: Re: Scrap Daddy Design
Post by: NFX on August 18, 2011, 03:39:51 PM

Damn, that looks seriously impressive. I wouldn't have thought of building it that way, I'd have thought it'd be too unstable at the start of the match.

Title: Re: Scrap Daddy Design
Post by: Somebody on August 18, 2011, 03:41:04 PM

Can it beat the crazy LW HS like Alter Ego?

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on August 18, 2011, 03:45:15 PM

I mean it doesn't absolutely rape HS. It can consistently beat Reaper, Cyclone, and Blood Leech but can only beat Tempus Fugit like maybe 40% of the time.

Title: Re: Scrap Daddy Design
Post by: Sage on August 18, 2011, 06:15:11 PM

If you stacked the anchor into the nifty, you might get enough weight for castor.

Title: Re: Scrap Daddy Design
Post by: J on August 18, 2011, 08:26:33 PM

I like how robots that resemble Backlash(inb4Joe) became a trend.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on August 19, 2011, 05:18:02 PM

(https://gametechmods.com/uploads/images/41036Barbershopchop.png)
                                                  (https://gametechmods.com/uploads/images/55401BSCinsides.png)

...coming soon(ish)!!!

Title: Re: Scrap Daddy Design
Post by: J on August 19, 2011, 05:19:18 PM

Sexy re-make is indeed sexy.

Title: Re: Scrap Daddy Design
Post by: NFX on August 19, 2011, 05:30:53 PM

Looking suitably awesome. Looks a bit like Mr. Tickles, I reckon.

Title: Re: Scrap Daddy Design
Post by: cephalopod on August 19, 2011, 05:47:45 PM

If I was a decent Stock builder, I'd aspire to build that style of LW VS. It's awesome. :D

Title: Re: Scrap Daddy Design
Post by: Sage on August 19, 2011, 06:47:01 PM

So sick scrap.

Title: Re: Scrap Daddy Design
Post by: Scorpion on August 19, 2011, 06:56:41 PM

The awesomeness physically hurts me.

Title: Re: Scrap Daddy Design
Post by: infiniteinertia on August 20, 2011, 11:04:49 AM

teh s3x0rz.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on August 28, 2011, 05:56:25 PM

ladies and gentlemen
(https://gametechmods.com/uploads/images/60199Deadlock.png)
whaddup sage

Title: Re: Scrap Daddy Design
Post by: Sage on August 28, 2011, 08:42:15 PM

Took you long enough!

Title: Re: Scrap Daddy Design
Post by: Naryar on August 28, 2011, 08:50:44 PM

What ladies ? :P

Looks pretty awesome.

Title: Re: Scrap Daddy Design
Post by: Jack Daniels on August 28, 2011, 08:59:22 PM

I like it.  How does it fare in combat though?  I can't help but feel that it pulls bots up and over too quick without juggling them much.  Just curious.

Title: Re: Scrap Daddy Design
Post by: Somebody on August 28, 2011, 08:59:26 PM

Quote from: Scrap Daddy on August 28, 2011, 05:56:25 PM

ladies and gentlemen

cuz scourge cares lol

Title: Re: Scrap Daddy Design
Post by: infiniteinertia on August 28, 2011, 11:06:15 PM

<333333333

Title: Re: Scrap Daddy Design
Post by: R0B0SH4RK on August 29, 2011, 02:11:58 AM

I cannot adequately describe what I think of this bot. So I'll let Youtube do it for me:

http://www.youtube.com/watch?v=eQ78s9hunBM# (http://www.youtube.com/watch?v=eQ78s9hunBM#)

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on September 25, 2011, 01:03:27 AM

built somthin
(https://gametechmods.com/uploads/images/66902BlackLung.png)

Title: Re: Scrap Daddy Design
Post by: Pwnator on September 25, 2011, 01:21:31 AM

You have just 1-upped Sage.

awwwww yeaaaaahhhhh

Title: Re: Scrap Daddy Design
Post by: JoeBlo on September 25, 2011, 01:44:17 AM

(http://files.sharenator.com/spit_coffee_RE_Wut-s576x416-126987-580.png)

Title: Re: Scrap Daddy Design
Post by: That Robot is a Spy! on September 25, 2011, 03:54:30 AM

Now that's pretty nice.

Title: Re: Scrap Daddy Design
Post by: NFX on September 25, 2011, 05:45:44 AM

Schweet. Could you swap the bracket wedge for a couple more razors, perhaps?

Title: Re: Scrap Daddy Design
Post by: ty4er on September 25, 2011, 06:26:47 AM

Don't they protect the motors though?

That does look awesome

Title: Re: Scrap Daddy Design
Post by: Urjak on September 25, 2011, 09:04:47 AM

I love the internal simplicity of the bot.

Title: Re: Scrap Daddy Design
Post by: Sage on September 25, 2011, 10:21:07 AM

Quote from: Pwnator on September 25, 2011, 01:21:31 AM

You have just 1-upped Sage.

awwwww yeaaaaahhhhh

LIES

Title: Re: Scrap Daddy Design
Post by: J on September 25, 2011, 11:41:42 AM

Quote from: Sage on September 25, 2011, 10:21:07 AM

Quote from: Pwnator on September 25, 2011, 01:21:31 AM

You have just 1-upped Sage.

awwwww yeaaaaahhhhh

LIES

Of course hes lining. The bot doesn't use any red extenders.
....Sage shoots me several times

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on December 14, 2011, 07:35:38 PM

(https://gametechmods.com/uploads/images/713InsaneAsylumII.png)
Be afraid.

Title: Re: Scrap Daddy Design
Post by: Fracture on December 14, 2011, 07:54:22 PM

O_O

Also that's a lot of casters...the chassis is larger than I thought. Or, I think this is more probable, the casters are covering way more than they need to. Also I think regular Z-teks can handle 3 irons.

I'm afraid.

Title: Re: Scrap Daddy Design
Post by: Sage on December 14, 2011, 08:03:43 PM

IM GOING ISANE!

yea you spelled insane wrong.


looks like something built during the glory days of stock... creative, fearsome, mixed weapons. Great job. I doubt its effectiveness without wedges, however.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on December 14, 2011, 08:10:58 PM

God damn it I made the splash smaller and typoed the second time hahah

Also I originally had a single wedgewith fewer castors but just wasn't good. The castors and ramplates are a better idea

Title: Re: Scrap Daddy Design
Post by: Virus Bomb on December 14, 2011, 08:47:03 PM

I don't why but it reminds me of something Pwn would make.

Title: Re: Scrap Daddy Design
Post by: Badnik96 on December 14, 2011, 09:01:56 PM

Keep the typo, it fits the name completely :P

Title: Re: Scrap Daddy Design
Post by: Pwnator on December 14, 2011, 09:29:46 PM

Quote from: Virus Bomb on December 14, 2011, 08:47:03 PM

I don't why but it reminds me of something Pwn would make.

Looks like something Ounce would make too.

(https://gametechmods.com/uploads/images/99943vorago2.PNG) + (https://gametechmods.com/uploads/images/34746screenshot_22.png) = (https://gametechmods.com/uploads/images/713InsaneAsylumII.png)

Title: Re: Scrap Daddy Design
Post by: Meganerdbomb on December 14, 2011, 10:02:42 PM

yay! face spinners!

Title: Re: Scrap Daddy Design
Post by: NFX on December 15, 2011, 06:06:20 AM

Looks very nice indeed. Good mix of Offense and Defense, I like that. =) Would 2 Blacks not be underpowering it slightly, though?

Title: Re: Scrap Daddy Design
Post by: Naryar on December 15, 2011, 01:40:08 PM

Looking very cool.

2 blacks for 9 motors is borderline indeed. It's not theoretically underpowered but it sure ain't gonna last 2 minutes.

Title: Re: Scrap Daddy Design
Post by: Clickbeetle on December 18, 2011, 09:36:51 PM

Quote from: Naryar on December 15, 2011, 01:40:08 PM

it sure ain't gonna last 2 minutes.

Well, from the looks of it, neither will the opponent so  :p
 
Really nice bot.  I'm curious how good it is against popups.

Title: Re: Scrap Daddy Design
Post by: Naryar on December 21, 2011, 04:24:51 AM

Quote from: Clickbeetle on December 18, 2011, 09:36:51 PM

Really nice bot.  I'm curious how BAD it is against popups.

Fixed  :p

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on August 14, 2012, 01:53:44 AM

find me a scarier bot, seriously
(https://gametechmods.com/uploads/images/12449deadlock2.png)
Deadlock*

Title: Re: Scrap Daddy Design
Post by: Gauche Suede on August 14, 2012, 02:01:32 AM

 :gawe:
OMG! that thing looks awesome!
but how's the FS'es doing with only a RAD to power them?

Title: Re: Scrap Daddy Design
Post by: Pwnator on August 14, 2012, 02:04:38 AM

I thought you posted Deadlock already?

[Edit] Oh, it has plows lolololololol


Also,

Quote from: Scrap Daddy on August 14, 2012, 01:53:44 AM

find me a scarier bot, seriously

(https://gametechmods.com/uploads/images/43794xxxx.png)

Title: Re: Scrap Daddy Design
Post by: NFX on August 14, 2012, 05:21:09 AM

Siiiiiiiiiiiick. I'm wondering how good the wedges are being angled like that, I remember getting told they'd be worse. And how does it do with the off-center weight distro of that HPZ on the top?

Title: Re: Scrap Daddy Design
Post by: Gazea2 on August 14, 2012, 06:51:59 AM

Angled wedges <33333
That looks awesome, dude.

Title: Re: Scrap Daddy Design
Post by: Naryar on August 14, 2012, 07:27:19 AM

Why the heck is sage best stock builder in the world anyways ? Scrap deserves this award.

Title: Re: Scrap Daddy Design
Post by: ty4er on August 14, 2012, 07:37:17 AM

dammit your designs are so simple yet so awesome


why

Title: Re: Scrap Daddy Design
Post by: System32 on August 14, 2012, 07:39:31 AM

Quote from: Naryar on August 14, 2012, 07:27:19 AM

Why the heck is sage best stock builder in the world anyways ? Scrap deserves this award.

Because he's the only one people genuinely remember, this forum has an unhealthy amount of pedestals for older members to stand on, most people now build DSL IRL or DSL in general...
 
 

Title: Re: Scrap Daddy Design
Post by: Virus Bomb on August 14, 2012, 11:43:42 AM

looks nice.

Quote from: Naryar on August 14, 2012, 07:27:19 AM

Why the heck is sage best stock builder in the world anyways ? Scrap deserves this award.

 


i always felt that pwn was a bit better than sage when that poll was taken...

Title: Re: Scrap Daddy Design
Post by: Mr. AS on August 14, 2012, 11:45:03 AM

awesome stuff as usual

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on August 14, 2012, 01:18:27 PM

Quote from: System32 on August 14, 2012, 07:39:31 AM

Quote from: Naryar on August 14, 2012, 07:27:19 AM

Why the heck is sage best stock builder in the world anyways ? Scrap deserves this award.

Because he's the only one people genuinely remember, this forum has an unhealthy amount of pedestals for older members to stand on, most people now build DSL IRL or DSL in general...

pffff ive always been better than sage  :mrgreen:  plus hes only been around like a few more months than me, not like hes been around much longer.


also more scary bots
(https://gametechmods.com/uploads/images/52392Parasite2.png)
Parasite with a ramplate? eeek. DSA, 1 black.


Pretty much rebuilding all of my old bots. AKA prepare your anuses for the return of LEECH.

Title: Re: Scrap Daddy Design
Post by: Sage on August 14, 2012, 02:47:49 PM

Looks great dude.

Quote from: Naryar on August 14, 2012, 07:27:19 AM

Why the heck is sage best stock builder in the world anyways ? Scrap deserves this award.

Cause beard.

And cause I beat scrap in the Trinity rumble match.

Title: Re: Scrap Daddy Design
Post by: madman3 on August 14, 2012, 04:42:35 PM

Quote from: Sage on August 14, 2012, 02:47:49 PM

Looks great dude.

Quote from: Naryar on August 14, 2012, 07:27:19 AM

Why the heck is sage best stock builder in the world anyways ? Scrap deserves this award.

Cause beard.
And cause I beat scrap in the Trinity rumble match.

Oh dammit, that reminds me that I should have asked Joe for the AI you used in that fight for my challenge against Sauce :P
Too late now  :(
Bot looks scary but very good.

Title: Re: Scrap Daddy Design
Post by: NFX on August 14, 2012, 05:27:58 PM

Looks very scary, if a little fragile. I need to build a bot like this.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on October 03, 2012, 12:07:11 AM

Scary bots
(https://gametechmods.com/uploads/images/42581Snssnss.png)
124.9

Title: Re: Scrap Daddy Design
Post by: Gauche Suede on October 03, 2012, 12:29:57 AM

Quote from: Scrap Daddy on October 03, 2012, 12:07:11 AM

Scary bots
(https://gametechmods.com/uploads/images/42581Snssnss.png)
124.9

update of nerdycomputerguy?

Title: Re: Scrap Daddy Design
Post by: ianh05 on October 03, 2012, 05:28:42 AM

Looks pretty good :)

Title: Re: Scrap Daddy Design
Post by: Mr. AS on October 03, 2012, 05:32:10 AM

this bot is sp00ky

also is it a rebuild of that aw flail sns you posted some time back

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on April 15, 2013, 10:34:57 AM

aaarbc team

(https://gametechmods.com/uploads/images/81811uno.png)
AW-Swave - boring cuz aws are boring
(https://gametechmods.com/uploads/images/63308duece.png)
BW-Sevah - cool little sns
(https://gametechmods.com/uploads/images/89412thres.png)
Cyborg II. Rebuilt, meant to be a Reckless Infiltrator esc bot.
(https://gametechmods.com/uploads/images/26086quatro.png)
Impending Doom- an old favorite of mine.
(https://gametechmods.com/uploads/images/61223cinco'.png)
Desolation - another old favorite.

Title: Re: Scrap Daddy Design
Post by: Mr. AS on April 15, 2013, 11:40:54 AM

lol swave looks just like an aw i built except mine has 2 pointy tips and a pole spike

all the other ones look cool though.

Title: Re: Scrap Daddy Design
Post by: Badnik96 on April 15, 2013, 12:40:53 PM

Desolation and Cyborg look awesome.

Title: Re: Scrap Daddy Design
Post by: Venko on April 15, 2013, 02:09:23 PM

So, you are building stock again, niiice...
I <3 Cyborg II
Don't forget to enter NvsF ;)

Title: Re: Scrap Daddy Design
Post by: Mecha on April 15, 2013, 02:14:33 PM

Awesome Bots Scrap,
i would love to see you in NvsF. :)

Title: Re: Scrap Daddy Design
Post by: J on April 15, 2013, 02:37:17 PM

Cyborg II looks fragile as heck. Hows it been testing anyway?
Also, mind if I see it's insides?

Title: Re: Scrap Daddy Design
Post by: Sage on April 16, 2013, 01:13:56 AM

wait, is there a tourney going on?

Title: Re: Scrap Daddy Design
Post by: ianh05 on April 16, 2013, 01:17:22 AM

Inf missed the boat and apparently Sage did too  :rage  maybe you 2 can still send teams and I will put your bots in bonus matches, that way you will both be included in the AI pack.

Title: Re: Scrap Daddy Design
Post by: Reier on April 16, 2013, 10:45:34 AM

What tourney?

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 21, 2013, 08:05:57 PM

yo yo
(https://gametechmods.com/uploads/images/92276VSSSSSSSS.png)
still tweakin this one, but its already scary

Title: Re: Scrap Daddy Design
Post by: Sage on July 21, 2013, 09:10:39 PM

Looks insane.
How do razors fare on VS?

Title: Re: Scrap Daddy Design
Post by: Trovaner on July 21, 2013, 11:45:10 PM

That looks pretty sick.

Given the razors' collision mesh, I doubt that the bot is very good at picking opponents up off the ground but I could be wrong. I like the slanted disks. Having it that way probably improves the stability of the bot and its ability to juggle the opponent.

Title: Re: Scrap Daddy Design
Post by: Naryar on July 22, 2013, 02:46:30 AM

so badass

I'd try using multiple samurai swords as stabilizers though instead of a rack of weapons, so the stabilizers are stronger overall.

Title: Re: Scrap Daddy Design
Post by: Mr. AS on July 23, 2013, 08:11:25 PM

it looks real cool alright. but i worry about the weapons lifespan...

Title: Re: Scrap Daddy Design
Post by: Bellay on August 30, 2013, 01:12:47 AM

hey.You've just done a god job.May you success.  :heart_smiley:

Title: Re: Scrap Daddy Design
Post by: Naryar on August 30, 2013, 05:07:40 AM

Quote from: Bellay on August 30, 2013, 01:12:47 AM

god job

Pretty much all that needs to be said. Seriously, every bot Scrap Daddy builds oozes testosterone from every pore.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 06, 2014, 07:09:58 PM

Hello friends
(https://gametechmods.com/uploads/images/37572Chuwee.png)
here's a nice lil dual fs that I just built. DSA, nifty, kool.

Title: Re: Scrap Daddy Design
Post by: KOS on July 06, 2014, 07:17:22 PM

Looks very good, does it work well with that ramplate as a wedge?

Title: Re: Scrap Daddy Design
Post by: RedAce on July 06, 2014, 07:19:41 PM

Nice job, that's a pretty kool bot.

Title: Re: Scrap Daddy Design
Post by: Sage on July 06, 2014, 08:00:12 PM

SO sick.

Title: Re: Scrap Daddy Design
Post by: Trovaner on July 07, 2014, 07:56:24 PM

I have my doubts about the wedge but it looks awesome.

Title: Re: Scrap Daddy Design
Post by: 090901 on July 08, 2014, 02:56:15 AM

It's beautiful.
Also I'm pretty sure the ramplate is there more for protection than being a wedge.

Title: Re: Scrap Daddy Design
Post by: Naryar on July 08, 2014, 09:20:27 AM

If the angled spinners lift bots well then it would not need a wedge.

Though somewhat vulnerable to single wedge, pointy bots, yes.

And it looks awesome.

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 11, 2014, 06:10:01 PM

Here's my current fleet for the AS tournament, including the previous lw.
(https://gametechmods.com/uploads/images/37487HS.png)
Powerful HS
(https://gametechmods.com/uploads/images/22531cyborg.png)
Rebuilt Cyborg with the cheaty extenders
(https://gametechmods.com/uploads/images/29195hs2.png)
Another powerful HS
(https://gametechmods.com/uploads/images/93272hs3.png)
A fast HS
(https://gametechmods.com/uploads/images/93863mite.png)
Good ol Mite
(https://gametechmods.com/uploads/images/46016poker.png)
My classic powerful poker
(https://gametechmods.com/uploads/images/10277vs.png)
Powerful VS
(https://gametechmods.com/uploads/images/14476Swordfish.png)
Swordfish will make an appearance

and finally a rebuilt Exploding Bees from when I was working on The Happy Bees
(https://gametechmods.com/uploads/images/8639explodingbees.png)

I'm working on a few more lightweights that may get in depending on the tournament. We also should finish restocked...eventually

Title: Re: Scrap Daddy Design
Post by: KOS on July 11, 2014, 06:43:57 PM

They all look great, I think you're gonna win  ;)

Title: Re: Scrap Daddy Design
Post by: Mecha on July 11, 2014, 08:06:02 PM

Some nice gems in here. :)

Title: Re: Scrap Daddy Design
Post by: Jaydee99 on August 09, 2014, 12:47:09 PM

I'm a fan of the third one. Looks like the tournament is your's to win.

Title: Re: Scrap Daddy Design
Post by: Mecha on August 09, 2014, 12:49:13 PM

If only he would have sent them. XP

Title: Re: Scrap Daddy Design
Post by: Naryar on August 09, 2014, 02:03:47 PM

>mite
>tick

i see what u did thar

Title: Re: Scrap Daddy Design
Post by: HurricaneAndrew on August 09, 2014, 02:09:20 PM

These bots were posted almost a month ago. They are nice and all, but not sure why the post was necessary.

Title: Re: Scrap Daddy Design
Post by: Naryar on August 09, 2014, 02:18:23 PM

Quote from: HurricaneAndrew on August 09, 2014, 02:09:20 PM

These bots were posted almost a month ago. They are nice and all, but not sure why the post was necessary.

it was certainly better than your post

so what if it's a bump ? this showcase and the showcase session needs more activity

Title: Re: Scrap Daddy Design
Post by: HurricaneAndrew on August 09, 2014, 02:23:33 PM

Quote from: Naryar on August 09, 2014, 02:18:23 PM

so what if it's a bump ? this showcase and the showcase session needs more activity

I guess, but they're not as relevant since the tournament they were built for has started without them.

Title: Re: Scrap Daddy Design
Post by: Naryar on August 09, 2014, 02:35:31 PM

Quote from: HurricaneAndrew on August 09, 2014, 02:23:33 PM

Quote from: Naryar on August 09, 2014, 02:18:23 PM

so what if it's a bump ? this showcase and the showcase session needs more activity

I guess, but they're not as relevant since the tournament they were built for has started without them.

and so ? they're cool and well built and some are even intredasting like that downwards poker with casters

the Exploding Bees is pretty interesting although I don't see much difference with the original bot...

Title: Re: Scrap Daddy Design
Post by: Scrap Daddy on July 22, 2015, 02:30:54 PM

Sup guys. Here's the bot I should have entered into BTTB, but managed to just finish now. I was rebuilding a razor HS and thought it was the perfect time to rebuild Leech.

I thought it over on how I could improve Leech, and decided more emphasis on wedges and armor would improve its effectiveness against other bots than spinners. I was somewhat right, 6 spinners is enough to still handle HS and the angled wedges are pretty good, but its not perfect. I think I'm going back to long single wedge and use more armor.

Since there are a few things I need to tinker for the next version, I'm not happy enough to call it Leech 2.0, but here its is, Proto-Leech:
(https://gametechmods.com/uploads/images/48258Protoleech.png)

Title: Re: Scrap Daddy Design
Post by: Badnik96 on July 22, 2015, 03:07:04 PM

dude that's the coolest stock bot ive seen in a while

Title: Re: Scrap Daddy Design
Post by: Naryar on July 22, 2015, 03:31:01 PM

Quote from: Badnik96 on July 22, 2015, 03:07:04 PM

dude that's the coolest stock bot ive seen in a while

well, it's built by scrap daddy

Title: Re: Scrap Daddy Design
Post by: Reier on July 22, 2015, 03:34:31 PM

sd enter the us vs uk tourney or i will kill you

also cool bot

Title: Re: Scrap Daddy Design
Post by: The Ounce on July 23, 2015, 03:38:38 AM

I wanted to do something similar for my entry, but since I put it off until the last few hours I had to try something different.

Even if I hadn't procrastinated, I don't think mine would've been nearly as good as yours.  Good job :thumbup

Title: Re: Scrap Daddy Design
Post by: Pwnator on July 23, 2015, 03:52:02 AM

Is it really fine for the bottom razors to reach beyond the wedges?

angled drive is also cool

Title: Re: Scrap Daddy Design
Post by: RedAce on July 23, 2015, 06:08:12 AM

That's looks sick bro.

Title: Re: Scrap Daddy Design
Post by: G.K. on July 23, 2015, 08:22:29 AM

Beautiful

Title: Re: Scrap Daddy Design
Post by: Sage on July 23, 2015, 11:29:58 PM

Very snazzy. angled stuff looks cool but never as good as straight tho.

Text Only | Text with Attachments