Text Only | Text with Attachments

gametechmods

Robot Arena => Showcases => Stock Showcases => Topic started by: pyscolone on May 18, 2008, 07:27:33 PM

Title: Pyscolone's Showcase
Post by: pyscolone on May 18, 2008, 07:27:33 PM
some sheeeet i just made, DSA and the works.

(http://img528.imageshack.us/img528/4476/33310screenshot61bg7.png) (http://imageshack.us)
Title: Pyscolone's Showcase
Post by: Sorrow on May 18, 2008, 07:30:26 PM
I like it. It wouldn't hurt to add at least a bit of a slope to the front. A thin rammer or piston would munch that thing up. If possible, moving the casters closer to the center would help, too.
Title: Pyscolone's Showcase
Post by: pyscolone on May 18, 2008, 07:44:19 PM
(http://img213.imageshack.us/img213/7149/78700414zx0.png) (http://imageshack.us)
Title: Pyscolone's Showcase
Post by: Clickbeetle on May 18, 2008, 08:28:16 PM
Actually a sloped front would probably hinder that design.  You don't want bots to slide up on top of the piston, you want them held in front and repeatedly punched.

Good bot.  I wonder if there could be a better place for the ice picks though.
Title: Pyscolone's Showcase
Post by: pyscolone on May 18, 2008, 08:38:16 PM
the ice picks help stabilize the robot, it tended to slide becuase of its speed but with them attached its much more maneuverable
Title: Pyscolone's Showcase
Post by: kill343gs on May 18, 2008, 08:47:07 PM
What if you shortened the wedge's extenders and put 20cm's on sideways and put irons across the front gap or something for protection, then put the wedges on the 20cms?
Title: Pyscolone's Showcase
Post by: pyscolone on June 02, 2008, 09:20:09 PM
(http://img139.imageshack.us/img139/8101/hightolerancetw8.png) (http://imageshack.us)
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 03, 2008, 12:05:03 AM
Wow. One of the coolest robots I've seen in quite a while. I think the 4wd is pretty sweet, and so is the caster armour bottom. My only worry about it is the fact that razors are brittle and don't have very much HP. Is that a problem at all, or does it kill too fast?
Title: Pyscolone's Showcase
Post by: Cooker on June 03, 2008, 03:18:45 AM
Pyscolone, you allways surprise me with your very original designs. I like it.
Title: Pyscolone's Showcase
Post by: Naryar on June 03, 2008, 05:35:23 AM
WTF! 917 damage with that weapon ??

Anyways I like it, bust I would put iron spikes too. Nice idea about the casters protecting the weapon motors.
Title: Pyscolone's Showcase
Post by: Madiaba on June 03, 2008, 06:26:33 AM
Pys, nice and original.  Could you show some inside pics?  Don't know it's weight..... but, what is/are the advantage(s) of the 4WD?    In case it loses a motor/wheel is one I can think of....  Whatever its advantages, I was also thinking of instead bolstering its weaponry for increased offense....
Title: Pyscolone's Showcase
Post by: kill343gs on June 03, 2008, 08:08:13 PM
I would go with irons, they hit better and have a longer reach.
Title: Pyscolone's Showcase
Post by: pyscolone on June 03, 2008, 08:42:51 PM
Irons in all honest truth wont do much more. Also switching the rubbers to shiny will save about 20 kgs, thats not enough for all irons by any means.
Title: Pyscolone's Showcase
Post by: Clickbeetle on June 07, 2008, 09:15:42 PM
Interesting design, with the spinners high up instead of as low as possible like most VS's.  How well does it work compared with a low VS?

Reminds me of Shriek 2, but with more reliable weaponry and drive.  I can imagine it must be good.  Are the drive motors mounted on servos, so you can raise and lower the chassis to adjust the weapon height?  It doesn't look like it, but it could be a cool feature.
Title: Pyscolone's Showcase
Post by: pyscolone on June 08, 2008, 11:04:36 AM
The high up HPs only downfall is that on hard rams the whole bot occasionally tips forwards, other than that it works just as a low placed VS would do. The drive is placed on a snapper atm to save weight and for more connnection points, that feature your talking about however, I may try.
Title: Pyscolone's Showcase
Post by: pyscolone on June 20, 2008, 03:36:07 PM
If anyone has any pictures of my past bots please PM me.
Title: Pyscolone's Showcase
Post by: pyscolone on June 20, 2008, 08:41:35 PM
(http://img108.imageshack.us/img108/4053/horizontalverizonak6.jpg) (http://imageshack.us)
Title: Pyscolone's Showcase
Post by: Sage on June 20, 2008, 08:47:55 PM
^^ my maces ^^
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 20, 2008, 10:25:08 PM
I'm assuming that there are two black batteries and two stacked snappers in there and it has DSA. It's a brilliant setup, but there is no way that that cam be invetible. One of the coolest looking bots none the less.
Title: Pyscolone's Showcase
Post by: infiniteinertia on June 20, 2008, 10:36:16 PM
great setup. great maces. great name. great skin. great everything!

if only you had a wider wheel base d:

A.C. has got some competition these days...will i ever be silenced >:)?
Title: Pyscolone's Showcase
Post by: Madiaba on June 20, 2008, 11:41:15 PM
Nice bot and maces.  Maybe it could be called:
"Emaciator" or "E-maciator"..
"En-maciated".
Title: Pyscolone's Showcase
Post by: Venko on June 21, 2008, 02:42:00 AM
Nice... But my bot 'Uber spin' have the same setup with this difference all 8 weapon motors are stacked in exactly one... And dont say i steal from you... My bot like this is builded before this one (maybe) :biggrin:
Title: Pyscolone's Showcase
Post by: pyscolone on June 21, 2008, 11:59:21 PM
this bot doesnt even have 8 HPs.
Title: Pyscolone's Showcase
Post by: Cooker on June 22, 2008, 12:47:54 AM
The most compact I ever saw. It should be around 700 kg, if I didn't mess up with my calculation.
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 22, 2008, 02:18:33 AM
No, it should be up around 780-790. You might have enough weight to get granny guards on to make it invertible, but you'd need 12 extra kg's that I'm not sure you have...

The thing just looks so damn cool!
Title: Pyscolone's Showcase
Post by: Venko on June 22, 2008, 02:25:08 AM
Its posible to be invertable...
You will see my bot like this in my showcase soon...
Title: Pyscolone's Showcase
Post by: pyscolone on June 22, 2008, 05:03:35 PM
Oh I know it can have Grannys, thats actually what it has now but I was too lazy to retake all the screenshots.
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 22, 2008, 07:12:07 PM
Absolutely brilliant bot then.
Title: Pyscolone's Showcase
Post by: Venko on June 22, 2008, 07:19:28 PM
I must agree...
pyscolone do you want a match b/n this and my UBER SPIN ?
Title: Pyscolone's Showcase
Post by: Naryar on June 23, 2008, 01:12:56 AM
The answer is obvious.
Title: Pyscolone's Showcase
Post by: pyscolone on July 25, 2008, 03:02:56 PM
(http://img179.imageshack.us/img179/986/ripsplashzw4.jpg) (http://imageshack.us)
Title: Pyscolone's Showcase
Post by: Barbie on July 28, 2008, 03:48:27 AM
you make me want to start building stock again.
Title: Pyscolone's Showcase
Post by: infiniteinertia on July 28, 2008, 08:44:15 AM
*amen*
Title: Pyscolone's Showcase
Post by: Venko on July 30, 2008, 09:54:13 PM
I want to see Ideal Tyrant, but where to see it?
Title: Pyscolone's Showcase
Post by: System32 on July 31, 2008, 09:56:30 AM
You too?

Jeez, Were all alone here...

*Brr*
Title: Pyscolone's Showcase
Post by: pyscolone on July 31, 2008, 10:41:47 AM
whic one do you want to see?
Title: Pyscolone's Showcase
Post by: System32 on July 31, 2008, 10:50:15 AM
Ideal Tyrant. If its better than most other spinners, We must see it!
Title: Pyscolone's Showcase
Post by: Sage on July 31, 2008, 10:55:50 AM
thers ideal tyrant 1, ideal tyrant 2. which one.
Title: Pyscolone's Showcase
Post by: System32 on July 31, 2008, 10:56:34 AM
2 for me, I'm not sure about venko's choice.
Title: Pyscolone's Showcase
Post by: pyscolone on July 31, 2008, 11:02:09 AM
Quote from: System32;11846
Ideal Tyrant. If its better than most other spinners, We must see it!

not a spinner :o

1: (http://img180.imageshack.us/img180/6164/idealtyrantfinishedol7.png) (http://imageshack.us)
2: (http://img180.imageshack.us/img180/2654/idealtyrantiijk4.png) (http://imageshack.us)
Title: Pyscolone's Showcase
Post by: System32 on July 31, 2008, 11:09:13 AM
Not a tribar spinner then. But that looks awesome. *Bows*
Title: Pyscolone's Showcase
Post by: infiniteinertia on July 31, 2008, 08:35:03 PM
yeah nub. bow.
Title: Pyscolone's Showcase
Post by: System32 on August 01, 2008, 08:24:53 AM
Inf, you are, and always will be, a pathetic troll.
Title: Pyscolone's Showcase
Post by: man manu on August 01, 2008, 09:29:51 AM
HAHA:lol: pwned
Title: Pyscolone's Showcase
Post by: man manu on August 01, 2008, 09:31:47 AM
Quote from: System32;11885
Inf, you are, and always will be, a pathetic troll.
:lol: post of the year award goes to...........


SYSTEM32
Title: Pyscolone's Showcase
Post by: pyscolone on August 01, 2008, 09:38:18 AM
get out of my thread
Title: Pyscolone's Showcase
Post by: infiniteinertia on August 01, 2008, 03:04:02 PM
nah
Title: Pyscolone's Showcase
Post by: System32 on August 01, 2008, 03:26:27 PM
Heh, I'll get the beans and the axe...

Besides, I'm really unsure about your age. 18? 16?
Title: Pyscolone's Showcase
Post by: pyscolone on August 01, 2008, 03:31:22 PM
/endflame
Title: Pyscolone's Showcase
Post by: System32 on August 01, 2008, 03:52:58 PM
Ha! You forgot to end the tag's proporly!
[/Flame]
[/Corrections]
Title: Pyscolone's Showcase
Post by: pyscolone on August 01, 2008, 03:59:00 PM
stfu...  admin clean this sh** up
Title: Pyscolone's Showcase
Post by: Gigafrost on August 01, 2008, 04:53:03 PM
System32 respect psy and inf. They are undoubtably one of the best bot builders around here...
Title: Pyscolone's Showcase
Post by: Sage on August 01, 2008, 04:59:48 PM
psy and inf are one? o.0
Title: Pyscolone's Showcase
Post by: System32 on August 01, 2008, 06:23:33 PM
I'll respect Psy but Inf Can go look for Respect somwhere else.

Now, Back on topic.
Title: Pyscolone's Showcase
Post by: Madiaba on August 01, 2008, 11:39:24 PM
Quote from: pyscolone;11924
/endflame
Nice idea,...
Title: Pyscolone's Showcase
Post by: Venko on August 03, 2008, 02:16:44 AM
Psyc. see how bad is someones to spam your showcase?
Then dont do it on others, like mine for example...
So all lets end this!
BTW Infy... About my calculations of your weird American dimensions, you must be about 1,92 m tall and weight 86 kg. Hummm... I dont know well your age but here are two possibility: you are lieing about these your dimensions or you are a very rare mutant... Let me explain why. Nowdays im 1,92 m tall and weight about 125 kg (clean musculature, no fat weight). When i was teen age (like you supose to be now...) i was about 1,8... m and something tall. Even i was not that tall like you saying for your age... And about the weight... This 86 kg on 1,92 m high means you must be "only skeleton with some skin" or you didnt calculate well in your lie how you must weight. But dont worry Infy, even for my dimensions Naryar call me troll, so forget it man... At least Naryar can call me Orc, they are taller and stronger :lol:
Title: Pyscolone's Showcase
Post by: Gigafrost on August 03, 2008, 02:43:20 PM
Dude... You just spammed his thread again.
Title: Pyscolone's Showcase
Post by: pyscolone on August 03, 2008, 05:54:55 PM
(http://img356.imageshack.us/img356/6527/iiiidkjj7.jpg) (http://imageshack.us)
Title: Pyscolone's Showcase
Post by: TorrFac on August 03, 2008, 07:19:54 PM
can i take a guess at 3 times? lol
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on August 03, 2008, 07:43:34 PM
Ideal Tyrant 3?
Title: Pyscolone's Showcase
Post by: System32 on August 04, 2008, 09:57:36 AM
Damn, Roboshark beat me to it.

Is it?
Title: Pyscolone's Showcase
Post by: Somebody on August 04, 2008, 10:11:48 AM
Thats my guess, or maybe just another in the Ideal Tyrant series.
Title: Pyscolone's Showcase
Post by: infiniteinertia on August 05, 2008, 09:33:11 AM
:P

and venko your dumb.
Title: Pyscolone's Showcase
Post by: pyscolone on August 05, 2008, 04:19:03 PM
Soo ya that was IT3 in the making. Tested it and it works fine, just by looking at it however reminded me too much of the second version. So I rebuilt it and came out as a totally new bot. rapesss yo
Title: Pyscolone's Showcase
Post by: Somebody on August 05, 2008, 05:13:50 PM
So is it Id3 now, or is it ID4?
Title: Pyscolone's Showcase
Post by: Sage on August 05, 2008, 05:17:35 PM
i was just wondering what the "D" stands for in id3 and ID4, somebody.
Title: Pyscolone's Showcase
Post by: Somebody on August 05, 2008, 05:20:58 PM
Sorry, I meant IT3 and IT4.
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on August 05, 2008, 06:19:25 PM
Sooo...

Are we ever gonna see it?
Title: Pyscolone's Showcase
Post by: pyscolone on August 05, 2008, 06:48:36 PM
oh you will, you'll just have to wait
Title: Pyscolone's Showcase
Post by: pyscolone on August 09, 2008, 04:05:43 PM
(http://img156.imageshack.us/img156/9389/bountyhunterpa7.jpg) (http://imageshack.us)
(http://img361.imageshack.us/img361/3599/bountyhuntersplashnv0.jpg) (http://imageshack.us)
Title: Pyscolone's Showcase
Post by: Scrap Daddy on August 09, 2008, 05:00:21 PM
:shock: how many razors?
Title: Pyscolone's Showcase
Post by: infiniteinertia on August 09, 2008, 05:33:37 PM
Pysc i liked the other skin better. and you turned it into a popup :P
Title: Pyscolone's Showcase
Post by: System32 on August 09, 2008, 06:18:16 PM
I lost the castor count.
Title: Pyscolone's Showcase
Post by: Clickbeetle on August 17, 2008, 09:20:07 PM
Nice bot.  Very flat.  And the lawnmower blade wheel guards are a nice touch.  It's always cool when somebody uses a seldom-used component like that effectively.
Title: Pyscolone's Showcase
Post by: Meganerdbomb on August 18, 2008, 09:02:14 AM
Now THAT is one mean pop-up!
Title: Pyscolone's Showcase
Post by: Madiaba on April 27, 2009, 01:36:23 PM
Venko, if Pys' post on your thread were out of context/spam, then I would leave yours here likewise. But, as I explained, he was only responding to your PM to him about your claims..... ad infinitum.
Title: Pyscolone's Showcase
Post by: Sage on April 27, 2009, 03:22:11 PM
awww. when i saw someone post in this showcase i got all excited. oh well.
Title: Pyscolone's Showcase
Post by: pyscolone on June 02, 2009, 09:32:59 PM
bored
 (http://img190.imageshack.us/img190/1448/igykjnkj.png) (http://img190.imageshack.us/my.php?image=igykjnkj.png)
Title: Pyscolone's Showcase
Post by: kill343gs on June 02, 2009, 10:04:05 PM
Interesting to say the least... I think it might be a little difficult to get bots on top of the razors, however.
Title: Pyscolone's Showcase
Post by: Sage on June 02, 2009, 10:11:42 PM
you didnt stack the batts? or are there three?
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 02, 2009, 10:35:02 PM
It looks like it would be underweight...
Title: Pyscolone's Showcase
Post by: DuckRA2 on June 03, 2009, 01:23:43 AM
thats a very nice bot you got there, is it completly stable or does it bounce a little with those maces?


EDIT: im guessing not because those are Reversable angle motors...
Title: Pyscolone's Showcase
Post by: Naryar on June 03, 2009, 02:13:53 AM
Doesn't the RADs have trouble spinning the discs when you have your opponent on them ?
Title: Pyscolone's Showcase
Post by: pyscolone on June 03, 2009, 10:04:20 AM
3 Blacks, its not a final version its just a proto. Its perfectly stable, very fast and as the bot glides up the first discs the speed of the bot lifts it onto all 4 discs damaging the bottom of the bot like a hot knife through butter.
Title: Pyscolone's Showcase
Post by: infiniteinertia on June 04, 2009, 02:47:26 PM
holy sheeeeeeet
Title: Pyscolone's Showcase
Post by: pyscolone on June 13, 2009, 09:06:56 PM
will show insides lata :]

(http://img13.imageshack.us/img13/4805/mwhs.png) (http://img13.imageshack.us/i/mwhs.png/)
Title: Pyscolone's Showcase
Post by: Sage on June 13, 2009, 09:22:26 PM
looks niceeeee. good job getting the hpzs the perfect height.
Title: Pyscolone's Showcase
Post by: pyscolone on June 14, 2009, 12:09:27 AM
(http://img193.imageshack.us/img193/681/militant.jpg) (http://img193.imageshack.us/i/militant.jpg/)
If you didn't know, axle enhancing motors get them up to a nice speed :]
Title: Pyscolone's Showcase
Post by: Pwnator on June 14, 2009, 12:15:14 AM
Awesome. I never knew a simple axle could enhance a motor. :D

By the way, how did you glitch the axle out?

[Edit] Wait. I think I got it. But I haven't figured out the sequence of the assembly. >.<
Title: Pyscolone's Showcase
Post by: Naryar on June 14, 2009, 01:19:31 AM
Just an axle-loaded axle, and when the axle of the axle-loaded axle is out, you put a 20cm sideways and the motors on it...

Well, respect for building original.
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 14, 2009, 01:54:43 AM
NWB-KO-ing MW makes me happy.

Plastic armour makes me sad.

Couldn't you move the axle in even closer to the battery, glitch out the axle and put the battery in?

Still very epic :D
Title: Pyscolone's Showcase
Post by: pyscolone on June 14, 2009, 12:50:46 PM
Yes I could and thats what I'm planning for the HW ;]
Title: Pyscolone's Showcase
Post by: Scrap Daddy on June 14, 2009, 12:57:22 PM
So using axles bursts enhances motors?

So many ideas...
Title: Pyscolone's Showcase
Post by: pyscolone on June 14, 2009, 02:12:27 PM
(http://img32.imageshack.us/img32/156/hwhsaxle.png) (http://img32.imageshack.us/i/hwhsaxle.png/)

**fully invertible
Title: Pyscolone's Showcase
Post by: roboman2444 on June 14, 2009, 02:47:10 PM
hw?
Title: Pyscolone's Showcase
Post by: Scrap Daddy on June 14, 2009, 03:03:20 PM
Quote from: roboman2444;44212
hw?


No it's a lightweight. What are you stupid?

Nicely done Pyc.
Title: Pyscolone's Showcase
Post by: Somebody on June 14, 2009, 04:12:48 PM
MW kinda reminds me of gears your lever

just...better

alot better


Nice bots
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 14, 2009, 05:01:25 PM
Two questions:
1) How much does it weigh?
2) How many razors + irons are there?

Other than that, :O
Title: Pyscolone's Showcase
Post by: pyscolone on June 14, 2009, 05:06:41 PM
Im changing the weaponry around because I have a loot of weight left I just need to be able to make the weapons stable because eFFing with a axle messes up the wieght distribution.

12 Irons 24 Razors
Title: Pyscolone's Showcase
Post by: Sage on June 14, 2009, 05:30:23 PM
very nice job.
Title: Pyscolone's Showcase
Post by: infiniteinertia on June 14, 2009, 08:28:31 PM
YAY:)
Title: Pyscolone's Showcase
Post by: pyscolone on June 14, 2009, 09:30:18 PM
(http://img189.imageshack.us/img189/4641/hwhsnew.png) (http://img189.imageshack.us/i/hwhsnew.png/)
799.3
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 14, 2009, 11:59:00 PM
YAY:)
Title: Pyscolone's Showcase
Post by: Naryar on June 15, 2009, 01:49:02 AM
I am guessing the 20cm's overlap...

Did you managed to get the weapon HPZ's flat against the ground ?
Title: Pyscolone's Showcase
Post by: pyscolone on June 15, 2009, 04:42:06 PM
HPs are indeed flat against the ground. Due to the HPs being attached to the axle its fully invertible, as well as the tribars almost always stay horizontal for very easy killing
Title: Pyscolone's Showcase
Post by: tourdeforce on June 16, 2009, 03:14:56 PM
Quote from: pyscolone;9905
(http://img108.imageshack.us/img108/4053/horizontalverizonak6.jpg) (http://imageshack.us)


what.............the.................****.........
i know about stacking and snapper loading and all that, but i have no idea how that is humanly possible. jesus....
Title: Pyscolone's Showcase
Post by: Sage on June 16, 2009, 03:20:26 PM
Quote from: tourdeforce;44605
what.............the.................****.........
i know about stacking and snapper loading and all that, but i have no idea how that is humanly possible. jesus....

It's actually a pretty simple setup, and not even the best because it isn't invertible. (I think it's one of the coolest looking though.)

The maces look so good on that :P.
Title: Pyscolone's Showcase
Post by: Reier on June 16, 2009, 03:22:53 PM
I only figured out how to do it last month. XP
Title: Pyscolone's Showcase
Post by: Naryar on June 16, 2009, 05:41:51 PM
Only setup i can think of involves 2 stacked snappers, the extender we see on the top is actually 2 overlapped ones and they hold the drive, and the two others are inside the batts, overlapped as well, but their side AP's point in 2 opposite directions (that is left and right) and these hold the drive motors.
Title: Pyscolone's Showcase
Post by: Sage on June 16, 2009, 06:03:16 PM
Quote from: Naryar;44708
Only setup i can think of involves 2 stacked snappers, the extender we see on the top is actually 2 overlapped ones and they hold the drive, and the two others are inside the batts, overlapped as well, but their side AP's point in 2 opposite directions (that is left and right) and these hold the drive motors.


Uh. Yeah. That's it.
Title: Pyscolone's Showcase
Post by: pyscolone on June 19, 2009, 05:20:29 PM
(http://img15.imageshack.us/img15/6319/duscofull.jpg) (http://img15.imageshack.us/i/duscofull.jpg/)
Title: Pyscolone's Showcase
Post by: Reier on June 19, 2009, 06:36:03 PM
A FS/hammer hybrid? Nice.
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on June 19, 2009, 06:57:08 PM
(https://gametechmods.com/uploads/images/60786smalluberhappy.PNG)
..
Title: Pyscolone's Showcase
Post by: pyscolone on June 19, 2009, 10:30:50 PM
3 Black batts DSA and the works
Title: Pyscolone's Showcase
Post by: Sage on June 19, 2009, 11:42:00 PM
I might switch out the two maces for 4 razors. For the weight, remove the 2 bottom castors.
Title: Pyscolone's Showcase
Post by: H@zm47 on June 20, 2009, 01:57:33 AM
wow...
<3
Title: Pyscolone's Showcase
Post by: Pwnator on June 20, 2009, 02:05:20 AM
*insert R0B0's smiley here*

Can it self-right well? :D
Title: Pyscolone's Showcase
Post by: Somebody on June 20, 2009, 06:16:23 AM
Brilliantly done.
Title: Pyscolone's Showcase
Post by: Doomkiller on June 20, 2009, 06:56:01 AM
Quote from: Somebody;45310
Brilliantly done.


agreed:-D
Title: Pyscolone's Showcase
Post by: Naryar on June 20, 2009, 07:26:39 AM
Popup hammer.

Nice touch, using face spinners to solve the problem of the inherently steep wedge you got when building a caster armored wedge, plus if the razors break it's a backup weapon.
Title: Pyscolone's Showcase
Post by: infiniteinertia on June 21, 2009, 01:40:00 PM
<3 ;D
Title: Pyscolone's Showcase
Post by: pyscolone on June 22, 2009, 11:49:07 AM
What to build next
Title: Pyscolone's Showcase
Post by: roboman2444 on June 22, 2009, 11:50:46 AM
build a flail trinity sns! (super glitch!)
Title: Pyscolone's Showcase
Post by: System32 on June 22, 2009, 11:51:54 AM
FACEPALM.

If you can't think of anything, go crazy...
Title: Pyscolone's Showcase
Post by: roboman2444 on June 22, 2009, 12:14:25 PM
hmm howsabout a flipper vs hybrid.
Title: Pyscolone's Showcase
Post by: infiniteinertia on June 22, 2009, 01:32:41 PM
how about, no. get that ****ing inspiration thread going again. I;ll post mine
Title: Pyscolone's Showcase
Post by: pyscolone on June 22, 2009, 02:27:25 PM
Noone seemed to into it lol
Title: Pyscolone's Showcase
Post by: infiniteinertia on June 22, 2009, 03:23:06 PM
do another one.
Title: Pyscolone's Showcase
Post by: pyscolone on August 05, 2009, 11:02:52 AM
(http://img171.imageshack.us/img171/3984/fullbodyspinner.jpg) (http://img171.imageshack.us/i/fullbodyspinner.jpg/)

Experimenting with the Flail SnS idea, came out to be really good; just needs a rebuild. Everything you can see except for the axle stacked into the nifty.

(http://img441.imageshack.us/img441/394/bullhead.jpg) (http://img441.imageshack.us/i/bullhead.jpg/)

This or the next bot, will rape Inf's Vanquish ;p 2 Blacks and rest is visible

(http://img212.imageshack.us/img212/3402/genericness.jpg) (http://img212.imageshack.us/i/genericness.jpg/)

The Generic.

(http://img441.imageshack.us/img441/2924/hightolerance2.png) (http://img441.imageshack.us/i/hightolerance2.png/)

Is iiight
Title: Pyscolone's Showcase
Post by: Sage on August 05, 2009, 11:05:22 AM
like the first one but dont like the square chassis, love the second one, dont care for the third, <3 the last one. how are the wedges on the last one?
Title: Pyscolone's Showcase
Post by: infiniteinertia on August 05, 2009, 11:06:22 AM
You eet teh b1g suxx0rz (:

Just wait until you see VanquishX :P
Title: Pyscolone's Showcase
Post by: Reier on August 05, 2009, 11:06:25 AM
I really like the 1st popup, cool and looks effective. Are the icepicks adding much? Could you take them off and use the weight for rubbers?
On the VS, how good are the wedges? Would it be any more protected if you took off the razors on the wedges an put more casters on the bottom?
Title: Pyscolone's Showcase
Post by: Pwnator on August 06, 2009, 04:15:58 AM
Ohohoho, moar botz for meeee to clone. XD

I think the ice picks are for maneuverability (I just based it on his poker). And I still don't get how he got the shinies exactly at the wedges' height. D:
Title: Pyscolone's Showcase
Post by: H@zm47 on August 06, 2009, 06:35:06 AM
The flail SnS looks sweet. I also like the looks of Teh Generic, very cool.
Title: Pyscolone's Showcase
Post by: R0B0SH4RK on August 06, 2009, 12:31:15 PM
I can't figure out how you mounted the drive on the S&S (might have something to do with the axle in the nifty, but I'm not sure), the first popup looks sweet, the second looks to have a better wedge, and the VS is really cool too.
Title: Pyscolone's Showcase
Post by: pyscolone on August 06, 2009, 04:12:23 PM
@Sage - The square chassis is the only kind that will keep the bot symmetrical. Whatever I do rebuild the bot, it becomes unstable no matter how perfectly center I place the components. The wedges are alright on High Tolerance II but I'm sick of Snapper II's terrible wedges.

@Reier - Icepicks are wheelguards, and also no need to add rubbers because Snapper II wedges suck either way; ground clearance won't matter much. On HT2 the razors are there to stop all bots from even getting close to my chassis.

@R0B0 - The drive is indeed attached to the axle in the middle, making only the chassis move while spinning.
Title: Pyscolone's Showcase
Post by: Reier on August 06, 2009, 06:09:18 PM
Like the NCR glitch?
Title: Pyscolone's Showcase
Post by: pyscolone on August 06, 2009, 10:36:19 PM
NCR glitch..?
Title: Pyscolone's Showcase
Post by: Somebody on August 11, 2009, 11:08:14 AM
Its an SnS glitch MikeNCR came up with. Its in his DSL Showcase... i think...
Title: Pyscolone's Showcase
Post by: infiniteinertia on August 11, 2009, 05:36:12 PM
Its not a glitch.
Title: Pyscolone's Showcase
Post by: Reier on August 11, 2009, 06:12:14 PM
What is it then...
Title: Pyscolone's Showcase
Post by: pyscolone on August 11, 2009, 06:52:45 PM
I'm confused.
Title: Pyscolone's Showcase
Post by: Trovaner on August 12, 2009, 12:15:37 AM
Just to make sure everyone's on the same page (literally), he's talking about this (https://gametechmods.com/forums/showthread.php?t=364&page=10).

I would consider it to be a glitch because the chassis spins instead of the drive motors but I wouldn't call it NCR's glitch because its been done before (Volatile Partisan being one of the more famous bots using this glitch (even if it was for a different reason) and I believe that it was used before that too).
Title: Pyscolone's Showcase
Post by: Somebody on August 12, 2009, 10:05:33 AM
https://gametechmods.com/RA2wiki/index.php?title=NCR_Glitch

It seems to kinda be a spinoff of Volatile Partisan.
Title: Pyscolone's Showcase
Post by: infiniteinertia on August 12, 2009, 02:48:36 PM
That is the dumbest wiki page.
Title: Pyscolone's Showcase
Post by: Somebody on August 12, 2009, 04:21:49 PM
Well then tell that to 65.182.246.176.
Title: Pyscolone's Showcase
Post by: 40757 on September 19, 2009, 12:43:51 AM
(http://www.happybirthdaycomments.net/myspace-comments/cat/happy-birthday/happy_birthday_presents.gif)
Title: Re: Pyscolone's Showcase
Post by: pyscolone on January 26, 2010, 01:00:09 AM
Beast from the Weasssssst    bored
(http://img205.imageshack.us/img205/3124/beastformtheweast.png) (http://img205.imageshack.us/i/beastformtheweast.png/)
Title: Re: Pyscolone's Showcase
Post by: JoeBlo on January 26, 2010, 02:37:11 AM
awesome

I could say trim the chassis but I like the way your pop up's look, there is no sense in changing it
Title: Re: Pyscolone's Showcase
Post by: Pwnator on January 26, 2010, 03:08:09 AM
Awesome popup is awesome!

Crap. Too many bots to clone. D:
Title: Re: Pyscolone's Showcase
Post by: Naryar on January 26, 2010, 05:19:01 AM
Creative popup is creative  (https://gametechmods.com/uploads/images/34625mrred.png)

Title: Re: Pyscolone's Showcase
Post by: Reier on January 26, 2010, 05:46:09 PM
How's the wedge and how well does the caster armour protect? But yeah, it is cool.
Title: Re: Pyscolone's Showcase
Post by: Scrap Daddy on January 26, 2010, 05:48:40 PM
<33

BUILD MOAR
Title: Re: Pyscolone's Showcase
Post by: Naryar on January 27, 2010, 07:29:37 AM
Agreed. You need to stand up for your Stock Popup Master title !
Title: Re: Pyscolone's Showcase
Post by: pyscolone on January 27, 2010, 08:53:30 AM
Anyone to competez
Title: Re: Pyscolone's Showcase
Post by: JoeBlo on January 27, 2010, 09:13:50 AM
40757 ?

just randomly putting others up to the challenge :P
Title: Re: Pyscolone's Showcase
Post by: Clickbeetle on January 27, 2010, 11:28:07 PM
Way to be creative with the chassis.  And yet at the same time, it's functional--you need far less casters to protect the front than if it was a traditional flat surface.  More people should do that more often.
Title: Re: Pyscolone's Showcase
Post by: DuckRA2 on January 28, 2010, 02:52:43 AM
how does it do against a HS?
Title: Re: Pyscolone's Showcase
Post by: 40757 on January 28, 2010, 03:25:41 PM
Uh, Sure I'll try I guess.
Title: Re: Pyscolone's Showcase
Post by: Sage on April 01, 2020, 10:30:12 AM
remember this guy
Title: Re: Pyscolone's Showcase
Post by: Meganerdbomb on April 01, 2020, 10:43:38 AM
Quote from: Sage on April 01, 2020, 10:30:12 AM
remember this guy
yes
Title: Re: Pyscolone's Showcase
Post by: pyscolone on April 01, 2020, 10:59:45 AM
Quote from: Meganerdbomb on April 01, 2020, 10:43:38 AM
Quote from: Sage on April 01, 2020, 10:30:12 AM
remember this guy
yes

Howdy old friends
Title: Re: Pyscolone's Showcase
Post by: Sage on April 01, 2020, 11:08:45 AM
Quote from: pyscolone on April 01, 2020, 10:59:45 AM
Quote from: Meganerdbomb on April 01, 2020, 10:43:38 AM
Quote from: Sage on April 01, 2020, 10:30:12 AM
remember this guy
yes

Howdy old friends

are you magic or do you have email notifications set up for this showcase
Title: Re: Pyscolone's Showcase
Post by: pyscolone on April 01, 2020, 11:20:03 AM
I guess so 🤷‍♂️ . I really need to get back into this as I still have my old harddrive tucked away somewhere if someone could help me out at some point.. I am not nearly as computer savvy as I used to be.
Title: Re: Pyscolone's Showcase
Post by: Sage on April 01, 2020, 11:32:31 AM
Quote from: pyscolone on April 01, 2020, 11:20:03 AM
I guess so 🤷‍♂️ . I really need to get back into this as I still have my old harddrive tucked away somewhere if someone could help me out at some point.. I am not nearly as computer savvy as I used to be.

whatever happened to the adapter you were supposed to get delivered like 2 years ago
Title: Re: Pyscolone's Showcase
Post by: pyscolone on April 01, 2020, 11:41:43 AM
I got it and tried navigating my files, but wasn't really sure what I was looking for. Found old splashes and skins but I cant recall the programs I needed to open the .bot files or even how to download the game. I'm an old wrinkly man now who cant figure out the interwebs. If someone could point me in the right direction maybe tonight I'll D/L the game.

Edit: Anyone can email me as I forget to check the forums... clearly. Will have me checking the site more often
Title: Re: Pyscolone's Showcase
Post by: Sage on April 01, 2020, 11:59:37 AM
Quote from: pyscolone on April 01, 2020, 11:41:43 AM
I got it and tried navigating my files, but wasn't really sure what I was looking for. Found old splashes and skins but I cant recall the programs I needed to open the .bot files or even how to download the game. I'm an old wrinkly man now who cant figure out the interwebs. If someone could point me in the right direction maybe tonight I'll D/L the game.

Edit: Anyone can email me as I forget to check the forums... clearly. Will have me checking the site more often

You can download it here: https://gametechmods.com/forums/downloads/?sa=downfile&id=4 (https://gametechmods.com/forums/downloads/?sa=downfile&id=4)
Title: Re: Pyscolone's Showcase
Post by: pyscolone on April 01, 2020, 12:20:19 PM
Is WinRAR still free with that bogus free trial glitch? At work so won't be able to do anything until I get home
Title: Re: Pyscolone's Showcase
Post by: Sage on April 01, 2020, 12:49:44 PM
Quote from: pyscolone on April 01, 2020, 12:20:19 PM
Is WinRAR still free with that bogus free trial glitch? At work so won't be able to do anything until I get home

yep lol
Title: Re: Pyscolone's Showcase
Post by: Meganerdbomb on April 02, 2020, 08:32:06 AM
Wow, Sage, you really are a wizard. You're bringing people back from the dead now.
Title: Re: Pyscolone's Showcase
Post by: pyscolone on April 02, 2020, 05:53:33 PM
1st hard drive down, found some archived tourny pics/compilations and Luigicas/eFFe/inF splashes. also found some of his .bot files...No luck for any of my stuff so far. What do you guys use to share images now? Look like most of my stuff disappeared online
Title: Re: Pyscolone's Showcase
Post by: pyscolone on April 02, 2020, 07:48:40 PM
Some pics I've found
Title: Re: Pyscolone's Showcase
Post by: pyscolone on April 02, 2020, 07:51:04 PM
2

Title: Re: Pyscolone's Showcase
Post by: pyscolone on April 02, 2020, 07:54:42 PM
3

Title: Re: Pyscolone's Showcase
Post by: Meganerdbomb on April 02, 2020, 09:04:20 PM
Quote from: pyscolone on April 02, 2020, 05:53:33 PM
1st hard drive down, found some archived tourny pics/compilations and Luigicas/eFFe/inF splashes. also found some of his .bot files...No luck for any of my stuff so far. What do you guys use to share images now? Look like most of my stuff disappeared online
yeah man I lost a ton of stuff when upurs finally went down a few  years back.  I think most places,  including here have their own image sharing feature now though. Otherwise, imgur still exists.
Title: Re: Pyscolone's Showcase
Post by: Pwnator on April 03, 2020, 09:12:45 AM
Alright I fixed the attachments and placed them in spoiler tags. Should be easier to view them now.
Title: Re: Pyscolone's Showcase
Post by: Meganerdbomb on April 03, 2020, 04:32:52 PM
Man some of these are really oldschool. Those popup designs look quaint now.
Title: Re: Pyscolone's Showcase
Post by: Virus Bomb on April 03, 2020, 05:35:21 PM
here's some more pics of your bots (https://imgur.com/a/bwLXWwi)
Title: Re: Pyscolone's Showcase
Post by: Sage on April 06, 2020, 09:16:23 PM
dusco was ahead of its time. pysc always had the cleanest looking bots.
Text Only | Text with Attachments