gametechmods
Robot Arena => Showcases => Stock Showcases => Topic started by: playzooki on April 04, 2014, 11:15:12 AM
-
(https://gametechmods.com/uploads/images/87353screenshot_2.png)
kek
DSA
5 razors
it sucks
can beat emergency
havent installed any ai packs.
CD2
HTML5
-
I would advise flipping the tribar, and attaching the 2 extenders like this : tribar-= It will give it better reach.
^extenders
You could also try attaching the HPZ to a snapper (or anchor), and shinking the chassis to save weight for an extra razor. ;)
-
i forgot to say that i built a kek 2 but it sucked. it was underpowered,the drive wasnt as good, the turning sucked, and the spinners spun slowly.
(https://gametechmods.com/uploads/images/67570screenshot_4.png)
kek 3
DSA
3 razors
3 maces
can beat kek 1 in 37 seconds.
also which ai pack should i install? i can ai myself.
-
If you can AI, try and make a personal AI pack for yourself to practice with, and gradually upgrade the AI bots as you get better.
-
If you can AI, try and make a personal AI pack for yourself to practice with, and gradually upgrade the AI bots as you get better.
i ai'd all my stock bots built in 2014 :dumb)
i lost all of my old bots from 2011 when my laptop died, and i couldnt install mods or ai back then :dumb)
-
i am starting to think you are building poorly on purpose...
-
i am starting to think you are building poorly on purpose...
bear in mind i suck at 99% of games
-
ok now i have fully understood kos_flow's diagram
kek 3.5
(https://gametechmods.com/uploads/images/53159screenshot_11.png)
6 razors
100% more weapon actually do stuff
can beat kek 3 by KO in 2:02
CD2
HTML5
-
That bot really isn't bad for someone who "suck(s) at 99% of games" If you had a nifty instead of a black, and had 6 eFFe'd maced on, it would be a good robot.
BTW, you'll end up looking back on your old bots and cringing if you name them after "fhanny interbutts meems" like that. I know that from personal experience.
-
My First LW (needs a better name, suggestions?)
has the exact same ai problems as 29 minuted to HELL, but without the loading
(https://gametechmods.com/uploads/images/2491screenshot_14.png)
thanks as
probably wont build anymore today, will go soon
-
I'd try making the chassis smaller and then stacking the baseplate anchors (which isn't too hard when it comes to BAs so just try it out) and then mount the drive off that.
-
BTW... you'll end up looking back on your old bots and cringing if you name them after funny intebuttzz maymays like that. I know that from personal experience.
yO_Ou sO_Ound very experienced in the matter
-
I'd try making the chassis smaller and then stacking the baseplate anchors (which isn't too hard when it comes to BAs so just try it out) and then mount the drive off that.
What, so having everything externally exposed? (kinda like some robots in dsl)
If so, ill try it tomorrow.
-
I'd go RADs, shrink the chassis and try to get a plow on. Dunno if you'd get enough weight though, I'm out of stock practice.
-
(https://gametechmods.com/uploads/images/15766screenshot_20.png)
9 razors
rad drive
shinys
can beat kek 3.5
can beat My First LW v1
DSA
rads give it turning problems
(check them dubs)
-
it's OK, bit of empty space though
-
Try mounting the motors inside the chassis, saving you the extender weight.
-
actually what would save weight is getting a mouse and stacking the bas would save more, ill do that tonight
-
(https://gametechmods.com/uploads/images/12472Robot%20Arena%202%202014-04-05%2021-59-26-444.jpg)
3 razors, 3 maces and 3 bear claws
2 rads
1 nifty
bit of empty space, cba to get rid of it today, not too much
can beat tempus fugit (starcore4alpha2)when im driving, havent ai'd yet
-
better view
(https://gametechmods.com/uploads/images/7304Robot%20Arena%202%202014-04-06%2014-01-22-075.jpg)
-
You should crop your images.
The bot, however, isn't bad. I would put the weapon motor inside the chassis, though.
-
I would put the weapon motor inside the chassis, though.
it was originally like that, but i put on the outside to save weight :)
-
(https://gametechmods.com/uploads/images/78241Robot Arena%202%202014-04-06%2019-24-15-915.jpg)
2 supervolts
some amount of razors i cant remember
has exact same ai problems as 29 minutes to hell so i cant test it
-
casters are useless
don't think you need 2 blacks as well.
too much razors, stick to maximum 4 per DDT
-
way too many razors for one ddt
-
S.A.C.R.I.F.I.C.E. 2
(https://gametechmods.com/uploads/images/12399SACRIFICE%202.jpg)
1 black
8 razors (4 per DDT)
120cm wedge, is way too fragile against hs's
hpz drive
beats some to most starcore 4 mw's, not that good against hs
-
Much better. Ideally you would want 2 blacks in there, although if you wanna go along this route you can also improve it by making the chassis wedge shallower instead.
-
Try shortening the wedge, getting rid of a few razors and adding a ramplate at the front. That might help.
-
conflicting advice what do i do????
(https://gametechmods.com/uploads/images/44343sacrifice 3.jpg)
2 blacks
6 razors
shallower chassis wedge
is decent when im driving, idk about ai
wedge is ok, cant get under rpb or nw though :(
-
You're relying on a short single-wedged bot to get under bots twice its weight? Aim a bit lower, dude. It looks good enough.
dat red extender tho
-
You're relying on a short single-wedged bot to get under bots twice its weight? Aim a bit lower, dude. It looks good enough.
dat red extender tho
I thought that was what you guys used? also the red extenders are because im using sages skin pack and it has a green mark where the ap is. Ill test it against the wedge mws tonight. or maybe earlier.
-
also the red extenders are because im using sages skin pack and it has a green mark where the ap is
ahahaha the irony, 9/10 good trolling
it looks pretty good, nothing much to improve, nearly a pysc popup
-
Yeah its kinda ironic in Sages skin pack the red extenders are better xD
-
I think I made a black one a while back and never released it... this summer i might finish up my skin pack.
-
I think I made a black one a while back and never released it... this summer i might finish up my skin pack.
Awesome! id like to see the pack fonished, but it looks great so far to me.
-
possible SSB entry, won't build many hw's as they are too time consuming for me
(https://gametechmods.com/uploads/images/2693i%20ran%20out%20of%20bot%20names.jpg)
2 black batteries
31 irons
2 picks
the t connnectors are there because the extenders wouldn't fit. :(
loves to lose in dumb ways.
-
Did you clone the tutorial rammer on the BeetleBros website? (Nothing wrong with that. Still a good build.)
Nice job stacking the blacks. Does it have DSA?
Also, you should angle the icepicks so they touch the ground (if you haven't already)
-
I did klone it, though then again thats a generic rammer anyway :dumb)
DSA
-
add a wedge or some stuff that makes you not lose horribly to the first gutripper/VS you see
-
(https://gametechmods.com/uploads/images/7566screenshot_56.png)
how do i make it good
-
(https://gametechmods.com/uploads/images/3661screenshot_57.png)
v2, cb in nifty
-
no comments? i am disappoint
-
It doesn't look bad, but I recommend trying to get the chassis as airtight as you can get it. Also, does it have DSA?
-
It doesn't look bad, but I recommend trying to get the chassis as airtight as you can get it. Also, does it have DSA?
yes it has dsa
-
boring hs
-
You need a black or else its gonna sux since 4 RADs
no comments? i am disappoint
It's a Child's Play Ripoff, what do you expect?
It doesn't look bad, but I recommend trying to get the chassis as airtight as you can get it. Also, does it have DSA?
It would be even worse then, the chassis would have even less HP then.
-
It's decent. But needs Bigvolt.
-
i cant get the weight for a supervolt.
(https://gametechmods.com/uploads/images/66309screenshot_62.png)
-
Shrink the chassis round the BA?
-
Shrink the chassis round the BA?
probably wouldnt save enough weight, and i cba to stack the black+cb again
-
make the entire chassis smaller, then move the ba right to the edge of the chassis (exostack if you can) and use 1 extender for the plow and maybe 1 extender for the weapon rads if you can.
-
you should have kept it the way it was because at this rate it's gonna become a 100% carbon copy of child's play 4.
-
you should have kept it the way it was because at this rate it's gonna become a 100% carbon copy of child's play 4.
Yeah, that.
Honestly, after you're done with this bot, I would export it as "Child's Play Clone" and then rebuild it to be original. Do something CUHRAZY and WHUACKY to be original like putting the drive on the outside of the chassis or getting rid of the plow for better drive, or using casters instead of a plow.
-
(https://gametechmods.com/uploads/images/32637screenshot_64.png)
cb in nifty
dsa
how do i robot
-
Put the anchors flush against the chassis so you'll have weight for HPZs, also shrink the chassis a bit.
But not bad. :)
-
no need for multiextenders at the back, unsure about the usefulness of the icepicks as well
smaller chassis, get some HPZ's as well, why it is so underweight
-
no need for multiextenders at the back, unsure about the usefulness of the icepicks as well
no need for multiextenders at the back
multiextenders
multiextenders
Nary what are you on
-
baseplate anchors...
IMPLYING THEY ARE NOT THE EXACT SAME THING ANYWAYS HUH
-
(https://gametechmods.com/uploads/images/2941screenshot_67.png)
>cant stack
>cant glitch
>cant build
halp
-
nipe
-
(https://gametechmods.com/uploads/images/25910screenshot_69.png)
cb in nifty, dsa
how do i build
its underweight because i couldnt fill up the weight idk
-
Not bad. I you want to use up some weight, you could snapper load the HPZ onto the Snapper Axle itself, rather than a separate extender and then you could attach some claws after.
Also, I feel you might be able to turn the RADs inward so the wheels won't be as exposed. Okay, maybe not, but that might help out with combat in general.
-
Not bad. I you want to use up some weight, you could snapper load the HPZ onto the Snapper Axle itself, rather than a separate extender and then you could attach some claws after.
Also, I feel you might be able to turn the RADs inward so the wheels won't be as exposed. Okay, maybe not, but that might help out with combat in general.
thanks, ill try the snapper loading thing. imo turning the rads inward will not work well as it will make turning slower.
-
(https://gametechmods.com/uploads/images/48495screenshot_71.png)
i did the thing
-
Good thing bro.
-
improvement was shown :thumbup
-
improvement was shown :thumbup
Good thing bro.
thanks
(https://gametechmods.com/uploads/images/54376screenshot_72.png)
dsa
cant remember if trinitys are legal in stock
-
you probably want to turn the zteks so the flat part is facing the ground, it helps traction
their legality usually depends on the tournament
-
you probably want to turn the zteks so the flat part is facing the ground, it helps traction
their legality usually depends on the tournament
the flat part is facing the ground :V
-
the part without the notch thing on it is technically thinner than the part with them, yeah just dont try the pointed part facing down with shinies
-
the part without the notch thing on it is technically thinner than the part with them, yeah just dont try the pointed part facing down with shinies
thanks, didnt know that, i thought the collision mesh for that bit was just a hexagon :V
-
it is but its a bit wider than it is tall
-
Generic, but a good build, same with the HS.
Keep it up.
-
weapon work can be lightened by 4kg by attaching every weapon to the same red extender.
you may find it worthwhile to go plastic and use hpz's. maybe longer pistons ? i think stock pistons have the same weight ?
also that outside red extender is a bit exposed. put a weapon on the extremity.
-
(https://gametechmods.com/uploads/images/77866screenshot_73.png)
plastic
-
nice job man!
-
better, although more fragile. can you put longer pistons ?
-
better, although more fragile. can you put longer pistons ?
i tried but the robot doesnt work in the arena, works fine in the test garage
download here if anyone thinks they can fix it.
https://gametechmods.com/Robot_Exchange/LW/playzooki_The%20Heart%20of%20Winter%20broken.bot (https://gametechmods.com/Robot_Exchange/LW/playzooki_The%20Heart%20of%20Winter%20broken.bot)
-
(https://gametechmods.com/uploads/images/41619screenshot_80.png)
dsa
first legit stock robot for over a year wow
-
needs a wider, flatter front. As-is, it's gonna get roflstomped by HS.
-
i made it bigger but it only has 2 razors instead of 5, is this better?
(https://gametechmods.com/uploads/images/54407screenshot_81.png)
dsa
EDIT:here's a new version
(https://gametechmods.com/uploads/images/33782screenshot_82.png)
-
Are those razors on straight? They look crooked to me.
-
Are those razors on straight? They look crooked to me.
I dunno, i rotated them the only way they would fit. they are mostly at the same angle except one is about 10 degrees different. i don't think it makes that much difference
-
you can always effe them
also might as well make the weapons centered in the bot
-
national stock building day
(https://gametechmods.com/uploads/images/99487screenshot_83.png)
it's sh** because i didn't have much time
MW, 39something, DSA
-
uneven stack lol
-
it's that time of year again
can't remember how to play ra2 so this is the best i could do, it's sh** and destroys itself quickly, though more stable than i expected.
[ This attachment cannot be displayed inline in 'Print Page' view ]
-
Put an extender before the pistons and mount the drive off that so it's more stable and your motors are less vulnerable. If you rotate them right you should be able to get invertibility with shinies as well.