Craaig has been teaching you well. :P
But with the wedge and wedge blockers there, the snowplow seems kinda pointless, tbh.Snowplough protects the bot from HS for a bit :P
And you seem to be arching your machine off the ground with your wedge angle.
Time for an amazingly inartistic splash, featuring my first attempt at the stock popup, which has an amazingly unoriginal name. Normally I hate popups, but the HS in stock were getting on my nerves, so I made a popup to try and kill them.
Grannies usually make your wedges worse. Try to get shinies or, even better, rubbers on. 4 blacks are overkill, 2 or 3 would suffice. Turn your Z-teks 90 degrees so that they flush with the floor. Also, use ramplates instead of mower blades.
(https://gametechmods.com/uploads/images/6698Splashy thingy.PNG)I like the outward razors.
(unless it's a hammer, but I don't think it will still happen). :P
(unless it's a hammer, but I don't think it will still happen). :P
Yea, what kind of a noob would build a hammer?
Well, I tried to make a triple hybrid (Side Popup, Normal popup, Undercutting HS) but I don't have the skillz yet. :P I suppose this next bot is a side popup/popup hybrid, if they can be considered different bot types :S (which would make the triple one pointless:P).That bot will make Alien Queen RIMP.SCv4 prehaps?
The empty space is there between the snappers as I had originally planned for DDT wedges and Normal popup part on DDTS. 2 Blacks.
(https://gametechmods.com/uploads/images/6698Splashy thingy.PNG)
(unless it's a hammer, but I don't think it will still happen). :P
Yea, what kind of a noob would build a hammer?
(unless it's a hammer, but I don't think it will still happen). :P
Yea, what kind of a noob would build a hammer?
I've built hammers. And VS. But they have failed rather epicly so i haven't showcased them. I'll keep working on them. :P
Hammer bots aren't that bad, its just, simple-er weapons only go so far.(unless it's a hammer, but I don't think it will still happen). :P
Yea, what kind of a noob would build a hammer?
I've built hammers. And VS. But they have failed rather epicly so i haven't showcased them. I'll keep working on them. :P
It was a joke, cause I used to make a ton of hammers :)
The middle casters are weight wasted
Spin the razors around so the flat side hits the opponent.
It's for the better if you rotate you HPZs 90 degrees so you can get rubbers.
Also, if you want more damage, add 'ears' like R4 did so the razors can gain more momentum and deal more damage. And the ears will protect your bursts as well. :D
Reskin the bear claws so the fur is green !
Reskin the bear claws so the fur is green !
This and reskin the ramplates so they look like band-aids.
10 does not equal 24.Yes, and switch the black extenders for red ones. So they fire even faster.
If he lost one razor from each snapper, that would work. And would also make them fire faster. =D
How would that make them fire faster? They both weigh exactly the same.10 does not equal 24.Yes, and switch the black extenders for red ones. So they fire even faster.
If he lost one razor from each snapper, that would work. And would also make them fire faster. =D
Red makes things go faster.How would that make them fire faster? They both weigh exactly the same.10 does not equal 24.Yes, and switch the black extenders for red ones. So they fire even faster.
If he lost one razor from each snapper, that would work. And would also make them fire faster. =D
I disagree.HPZs are faster because they are red.
Sage painted them green. =]Fine.
You get turning (x-plane) and forwards and backwards motion (y-plane) when you're driving, but there's very little roll (z-plane), which is the plane of the Snapper's rotation, so I reckon it should be more or less fine.Wouldn't that leave the front more open to other wedges/popups
I would be inclined to space the ramplates out a little more, to get some protection on the corners.
Doubt gazea would let me anyways. :P
You get turning (x-plane) and forwards and backwards motion (y-plane) when you're driving, but there's very little roll (z-plane), which is the plane of the Snapper's rotation, so I reckon it should be more or less fine.Wouldn't that leave the front more open to other wedges/popups
I would be inclined to space the ramplates out a little more, to get some protection on the corners.
TITRATIONS D:
Most random name ever... srsly ? A pH-reactive color indicator ?
Most random name ever... srsly ? A pH-reactive color indicator ?
Most random name ever... srsly ? A pH-reactive color indicator ?
Well if it's called ludicrous faillure, ofcourse it's not gonna do too well ;P
What are the swords there for?
MOAR RAZORS!!!!!!!
Loophole: Only some of the weapons need be sledges.
I think that 10 razors per burst is overkill. Maybe get some SnapperII wedges and focus on spreading the razors evenly/getting a few moar razors.Snapper II wedges are worse than DDT wedges.
Couldn't you at very least snapper load the Z-Teks to save some weight and get some more weapons on there?
When I saw the chassis shape, I thought Gazea built it. @_@
I would rotate the katanas so their end closer to the ground, and your bot might be more stable after that.
Probably one of my favourite stock popups. How are the wedges?
Whats wrong with HP Z-Teks?
LESS RAZORS
A year and a bit since my last post O:Whoa, I built a bot nearly identical to this for RIW4 :P.
Anyways, this...
(https://gametechmods.com/uploads/images/41003astockbotwhatisthis.png)
DSA. Like the first stock LW I've ever actually built. :L
With a smartzone its a MW though.. I'll ask GRW if he has the weightless smartzones :L
It's a mini Ripblade (restocked anyway) :3
geussing:
-->mw Yar
-->4wd HPZ Not quite, Normal Z-teks
-->1 ddt or snapper w/ 3-4 razors DDT, 4 razors
-->snapper2 wedge Yup
-->wedge quality is above average God knows
-->dsa Indeedy
id get rid of the casters and upgrade to dsa
and the front looks a bit..... narrow to me, maybe move the battery up between the snappers