gametechmods
Robot Arena => Showcases => Stock Showcases => Topic started by: Jammy Dodger on December 18, 2016, 10:42:47 AM
-
this going to be a mess but here have this
(https://gametechmods.com/uploads/images/3169Ze popup cafes outside.png) Its called Popup Cafe the name being a pun on a type of cafe
(https://gametechmods.com/uploads/images/68814insuies.png)
DSA, 9 razors and 3ddts
-
anything about the robot would be nice...
-
I'd say you need a DDT or green snapper wedge. Made the middle DDT the wedge and put an extra razor on each DDR, which gives you some weight for another black (stacked) maybe or rubbers
-
why square extender?
-
I'd say you need a DDT or green snapper wedge. Made the middle DDT the wedge and put an extra razor on each DDR, which gives you some weight for another black (stacked) maybe or rubbers
I'll try :)
why square extender?
in stock 1.4 theres the 140 cm square extender and it weighs 5 kilos
-
why square extender?
The 104cm extender was made hidden during development. It was developed before they gave the square extenders different weights and so it only weighs 5kg.
-
why square extender?
The 104cm extender was made hidden during development. It was developed before they gave the square extenders different weights and so it only weighs 5kg.
Thank you for clearing things up dreamcast :)
-
Doesn't look bad at all, but 3 DDTs should have a black and Nifty at the bare minimum. If you want to beat HS I would also make the wedge much shallower and wider.
-
I've done some fiddling with PC so it has 2 batts (red and a black) and now has ten razors with a the middle ddt being the the wedge but now it weighs 403 :|
-
I've done some fiddling with PC so it has 2 batts (red and a black) and now has ten razors with a the middle ddt being the the wedge but now it weighs 403 :|
Change the middle DDT to a Blue.
-
I've done some fiddling with PC so it has 2 batts (red and a black) and now has ten razors with a the middle ddt being the the wedge but now it weighs 403 :|
Change the middle DDT to a Blue.
no just no i want a good wedge
Oh and heres the pic (https://gametechmods.com/uploads/images/81241new pc.png)
-
I've done some fiddling with PC so it has 2 batts (red and a black) and now has ten razors with a the middle ddt being the the wedge but now it weighs 403 :|
Change the middle DDT to a Blue.
no just no i want a good wedge
Oh and heres the pic (https://gametechmods.com/uploads/images/81241new pc.png)
IT WILL STILL BE A WEDGE!
I think you just didn't have it in the correct place.
-
I've done some fiddling with PC so it has 2 batts (red and a black) and now has ten razors with a the middle ddt being the the wedge but now it weighs 403 :|
Change the middle DDT to a Blue.
no just no i want a good wedge
Oh and heres the pic (https://gametechmods.com/uploads/images/81241new pc.png)
Stack the supervolt, remove the nifty along with it's chassis space and get rid of one razor on each DDT.
-
I've done some fiddling with PC so it has 2 batts (red and a black) and now has ten razors with a the middle ddt being the the wedge but now it weighs 403 :|
Change the middle DDT to a Blue.
no just no i want a good wedge
Oh and heres the pic (https://gametechmods.com/uploads/images/81241new pc.png)
Stack the supervolt, remove the nifty along with it's chassis space and get rid of one razor on each DDT.
i dont know how to stack
-
Stacking batteries is easy, you literally just place one battery on top of another identical battery. Just remember it's only accepted in Stock.
-
Stacking batteries is easy, you literally just place one battery on top of another identical battery. Just remember it's only accepted in Stock.
Oh okay and i've fixed the weight it now has a green snapper wedge
-
Don't listen ti those guys use a nifty + black like you are now, its the perfect power output for a MW popup.
-
Don't listen ti those guys use a nifty + black like you are now, its the perfect power output for a MW popup.
I agree as its more powerful
-
Getting better, but the 5th razors are unnecessary because the weight causes the DDTs to slow down; 3 or 4 is optimal. Use the extra weight from that as well as narrowing the back end of the chassis by rotating the black to make the chassis wedge bigger. For the powered wedge, it's best to just experiment because it seems to depend on weight distribution rather than the type of motor; DDTs just happen to be the heaviest but they should be about equal to a SnapperII with more components shifted towards the front. I like the original setup you had, though if it doesn't work well just forget it.
-
Getting better, but the 5th razors are unnecessary because the weight causes the DDTs to slow down; 3 or 4 is optimal. Use the extra weight from that as well as narrowing the back end of the chassis by rotating the black to make the chassis wedge bigger. For the powered wedge, it's best to just experiment because it seems to depend on weight distribution rather than the type of motor; DDTs just happen to be the heaviest but they should be about equal to a SnapperII with more components shifted towards the front. I like the original setup you had, though if it doesn't work well just forget it.
Okay i'll do what you said but with the 2 batts the ddts don't even care about the 5 razors so yeah
-
I've done it
(https://gametechmods.com/uploads/images/921432.png)
It has 8 razors and RUBBERS and DSA
(https://gametechmods.com/uploads/images/52994Untitled.png)
-
You got 12kg to use now. Chuck a couple of casters on the sides or something.
-
You got 12kg to use now. Chuck a couple of casters on the sides or something.
He should shrink the rear of the chassis to get a bit more weight for a nifty, I think. 1 black is pushing it.
-
You got 12kg to use now. Chuck a couple of casters on the sides or something.
He should shrink the rear of the chassis to get a bit more weight for a nifty, I think. 1 black is pushing it.
i cant fit the nifty in even with this one so if i was to shrink the end i wont be able to put it in :|
-
You got 12kg to use now. Chuck a couple of casters on the sides or something.
He should shrink the rear of the chassis to get a bit more weight for a nifty, I think. 1 black is pushing it.
i cant fit the nifty in even with this one so if i was to shrink the end i wont be able to put it in :|
You don't need the blade on the wedge extender.
-
Okay i'll do what you said but with the 2 batts the ddts don't even care about the 5 razors so yeah
Burst motors only get stronger with battery power up to a certain point; once they reach their limit they can only handle so much weight.
New bot looks very clean, nice job. Still needs another Nifty like you had before, or if you don't think the chassis space is worth it you can get by with squeezing in one or two purple batteries (they're really easy to stack). You can get some more weight by using Shinies and removing the blade, it's not very helpful on a wedge that short. Rubber wheels can *potentially* make it wedgier, but if it's unproven in testing then they serve no purpose. Use the weight to make the wedge even shallower and wider - it really is that important in Stock. And rotate your DDTs so the razors are in the middle.
-
Okay i'll do what you said but with the 2 batts the ddts don't even care about the 5 razors so yeah
Burst motors only get stronger with battery power up to a certain point; once they reach their limit they can only handle so much weight.
New bot looks very clean, nice job. Still needs another Nifty like you had before, or if you don't think the chassis space is worth it you can get by with squeezing in one or two purple batteries (they're really easy to stack). You can get some more weight by using Shinies and removing the blade, it's not very helpful on a wedge that short. Rubber wheels can *potentially* make it wedgier, but if it's unproven in testing then they serve no purpose. Use the weight to make the wedge even shallower and wider - it really is that important in Stock. And rotate your DDTs so the razors are in the middle.
Okay i'll do that and can i have an example of a shallow wedge
-
Can i rest now? heres the new new one
(https://gametechmods.com/uploads/images/61466kaboom.png)
DSA, 2 BATTS AND 8 RAZORS
(https://gametechmods.com/uploads/images/52601bamn.png)
-
Getting there. Align your razors and use a better extender setup. Hint: Attach the 3rd extender to the first's other attach point parallel to it.
-
Getting there. Align your razors and use a better extender setup. Hint: Attach the 3rd extender to the first's other attach point parallel to it.
Do you mean put 1 one the side of a extender and keep doing that
-
Getting there. Align your razors and use a better extender setup. Hint: Attach the 3rd extender to the first's other attach point parallel to it.
Do you mean put 1 one the side of a extender and keep doing that
(https://gametechmods.com/uploads/images/82702WeaponSetup.png)
-
Getting there. Align your razors and use a better extender setup. Hint: Attach the 3rd extender to the first's other attach point parallel to it.
Do you mean put 1 one the side of a extender and keep doing that
(https://gametechmods.com/uploads/images/82702WeaponSetup.png)
Ah thanks! after this i might make a 1wd ;)
-
I couldnt do as SM said for the extender but as for the razors...
(https://gametechmods.com/uploads/images/75029WEAPON.png)
I might make a guide on how to do this
-
doesnt look bad. You have an extra 8kg (igh), use it to make the front of the bot wider.
-
doesnt look bad. You have an extra 8kg (igh), use it to make the front of the bot wider.
i'll do that
-
I couldnt do as SM said for the extender but as for the razors...
Learn how to eFFe
-
I couldnt do as SM said for the extender but as for the razors...
Learn how to eFFe
i kinda know how to do that as the razors were eFFe'ed
-
I couldnt do as SM said for the extender but as for the razors...
(https://gametechmods.com/uploads/images/75029WEAPON.png)
I might make a guide on how to do this
Yes! That looks great, you can still rotate the left DDT so it swings closer to the centre and make the weapon setup more compact, but these are just small things. Use the extra weight to make the front wider (you only have to drag the front two points to the side).
Something else to think about is the length of your burst wedge; remember that if a single-wedge popup faces a double-wedge popup head-on, whichever one's wedge(s) is longer wins. Just don't make it so long that you lose your ability to turn and face the enemy.
-
I couldnt do as SM said for the extender but as for the razors...
(https://gametechmods.com/uploads/images/75029WEAPON.png)
I might make a guide on how to do this
Yes! That looks great, you can still rotate the left DDT so it swings closer to the centre and make the weapon setup more compact, but these are just small things. Use the extra weight to make the front wider (you only have to drag the front two points to the side).
Something else to think about is the length of your burst wedge; remember that if a single-wedge popup faces a double-wedge popup head-on, whichever one's wedge(s) is longer wins. Just don't make it so long that you lose your ability to turn and face the enemy.
I'll do as you and Badger said and thank you for saying this is great! :3
-
May look rubbish now but it can beat any stock ai! (which isnt good :P)
(https://gametechmods.com/uploads/images/48218something.png)
6 razors : (
(https://gametechmods.com/uploads/images/15237coffe.png)
Up next i might make a lw spinner or any old lw
-
if you're going to to have a short single wedge, i would swap to an emergency wedge. wider stance makes it better against hs and you have a better chance against bots with narrow wedges. also, i can't remember exactly, but i think it has more hp than a than a small wedge (600 vs 400)
-
if you're going to to have a short single wedge, i would swap to an emergency wedge. wider stance makes it better against hs and you have a better chance against bots with narrow wedges. also, i can't remember exactly, but i think it has more hp than a than a small wedge (600 vs 400)
Ah okay thanks : )
-
I've been busy making this!
(https://gametechmods.com/uploads/images/92624robot lel.png)
its name is My Name is Mud based off of the same named song by Primus but im fine with any name
(https://gametechmods.com/uploads/images/88677moar razors.png)
6 razors on 2 tribars on angle motors
-
you can get rid of two of those anchors and shrink the chassis a lot. you should be able to get a black with the weight.
-
you can get rid of two of those anchors and shrink the chassis a lot. you should be able to get a black with the weight.
Okay but how im i going to fit the weapon motors in?
-
you can get rid of two of those anchors and shrink the chassis a lot. you should be able to get a black with the weight.
Okay but how im i going to fit the weapon motors in?
:facepalm:
USE A SNAPPER (preferably the blue one) (you would also want to stack 2)
-
you can get rid of two of those anchors and shrink the chassis a lot. you should be able to get a black with the weight.
Okay but how im i going to fit the weapon motors in?
:facepalm:
USE A SNAPPER (preferably the blue one) (you would also want to stack 2)
uhhhhhhhhhhhhhh i dont know how to stack tbh i only just got back into stock sooooooooooooooooooooo
-
you can get rid of two of those anchors and shrink the chassis a lot. you should be able to get a black with the weight.
Okay but how im i going to fit the weapon motors in?
:facepalm:
USE A SNAPPER (preferably the blue one) (you would also want to stack 2)
uhhhhhhhhhhhhhh i dont know how to stack tbh i only just got back into stock sooooooooooooooooooooo
there are MANY tutorials, give them a look.
-
you can get rid of two of those anchors and shrink the chassis a lot. you should be able to get a black with the weight.
Okay but how im i going to fit the weapon motors in?
look at childs plays insides/setup, thats how.
-
I made a lot of videos on how to do cool things with burst motors, check out the top of the tutorials thread
-
I made a lot of videos on how to do cool things with burst motors, check out the top of the tutorials thread
I was looking at them but got stuck when doing it on the robot :c
you can get rid of two of those anchors and shrink the chassis a lot. you should be able to get a black with the weight.
Okay but how im i going to fit the weapon motors in?
look at childs plays insides/setup, thats how.
Wheres this childs play you speak about
-
I made a lot of videos on how to do cool things with burst motors, check out the top of the tutorials thread
I was looking at them but got stuck when doing it on the robot :c
you can get rid of two of those anchors and shrink the chassis a lot. you should be able to get a black with the weight.
Okay but how im i going to fit the weapon motors in?
look at childs plays insides/setup, thats how.
Wheres this childs play you speak about
https://wiki.gametechmods.com/index.php?search=child%27s+play&title=Special%3ASearch&go=Go
if ACAMS still has (or ever had) a showcase on here, you should be able to find it somewhere in there
-
Looks decent, but with LWs you really have to maximize your chassis efficiency since it makes up a more significant part of your total weight. As we've mentioned, you should go for a black and DSA like Child's Play IV; it'll be a clone or almost one but that's just what happens when Stock's been out for 10 years and you only have 250 kg to work with. I would definitely move the drive motors back so they are right beside the battery and for the front setup there are a few ways to do it. ACAMS used just one anchor, I have one with three anchors, etc.
-
Wheres this childs play you speak about
https://wiki.gametechmods.com/index.php?search=child%27s+play&title=Special%3ASearch&go=Go
if ACAMS still has (or ever had) a showcase on here, you should be able to find it somewhere in there
It actually doesn't. There's just a few MW snapper set ups.
:facepalm:
USE A SNAPPER (preferably the blue one) (you would also want to stack 2)
2 snappers on a LW? Isn't that heavy?
-
Finally got back into stock and remade Popup Cafe its now the 3rd one :D
(https://gametechmods.com/uploads/images/25405PC3 OUTSIDE.png)
(https://gametechmods.com/uploads/images/13969outside of PC3.png)
1 supervolt, 1 DDT, 3 razors and it weighs 396.0 oh and DSA
EDIT: I know about the ramplates i'll try to fix them but dont hope for much
-
im just here so jamie won't kill himself
i like it but if you cut down on empty space you could prolly but some kind of armor on it mb?
-
What's up with the lopsided wedges?
-
What's up with the lopsided wedges?
There not lopsided its just the arena that i took the picture in :)
-
Why are the ramplates so far up, the bot looks surprised.
-
Looks pretty good. You should bring the ramplates down, attach the razors using 2 extenders only, and widen the front. And make sure the DDT starting position is well below the chassis ceiling
-
Put eyes on the front with the ramplates as eyebrows.
-
well i think stock is dead
>sees crapcan derby
NEVERMIND.
(https://gametechmods.com/uploads/images/27839up.png)
Popup Cafe is back for the millionth time
(https://gametechmods.com/uploads/images/35756pop.png)
4 razors, DSA and weighs 399.0 KG
-
Would probably benefit from removing the ramplate and using the weight to make the front wider and flatter.
-
"Warning: this topic has not been posted in for at least 180 days.
Unless you're sure you want to reply, please consider starting a new topic." welp
HERES MY LW FROM GTMCS 2 BUT JUST A BIT BETTER
(https://i.imgur.com/fnlAi5H.png)
(https://i.imgur.com/WqDgPpv.png)
it now runs on HPZ's, although it only has 2 razors now sooooo who knows, 242.2kg DSA
-
Uhh so you dropped a razor for HPZ drive? If you stack two anchors back-to-back for the drive instead of having an anchor with a T and two extenders, it'll give you weight for the third razor.