I would use a Snapper rather than a redbird as upward clamp on your second bot.
I mean just like a hammer with inverted start and end positions. Snapper starts in low position, you fire it upwards, and it clamps on the return swing.
No?
well then it must be good.
The Button: Another unbalanced VS, but it's nice. Could you use a T connector instead???
That would make it overweight and have a shorter weapon reach.
Not on an RAD.
Well why the heck would you want it on a RAD when you can use a Redbird??
More weapons?
Kill the spike, there are much more durable things you could put up there for the same weight.
You could probably change the pole spike on the second for something slightly more useful/better? No idea to be honest, dunno the weights of things in Stock.
yep that's a servo :P just part of an experiment I'm conducting, due to lack of battery available for AW's i figure that a servo might be better for longer fights then a RAD would.That's actually some good thinking. The RADs are so underpowered anyway, the servo probably spins just as fast.
Unfortunately, although servos don't REQUIRE batteries, they still drain battery if you have them.
Awesome. Inf could learn something from you about hosting an AW tourney...
(https://gametechmods.com/uploads/images/76190jawssagerobo.jpg)
screenshot please?
Try Dementia.
Too bad your not doing BW's... you'd have more weight to work with...
Lil Dog XD
Mini's you should make:
Seism 13, NWB, SFTW, Maelstrom, PTEBTD, Wide Load, and any others you can think of
(https://gametechmods.com/forums/../uploads/images/54807H.A.N.N.A.H%20Returns.jpg)
Mini's you should make:
Seism 13, NWB, SFTW, Maelstrom, PTEBTD, Wide Load, and any others you can think of
another new LW:
(https://gametechmods.com/uploads/images/64806Bad Attitude.jpg)
DSA, no idea what to do with the extra weight.
they are fun :) i just think some other members what like to see me build some new LW's. If you want Badnik i can send you the Bot file and paint template I use (the paint template tells you what's the front, top, sides and such.)
some of the mini's I built are planned to be Robo Zone 2 prizes :P
is PoI the first 360 degree side hammer? (i know bisector has a 360 degree front/back style hammer.)
Nice designsQFT
Why not just have defense and offense at the same time?
basically, was trying to work on a juggler design-Not to seem all negative or anything, but how exactly would an AW juggler work?
basically, was trying to work on a juggler design-Not to seem all negative or anything, but how exactly would an AW juggler work?
Then not a juggler...
How is anything other than a spike ball mode spinner (if spikeball mode even happens on AW class) is going to get on top of that bot ?
still trying to figure-Ian, that might take you a while.
wear can i find it?
wear can i find it?
https://gametechmods.com/forums/index.php/topic,4475.0.html (https://gametechmods.com/forums/index.php/topic,4475.0.html)
Mini-DEADBEAT is just "Dead" O,o
(No really, half its name got cut off)
@Ian: Would it be possible to make a mini version of ALARM?
Or would pneumatics just be too much?
Mini DEADBEAT? Insides please. o_O
so it Doesn't have burst motor? lol. :PMini-DEADBEAT is just "Dead" O,o
(No really, half its name got cut off)
@Ian: Would it be possible to make a mini version of ALARM?
Or would pneumatics just be too much?
"Beat" is on the other side just like the original :P
Pneumatics are too much for that chassis, i have tried a couple of times but could be possible.Mini DEADBEAT? Insides please. o_O
It's just the round extender coming from an angled baselate anchor :)
We need a mini burst motor, piston, HPZ, and control board. :laughingMEGA ADAPTER TO THE RESCUE!
yep, plus there would only really be enough weight for 1 razor or 1 iron if you made an aw with a snapper mounted inside.
Can it still be called a juggler if the weapons aren't powered?
I'm not convinced it will be effective, but it's a cool idea worth trying.
an axle drum with a plow on a LW that has HP Z-teks lol just when you think stock is dead a possible new trend is born xDExplain.
because antweights and lightweights are hardly ever complex lol.AW and LWs are fairly straight forward to make, just, they can be a pain to build due to their smaller size.
an axle drum with a plow on a LW that has HP Z-teks lol just when you think stock is dead a possible new trend is born xDExplain.
Not doubting you or anything, but what's the point of using axles?
Use the axle, and then move about the arena. The weapon will gradually start spinning on its own.Not doubting you or anything, but what's the point of using axles?
He has said, if you read posts.
Use the axle, and then move about the arena. The weapon will gradually start spinning on its own.
(tl;dr version?)
I guess the thing I'm wondering is whether the random rotation of the axle makes it any better than just making a rammer. Does it increase damage that much?
no comments? :O if anyone is wondering how it works as a popup it's simple really... bot drives onto the wedge and puts pressure on it pushing it down and pushing the spike up as the robot goes up the chassis part of the wedge. this is also one of the most unique AW's I've seen, after one "popup attack" it turns into a rammer and the wedge turns into rear defense.
It can go from popup to rammer multiple times during a match, oh yeah the wedge can also provide defense to the bottom of the robot during the match too.
Call me a nub, but what are those small , axle like things, are they motors?No, they're axles.
How would it be capable of an uppercut without at least 3 burst motors, each one covering different dimensions?
Also, have you used an axle on that mini billy goat gruff, or just an axle?
@Flipper been done times before, but I still like it. It's like a Stock Oak Stake
Can the razor actually reach things infront of it o_O
(I dunno', I just think it might be a litte short)
lol26Can the razor actually reach things infront of it o_O
(I dunno', I just think it might be a litte short)
(https://gametechmods.com/uploads/images/86337AW weapon reach.jpg)
yep it can reach :)
No, because his is better,
he uses 2 wheels whilst you use 1.
You just don't give up, do ya?
Because his doesnt take longer to move from one side to the other.
Because he has a better chance of facing the opponent whilst being hit, the vilnerable parts of his bot is only vulnerable parts are only its bottom wulst yours are its back, its side and its bottom.
The bot will be good up unil it meets an actual HS or drill or whatever.
I tried an axle HS before, the result is that they all apart in seconds because there is no "pushing".
HS vs HS fights are decided by the HS weapon speed, not for damage, but for the hits. The slower HS will always take a knock to the extender and do less damage because all the speed it from the powered HS and thus less. As such, the weapons fall off easily.
Rammers though, it's an alright idea.
do the irons roll into the back often ?
https://gametechmods.com/forums/index.php/topic,7468.0.html (https://gametechmods.com/forums/index.php/topic,7468.0.html)all in botlab :3
basically an extremely op glitch that lets you stack almost anything in anything, and is mainly "cheating", where ever people decided to draw the line at
(https://gametechmods.com/uploads/images/8756AW - DHSIron.jpg)you never cease to amaze me.
another possible first for an AW :) required some chassis reduction work and axle loading for the weapons. Control board is stacked in the pink under the motors.
dat chassis
stop the addiction man it's unhealthy
Digging the drill, though (pun totally intended).
(https://gametechmods.com/uploads/images/88453Hax.png)
(https://gametechmods.com/uploads/images/90684Mini%20-%20RPB%20DSA.jpg)
Mini - RPB Now with DSA :)
robozone 2?
You're very productive today.
For an antweight, it looks very cool, although I question how damaging it is. Any good?
Son you better DL DSL.plus your dsl aws would be good to replace the sh** thats currently in nar ai
Way more accomadating to your tastes in weightclass.
I used to have some decent DSL AW's, pretty sure I lost them all along with all my old stock robots.Son you better DL DSL.plus your dsl aws would be good to replace the sh** thats currently in nar ai
Way more accomadating to your tastes in weightclass.
and for the gauntlet were facing all 3 aw's all in a row as one match or each in its separate match so all of our weapons reset if they get knocked off each time ?
Generic, but wanted to build a new chained HS since I lost my old ones:Are you using the 160 CM? Also, is it bursted?
(https://gametechmods.com/uploads/images/81760New%20LW.jpg)
Generic, but wanted to build a new chained HS since I lost my old ones:Are you using the 160 CM? Also, is it bursted?
(https://gametechmods.com/uploads/images/81760New%20LW.jpg)
Generic, but wanted to build a new chained HS since I lost my old ones:how do you attach that HPZ up in the air with nothing supports it?
(https://gametechmods.com/uploads/images/81760New LW.jpg)
how do you attach that HPZ up in the air with nothing supports it?
(btw you can just try the tankcat style chaining to try make the bot invertible)
(i'll obviously get repped down again).
(https://gametechmods.com/uploads/images/79965Fate 2 and Fate 3.jpg)i like the left one better, mainly because the wedge on the right one is useless.
Perhaps a little less generic now :)
(https://gametechmods.com/uploads/images/79965Fate 2 and Fate 3.jpg)i like the left one better, mainly because the wedge on the right one is useless.
Perhaps a little less generic now :)
btw, with only 2 Irons, that bot is going to get deweaponed by the next HS/VS/FS it meets, and you can shorten the extender used to hold the 1st motor by about 20cm, to make it more undercutty and give it more chance against spinners.
Chained VS:
(https://gametechmods.com/uploads/images/82466Fate 7.jpg)
I find them far more interesting than your ant cause in LW you have the weight to be truly original.
What Scrap said though, there's quite a bit of unnecessary extender work.
I find them far more interesting than your ant cause in LW you have the weight to be truly original.
What Scrap said though, there's quite a bit of unnecessary extender work.
please explain?
I find them far more interesting than your ant cause in LW you have the weight to be truly original.
What Scrap said though, there's quite a bit of unnecessary extender work.
please explain?
What Scrap and I meant is that you can find better setups that use less extenders, and consequently save weight, for both of these bots.
(https://gametechmods.com/uploads/images/46927New LW.jpg)hmmmmm...... what's the bot type?
1 Nifty, plastic.
Why you need to ask for that? It's clearly angled HS.(https://gametechmods.com/uploads/images/46927New LW.jpg)hmmmmm...... what's the bot type?
1 Nifty, plastic.
I wonder why people don't use extenders instead of tribars/discs... I'll probably never use them again lol (except on chained spinners because of rule of 7).
(https://gametechmods.com/uploads/images/62024project disc.jpg)
Thoughts? are the extenders to fragile to use like this? is the worth using fragile extenders for the extra 7kgs? will this setup be less, equal or more damaging?
(https://gametechmods.com/uploads/images/62024project disc.jpg)
Thoughts? are the extenders to fragile to use like this? is the worth using fragile extenders for the extra 7kgs? will this setup be less, equal or more damaging?
I really like the idea of putting interchangeable weapons on a bot, it should be done more often IMO.
-Can't change my entry! -.-feels
-Can't change my entry! -.-feels
also was the rammer you beat my entry...........
I like free hugs, could probably do with a better skin tho.Can you guess what it is? and yeah a lot of my bots need pretty skins :P I just work with what I have available at the time mostly.
Can Opener 2 looks damn cool.It's one of my strongest antweights still despite being one of the older ones. could use a nicer skin... in fact that gave me an idea to reviving a certain old, lost topic.
Hmm was it supposed to be styled after another robot by chance?I like free hugs, could probably do with a better skin tho.Can you guess what it is? and yeah a lot of my bots need pretty skins :P I just work with what I have available at the time mostly.
Nope, it's a dual axle HS with irons :)Hmm was it supposed to be styled after another robot by chance?I like free hugs, could probably do with a better skin tho.Can you guess what it is? and yeah a lot of my bots need pretty skins :P I just work with what I have available at the time mostly.
Nope, it's a dual axle HS with irons :)Hmm was it supposed to be styled after another robot by chance?I like free hugs, could probably do with a better skin tho.Can you guess what it is? and yeah a lot of my bots need pretty skins :P I just work with what I have available at the time mostly.
Heey didn't you put up a download for your AW chassis somewhere a while back?botechange
why dont you just combine this and stock minis to make "ultimate stock aw" ai ?That would be so awesome.
why dont you just combine this and stock minis to make "ultimate stock aw" ai ?Perhaps I will, I haven't started AI'ing these bots yet so it would be easy to add them to a copy of stock mini's and work from there. Maybe we could combine them with Robo Zone 2 AI too? and Starcore AW's?
Throwing Stars seems interesting. Hows it test anyway?It actually does decent damage as a rammer(IIRC), it's meant to grind away on chassis' like a saw.
why dont you just combine this and stock minis to make "ultimate stock aw" ai ?That would be so awesome.
Do you think you could put together the most IRL/realistic ones into a pack of say 13-20 bots? Would be awesome to have and AW AI expansion for DSL. I can see why AW's are so addictive to build too.However, he would have to rebuild them since stock extenders and weapons are very weak compared to DSL extenders and weapons.
i know its meant for originality and all
i dont really see much point in chaining it. i know its meant for originality and all but trading out the second motor for 3 more irons would probably be more beneficial.I think it helps with knockback(if chained VS gets bots more airtime I see this being the case for HS) and gets more damage out of each iron. Perhaps I will do an AI test tonight and post results.
(https://gametechmods.com/uploads/images/57469AW - Bravo.jpg)Nice
i really like this concept, would it be possible to get 2 pinks in there, or does it kill too fast to need it?
i really like this concept, would it be possible to get 2 pinks in there, or does it kill too fast to need it?
Kills stuff fine as long as the weapon stays on, axle will keep drilling away throughout a 2 minute match and should do the same for 3 minute matches.
Also....
(https://gametechmods.com/uploads/images/50556Downward Spiral 3.jpg)
>.>
so it's a hs... on flails ?Nope, Axle loaded AW HS.
Wait, what's the point of these if you win all of them?? Why are you even running the contest?
That AW chassis looks much better than the 3 in the BotExchange.
Lol, didn't they just KO in one hit the bot on the most right on the bottom?
I can try to stack for You a second pink in your famous chassis, if You send me your last version.
Other bots are OK, waiting for your PM...
I see a distinct lack of BW's and it annoys me.Sorry Ianh, but fair points. Try to blow away our minds with some very cool and innovative Nifty powered AW, I dare You.
I also see a distinct lack of Nifty powered antweights, which annoys me slightly less, but still anooys me.
I dare you to make an atom weight (50kgs or less) :mrgreen:in order to make a 50kg robot with 1WD shiny + RAD, a single razor tip and 1 pink battery, you would have to have a chassis that weighs -1kg.
I dare you to make an atom weight (50kgs or less) :mrgreen:in order to make a 50kg robot with 1WD shiny + RAD, a single razor tip and 1 pink battery, you would have to have a chassis that weighs -1kg.
probably wouldnt work.
6kg seems like it would be the bare minimum for anything to be make, but im a bit doubtful
am i the only one that thinks that weapon setup looks really cool?Nope :dumb).
am i the only one that thinks that weapon setup looks really cool?
I'm not sure, that this glitch is new, also, we all know, that the pistons can fire without tanks, and the motors can spin without batteries. Basically, a "troll physics" game :dumb)It is new to my knowledge, I know trinity spinners don't need them but I don't recall any pokers not having air tanks and working before Rob's ARBBC BW.
do the pistons have any force behind them?Well Rob's BW beat VB's BW with this type of poker so I would say so.
...but I've never heard of spin motors without them...If you tap fast the "spin" key, and they must not have anything on the axles, so it's pretty useless, not worth an attention.
the Redbird spinner on the first one = bad idea
I do believe venko means that they have too much weapon weight on them.*Venko shakes Naryar's hand* :beer: Good stock knowledge!
I think the bear spinners need to have longer reach to be effective.What i was thinking.
I like it, it looks very original for a lightweight. I think the bear spinners need to have longer reach to be effective.
Is it for Maximum Overkill?