gametechmods

Robot Arena => Showcases => Stock Showcases => Topic started by: Hard Bot on February 04, 2011, 08:16:04 PM

Title: Hard Bot's Stock Showcase
Post by: Hard Bot on February 04, 2011, 08:16:04 PM
 This is Kill. It has 2 pink(https://gametechmods.com/uploads/images/9150screenshot_17.JPG)s and 1 supervolt. (https://gametechmods.com/uploads/images/10877screenshot_16.JPG)
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on February 04, 2011, 08:20:15 PM
- Don't use pinks.
- Make the motor less exposed (servo loading?).
- Minimize chassis space.
- GIVE IT A PAINT JOB, FOR GOD'S SAKE!
- It needs a wedge.
Title: Re: Hard Bot's Stock Showcase
Post by: J on February 04, 2011, 09:24:12 PM
- Don't use pinks.
- Make the motor less exposed (servo loading?).
- Minimize chassis space.
- GIVE IT A PAINT JOB, FOR GOD'S SAKE!
- It needs a wedge.
Add to it, battle a stronger opponent.
I almost always battle every robot I test agenst EMEMERGENCY
Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on February 04, 2011, 09:28:46 PM
- Don't use pinks.
- Make the motor less exposed (servo loading?).
- Minimize chassis space.
- GIVE IT A PAINT JOB, FOR GOD'S SAKE!
- It needs a wedge.
It's called Snapper loading.
Also, it DOESN'T need a wedge.
Insides would be nice.
Title: Re: Hard Bot's Stock Showcase
Post by: Scorpion on February 05, 2011, 04:52:50 AM
Yes, we need weight aand inside pics
Straight away though, I can tell you the setup of the weapon is very bad, I suggest you look into snapper loading.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on February 05, 2011, 11:18:16 AM
(https://gametechmods.com/uploads/images/24696screenshot_19.JPG) This is Kill III's inside.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on February 05, 2011, 11:28:42 AM
- Don't use that kind of weapon. HS or VS, you choose.
- C'mon, you can crop better than that!
- You only need a Nifty.
- Shrink chassis.
- NEVER use static wedges.
- If you use a wedge, make it stick out farther than the weapon.
- Don't use discs, use tribars instead.
Title: Re: Hard Bot's Stock Showcase
Post by: R1885 on February 05, 2011, 11:32:53 AM
First off, you really need to work on your cropping skills.
Second, its not bad, but it could be better. You could rotate the extenders on the spinners 90 degrees so they would line up with the the razors already on the disc. You could also downgrade to a nifty, and stack the control board into it.
Title: Re: Hard Bot's Stock Showcase
Post by: Jack Daniels on February 05, 2011, 11:51:49 AM
Hahah. You are all so critical.  XD

I am going to point out some of the things you are doing right.

-It looks like you are making an effort to keep the chassis small-ish. Keep it up, try to seal things up in there to avoid wasted space as much as possible.  The less weight you use on your chassis, the more you have available for weapons.

-You are focusing on using Shiny Wheels. Good job. Those are very efficient for smaller bots.

-You are using an HPZ tek which is a powerful motor choice to work with.

-Wedge is cool... stick it out further so that it wedges the opponent before the weapon though.

-Low chassis height is good, looks like you still have some mobility if your bot gets flipped.

Great starter effort! You have a lot of potential.  Try not to take the critics too seriously, but strive to improve.  You got some of the basics pretty good.   :D
Title: Re: Hard Bot's Stock Showcase
Post by: martymidget on February 05, 2011, 12:17:00 PM
If thats a lightweight HS you dont really need a wedge :D

A tribar is probably better for a HS design, but if you want a face spinner you want a disc and the front attachment points, but then you will need a wedge.

-prepares to be shot by the pros- :P
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on February 10, 2011, 09:34:14 PM
(https://gametechmods.com/uploads/images/22067screenshot_16.JPG)  Kill IIII is so strong that it can beat Child's Play IIIII.
Title: Re: Hard Bot's Stock Showcase
Post by: J on February 10, 2011, 10:03:54 PM
Kill IIII is so strong that it can beat Child's Play IIIII.
I dun(sparce) see the weight on it.
Title: Re: Hard Bot's Stock Showcase
Post by: SteveM4 on February 11, 2011, 01:32:15 AM
Bad cropping is bad
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on February 11, 2011, 07:00:38 AM
- Shrink chassis
- Only need a Nifty


Other than that, it's pretty good. :D

BTW, If you want to crop the best, open the picture with Paint and select the Select tool (looks like a box) in the upper right. Make a box around the part of the picture you want and press Ctrl+C (or Edit tab+Copy). Then, go to the Image tab and select, "Clear Image". Once the Image is clear, go to the Image tab again and click on, "Attributes". Make the attributes 1 by 1 (in pixels). Then clear out of JUST THE ATTRIBUTES WINDOW (not Paint itself) and press Ctrl+V (or Edit tab+Paste). And that's your cropping tutorial (or at least how I do it :mrgreen:).
Title: Re: Hard Bot's Stock Showcase
Post by: ty4er on February 11, 2011, 09:42:33 AM
OR you can do it my way  :approve:
Go edit the picture in paint and use the little box tool (selction tool) near the top right of the bar and put a box around the bit you want.
then put it in the top left corner and click outside of the picture (the grey area) and in the bottom right corner is a little square.
Click on it and drag it to the bottom right corner of the bit you want to use.
Sounds confusing but you'll get it eventually  :mrgreen:
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on February 11, 2011, 10:20:45 AM
I used to do that, I just feel my way is easier to learn and master.  ;)
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on February 25, 2011, 06:49:34 PM
(https://gametechmods.com/uploads/images/86837screenshot_17.JPG)

Here's Kill 4 KOing FIXXXER.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on February 25, 2011, 06:55:57 PM
It's IV, not IIII. :P
Title: Re: Hard Bot's Stock Showcase
Post by: Stagfish on February 25, 2011, 08:42:58 PM
FIXXER is an old and outdated bot.
Title: Re: Hard Bot's Stock Showcase
Post by: Clickbeetle on February 26, 2011, 10:40:02 PM
Which has always been weak to HS's in any case (see FIXXXER vs. Flail).


That said, Kill IV is not a bad bot.  A bit overkill on batteries, but that's really the only thing to possibly complain about.  3 irons + 6 razors is quite good weaponry for a LW.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 07, 2011, 09:57:04 PM
(https://gametechmods.com/uploads/images/53556screenshot_22.JPG) Kill 5 is destroying Tempus Fugit 2007.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on April 08, 2011, 06:23:43 AM
Getting better, I think. Try Snapper Loading the weapon motor to get some extra speed from it. And with this design you do only need a Nifty Battery. Irons are good if you need extra reach, but I don't think you do, so I'd use maces here. The collision mesh helps to protect the vulnerable extenders a little from an opponent's weapons.

On the subject of cropping, if you just use the Select Ractangle tool to select the part that you want, and then press Ctrl+Shift+X to crop the image to your selection. It's a lot quicker and easier than selecting and moving it about.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 18, 2011, 08:34:22 PM
(https://gametechmods.com/uploads/images/16348screenshot_1.JPG) Here is Bug Bite.(https://gametechmods.com/uploads/images/98955screenshot_4.JPG) Here he is beating up Berzerker. He is my AW Faceoff bot.
Title: Re: Hard Bot's Stock Showcase
Post by: Fracture on April 18, 2011, 09:01:36 PM
One pink and DSA or two pinks and Plastic? (or just one pink and Plastic? I don't even know :P)

The middle extender seems exposed. You might want to consider attaching your razors like so:

(https://gametechmods.com/uploads/images/67087AW.jpg)

(the razors seem too high because I accidentally raised the baseplate anchor :P)

...to protect the extenders better and to sneak in between other people's weapon racks which have been arranged like yours. I understand the wide weapon range, though, it's a 4-way rumble so you'd probably want better protection. Anyway if you do go with ^^^, it gives you 9 extra kg for another pink or possibly DSA if you have Plastic. If you stick with your current setup, try to get some razors rotated so that they are oriented the same way, that way they'll hit at the same time. (even if it's just the two razors on the ends)

(why am I giving advice?)
Title: Re: Hard Bot's Stock Showcase
Post by: FOTEPX on April 18, 2011, 09:05:57 PM
What armour does that have how many pinks?
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 18, 2011, 09:09:44 PM
Bug Bite has plastic. Dispite exposed extenders, He did not get even one ripped off when it fought Berzerker.
Title: Re: Hard Bot's Stock Showcase
Post by: FOTEPX on April 18, 2011, 09:19:33 PM
Bug Bite has plastic. Dispite exposed extenders, He did not get even one ripped off when it fought Berzerker.

Eheh...

Eh...

(https://gametechmods.com/uploads/images/25828Not A Problem.png)

Eh.
Title: Re: Hard Bot's Stock Showcase
Post by: Fracture on April 18, 2011, 09:39:16 PM
Bug Bite has plastic. Dispite exposed extenders, He did not get even one ripped off when it fought Berzerker.
The extender is vulnerable to head-on frontal attacks, i.e. rammers, which you will see a lot of in an AW tournament. Spinners attack from the sides, so Berserker would have hit the razors rather than the extenders.

I'm assuming it has two pinks then, because Riptide from Starcore has the exact same components other than the razors (it has two extenders and three irons, but it still adds up to 34 kg like yours). If you haven't stacked a pink in there, shrink the chassis and do it. Your weapons will be a lot more powerful due to your improved drive and your power will last longer.

Eheh...

Eh...

(https://gametechmods.com/uploads/images/25828Not A Problem.png)

Eh.
That's the best team name ever. 
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 23, 2011, 05:41:05 PM
(https://gametechmods.com/uploads/images/18263screenshot_27.JPG)   Kill 6 is very much insane. It can K-O a DSA chassis in 3 hits. It weighs 248kg and has plastic.
Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on April 23, 2011, 05:43:34 PM
Can you please post weights?

Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 23, 2011, 05:49:55 PM
Update from my previous post.
Title: Re: Hard Bot's Stock Showcase
Post by: Badnik96 on April 23, 2011, 06:05:44 PM
That's not insane. Alter Ego is insane.
Title: Re: Hard Bot's Stock Showcase
Post by: J on April 23, 2011, 07:38:18 PM
TC, try a chassis shape like this:
(https://gametechmods.com/uploads/images/41182LWFireball3.png)
It would give you enough weight to let you upgrade that last razor to an iron
Title: Re: Hard Bot's Stock Showcase
Post by: Ben Purse on April 23, 2011, 08:12:09 PM
Can you please post weights?


(https://gametechmods.com/uploads/images/18263screenshot_27.JPG)   Kill 6 is very much insane. It can K-O a DSA chassis in 3 hits. It weighs248kg  and has plastic.
Can you please post weights?
Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on April 23, 2011, 08:53:02 PM
He edited the post....

Update from my previous post.
Title: Re: Hard Bot's Stock Showcase
Post by: Reier on April 23, 2011, 11:46:18 PM
That's not insane. Alter Ego is insane.
No, Alter Ego II is insane :trollface
Title: Re: Hard Bot's Stock Showcase
Post by: J on April 24, 2011, 01:42:01 AM
All of his 7 alter egos have amnesia.
And as  I type this very post, you may get a case of explosive amnesia
Title: Re: Hard Bot's Stock Showcase
Post by: GarvinTheGreat on April 24, 2011, 11:23:53 AM
Its a good bot but i think you should, um, well I dont remember the name of the glitch but you should put an extender on the Z Tek and then put a Z Tek on that. It will make it SUPER Ppowerful!
Title: Re: Hard Bot's Stock Showcase
Post by: Somebody on April 24, 2011, 12:04:15 PM
Chaining motors. And he's trying to build a LW, so there isn't enough weight for that.
Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on April 24, 2011, 03:07:00 PM
Chaining motors. And he's trying to build a LW, so there isn't enough weight for that.
Orly?


(https://gametechmods.com/uploads/images/96456screenshot_43.PNG)

Second bot
Title: Re: Hard Bot's Stock Showcase
Post by: ty4er on April 24, 2011, 03:08:32 PM
But do you honestly think Hard Bot could do sumthing like that?
Title: Re: Hard Bot's Stock Showcase
Post by: J on April 24, 2011, 09:27:51 PM
But do you honestly think Hard Bot could do sumthing like that?
Maybe if he mashed the pause button enough, and caused the whole thing to "explode like".
Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on April 25, 2011, 12:08:00 PM
But do you honestly think Hard Bot could do sumthing like that?
Yes :P
Title: Re: Hard Bot's Stock Showcase
Post by: Somebody on April 25, 2011, 01:06:09 PM
I was pertaining to the bot he just built, which would require 4 HP Z Teks...

And that LW is outweaponed by most other LW VSs...
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 28, 2011, 06:37:48 PM
(https://gametechmods.com/uploads/images/24218screenshot_5.JPG) Here's my 36-HS Terrorisom 3. It has plastic armor and is 798.3 kg.
Title: Re: Hard Bot's Stock Showcase
Post by: J on April 28, 2011, 06:40:45 PM
Do those upward irons even hit anything?
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on April 28, 2011, 06:41:14 PM
Hmm, that's an interesting looking beast. For one thing, you'll want to rotate your weapons by 90 degrees, so they all point towards the opponent instead of towards the ceiling. You may want to swap the Irons for Maces, as they do a better job at protecting the weak extenders, and it's more likely that they'll all hit at the same time. Y connectors are generally not that good, as they eat up weight, and I can't for the life of me work out what that red extender on the top is doing. Pretty good try, though, but needs some work.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 28, 2011, 06:42:10 PM
It's for extra armor.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on April 28, 2011, 06:43:33 PM
That's pointless.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on April 28, 2011, 06:44:16 PM
If it's for extra armour, then that's really not going to work. At all.
Title: Re: Hard Bot's Stock Showcase
Post by: J on April 28, 2011, 06:46:12 PM
If he positions the Snappers right, he can mount more HP motors on them, and even upgrade to HP.
....Assuming he downgrades the irons the razors.
But that's just me.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 28, 2011, 06:51:20 PM
This how it worked: when it supposed to have DSA, I tried to add an extra Iron. But that exeeded 800 kg. So I downgraded to plastic, and fitted that last Iron on. It said it is 789 kg. So I used the rest of the weight to attach red extenders.
Title: Re: Hard Bot's Stock Showcase
Post by: Virus Bomb on April 28, 2011, 07:17:09 PM
Needs dsa, hp ztek drive, and a better weapon setup to be any good.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on April 28, 2011, 07:38:54 PM
This how it worked: when it supposed to have DSA, I tried to add an extra Iron. But that exeeded 800 kg. So I downgraded to plastic, and fitted that last Iron on. It said it is 789 kg. So I used the rest of the weight to attach red extenders.

Rebuild with DSA, shrink chassis.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 28, 2011, 09:43:26 PM
(https://gametechmods.com/uploads/images/55898screenshot_32.JPG) Kill 7 is more insane than Kill 6. It weighs 248.6 kg and has plastic. the red extender is used to fill in the empty space.
Title: Re: Hard Bot's Stock Showcase
Post by: Somebody on April 28, 2011, 10:58:50 PM
Don't waste that kind of weight with the extender and anchor! Use it on weapons!
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on April 29, 2011, 08:42:20 AM
Don't waste that kind of weight with the extender and anchor! Use it on weapons!

^this^.

And why 3 different kinds of weapons? Seems kinda pointless to me.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on April 29, 2011, 01:17:25 PM
Lose the pointless Baseplate Anchor and red extender on the top, and lose the downward-facing extenders from the weapon arms. Then you could rotate the main extenders 90 degrees, and have 9 maces on your bot. =D
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 29, 2011, 08:27:26 PM
(https://gametechmods.com/uploads/images/40178screenshot_18.JPG) Kill X is 245.9 kg and has plastic. I think i'm tied with S_M for the most effective LW in stock.
Title: Re: Hard Bot's Stock Showcase
Post by: Fracture on April 29, 2011, 08:34:54 PM
That's actually really good, great job. You're a bit overconfident in its abilities, but great nonetheless. I'm wondering if the wheels are a bit low though; doesn't it tip over and lean on the HP Z-tek? Anyway good weapon choice, good chassis, good component setup, and great job overall. Hands down your best bot so far, and definitely tournament viable. Excited to see more improvements like this in the future. I'm hoping the maces are all angled the same way so they'll hit at the same time?
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on April 29, 2011, 08:36:07 PM
I think i'm tied with S_M for the most effective LW in stock.

No, but it's still a big improvement.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 29, 2011, 09:12:18 PM
That's actually really good, great job. You're a bit overconfident in its abilities, but great nonetheless. I'm wondering if the wheels are a bit low though; doesn't it tip over and lean on the HP Z-tek? Anyway good weapon choice, good chassis, good component setup, and great job overall. Hands down your best bot so far, and definitely tournament viable. Excited to see more improvements like this in the future. I'm hoping the maces are all angled the same way so they'll hit at the same time?
It dosent tip over and lean on the HP Z-Tek. And where do I rank on most effective stock LWs?
Title: Re: Hard Bot's Stock Showcase
Post by: G.K. on April 30, 2011, 04:59:47 AM
Yours is inferior to SM, Reier and maybe others.
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on April 30, 2011, 09:24:33 AM
the red extender is used to fill in the empty space.

Obvious troll is obvious.

Notice how sage didn't posted in here ? He probably went FFFUUUUUU- when seeing that red extender (if he even saw it) but wanted to keep his calm composure so he didn't ranted.

Though that's probably what he wants us to think...
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on April 30, 2011, 09:29:13 AM
And where do I rank on most effective stock LWs?
Effective...I'll give you a 6/10 at the moment. Drive and Power are pretty good, and 9 maces is a lot of weapons, but the exposed motor really brings it down for me, and the lack of any sort of defensive capabilities.
Title: Re: Hard Bot's Stock Showcase
Post by: Squirrel_Monkey on April 30, 2011, 01:42:51 PM
DSA is a must for any chance against popups. 2WD is worse than 1WD Meltybrain in testing. Maybe 2WD Meltybrain?
Title: Re: Hard Bot's Stock Showcase
Post by: Enigm@ on May 01, 2011, 03:31:05 PM
Needs to be's invertibles.
Title: Re: Hard Bot's Stock Showcase
Post by: TeamXtreemer on May 14, 2011, 05:27:21 PM
(https://gametechmods.com/uploads/images/16348screenshot_1.JPG) Here is Bug Bite.(https://gametechmods.com/uploads/images/98955screenshot_4.JPG) Here he is beating up Berzerker. He is my AW Faceoff bot.
Weight?
Title: Re: Hard Bot's Stock Showcase
Post by: Sage on May 14, 2011, 05:47:49 PM
fuuu-


Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on May 14, 2011, 08:25:42 PM
i think there is something called PM
Title: Re: Hard Bot's Stock Showcase
Post by: Vertigo on May 15, 2011, 05:02:51 AM
I think i'm tied with S_M for the most effective LW in stock.
Wake up :P

Its decent, nothing more, defiantly not the best LW in stock when you waste weight on a baseplate anchor and extender to fillempty space 
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 15, 2011, 03:34:55 PM
(https://gametechmods.com/uploads/images/12909screenshot_21.JPG) This is Smiter. It has DSA and is 791.1 kg. It has a lot of castor armor on the bottom.
Title: Re: Hard Bot's Stock Showcase
Post by: TeamXtreemer on May 15, 2011, 03:36:27 PM
Ach.
Title: Re: Hard Bot's Stock Showcase
Post by: GoldenFox93 on May 15, 2011, 03:38:53 PM
Not bad for a first crawler, but you could shrink the chassis in order to stack two Blacks, remove the pinks, and therefore provide room for more spikes and armour and things.
Title: Re: Hard Bot's Stock Showcase
Post by: Virus Bomb on May 15, 2011, 03:39:22 PM
no need for the pinks, weapon setup looks sloppy.
Title: Re: Hard Bot's Stock Showcase
Post by: madman3 on May 15, 2011, 03:57:05 PM
Unbalanced weapons are not cool.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on May 15, 2011, 04:09:55 PM
Yep, it's a ghey crawler. :gawe:

The pinks are unnecessary, try to stack a second black in there if you can. The weapon setup looks like it could be much improved, however, and they look extremely irregular. So it won't move or spin cleanly at all.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 15, 2011, 07:21:43 PM
Yep, it's a ghey crawler. :gawe:

The pinks are unnecessary, try to stack a second black in there if you can. The weapon setup looks like it could be much improved, however, and they look extremely irregular. So it won't move or spin cleanly at all.
Think again. It is VERY damaging. It can beat some effective HSes, such as Copyright Infrigerment  and Death Dealer.
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on May 15, 2011, 07:34:09 PM
In a cheaty talentless way.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 15, 2011, 07:35:46 PM
How is this cheaty? There is no custom or cheatbot2 parts this crawler has.
Title: Re: Hard Bot's Stock Showcase
Post by: Sage on May 15, 2011, 07:47:39 PM
oh hai N00Bee

but yea if youre gonna clone do it better...
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 15, 2011, 07:52:26 PM
This is not a clone. This is an original, like Kill X.
Title: Re: Hard Bot's Stock Showcase
Post by: Sage on May 15, 2011, 07:57:05 PM
(https://gametechmods.com/uploads/images/25819Untitled-1.jpg)
This is not a clone. This is an original, like Kill X.


unless you actually did come up with the idea yourself, than that's cool. someone built pretty much the same bot before I did without me knowing, maybe you did as well.
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on May 15, 2011, 08:05:05 PM
How is this cheaty? There is no custom or cheatbot2 parts this crawler has.
You do nothing. You sit and watch it have a seizure and die.
Title: Re: Hard Bot's Stock Showcase
Post by: Fracture on May 15, 2011, 08:08:27 PM
How is this cheaty? There is no custom or cheatbot2 parts this crawler has.
You do nothing. You sit and watch it have a seizure and die.

And I'm guessing you'd be saying the same thing if you were talking to Sage about Bumble Bee when it was first showcased?
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on May 15, 2011, 08:09:23 PM
Sage made the first IIRC. I wouldn't have a problem because it was original. Now the design is run-of-the-mill.
Title: Re: Hard Bot's Stock Showcase
Post by: R1885 on May 15, 2011, 08:31:31 PM
At least it's a functional bot, which in of it self is an achievement to most of your machines, Sparky.

Ontopic: The bot is not that bad. Setup seems a bit sloppy but thats really about it. Removal of the pinks may help a little bit.
Title: Re: Hard Bot's Stock Showcase
Post by: J on May 15, 2011, 09:30:57 PM
weapon setup looks sloppy.
Yea, why is that? He has un-even extenders all over the place o__O
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on May 16, 2011, 10:27:32 AM
Yep, it's a ghey crawler. :gawe:

The pinks are unnecessary, try to stack a second black in there if you can. The weapon setup looks like it could be much improved, however, and they look extremely irregular. So it won't move or spin cleanly at all.
Think again. It is VERY damaging. It can beat some effective HSes, such as Copyright Infrigerment  and Death Dealer.

I never mentioned anything about damage. Any crawler like Sage's Bumble Bee is very damaging. I said that with the uneven and irregular extender work/weapon placement you have, it will be near impossible to drive in a straight line. And the HS's you fought are already slightly outdated, they were BBEANS 5 competitors, getting on for 2 years old. The 36HS was a revolutionary concept back then. Fight some other styles of bots - popups, VS's, et cetera, then get back to me.
Title: Re: Hard Bot's Stock Showcase
Post by: Scorpion on May 16, 2011, 10:42:23 AM
How is this cheaty? There is no custom or cheatbot2 parts this crawler has.
You do nothing. You sit and watch it have a seizure and die.

And I'm guessing you'd be saying the same thing if you were talking to Sage about Bumble Bee when it was first showcased?
Check out the BBEANS 5 thread, i'm not sure about sparkey, but there was a lot of hate directed at Sage for that bot, for these reasons aswell.
Title: Re: Hard Bot's Stock Showcase
Post by: Sage on May 16, 2011, 05:47:51 PM
How is this cheaty? There is no custom or cheatbot2 parts this crawler has.
You do nothing. You sit and watch it have a seizure and die.

And I'm guessing you'd be saying the same thing if you were talking to Sage about Bumble Bee when it was first showcased?

actuallly fracture i got a ton of RAGEEE at me for entering Bumble Bee into BBEANS 5. The idea was to get a crawler with fast controlled movement (which it has) but people missed the point and saw it as a cheap tornado bot of death (which secretly they were all scared to fight).

no worries though, i wouldn't expect you to be caught up on RA2 history this fast.
Title: Re: Hard Bot's Stock Showcase
Post by: Fracture on May 16, 2011, 05:58:37 PM
I just thought Sparkey was being a bit harsh with Hard Bot purely because he was new...i.e. he wouldn't challenge someone like that if they were an experienced builder even though the bot concepts are the same.
Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on May 16, 2011, 06:33:15 PM
I just thought Sparkey was being a bit harsh with Hard Bot purely because he was new...i.e. he wouldn't challenge someone like that if they were an experienced builder even though the bot concepts are the same.
You should have seen sparkey when he was new....
Title: Re: Hard Bot's Stock Showcase
Post by: Sage on May 17, 2011, 12:26:32 AM
I just thought Sparkey was being a bit harsh with Hard Bot purely because he was new...i.e. he wouldn't challenge someone like that if they were an experienced builder even though the bot concepts are the same.

Everyone gets harshed around when they're new! :D
Title: Re: Hard Bot's Stock Showcase
Post by: Jack Daniels on May 17, 2011, 04:18:17 AM

actuallly fracture i got a ton of RAGEEE at me for entering Bumble Bee into BBEANS 5. The idea was to get a crawler with fast controlled movement (which it has) but people missed the point and saw it as a cheap tornado bot of death (which secretly they were all scared to fight).

Thankfully you got off the hook fast when Bumblebee lost.  That'll show 'em!

It just goes to prove that really no bot is invincible in a tournament.  Heck I remember when Popups were consider cheap as well... People used to cry all over the place when those got entered in tourneys.  Nowadays they are totally accepted because people are used to them.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 30, 2011, 04:17:35 PM
(https://gametechmods.com/uploads/images/57510screenshot_25.JPG) [)00lVl has Aluninum armor.
Title: Re: Hard Bot's Stock Showcase
Post by: Enigm@ on May 30, 2011, 04:19:20 PM
What is this I don't even...
Title: Re: Hard Bot's Stock Showcase
Post by: Scorpion on May 30, 2011, 04:23:38 PM
Drive?
Needs double strength aluminium armour, not normal aluminium.
Razorz and maces won't go together that well like that, they'll end up hindering each other, look at other stock HS setups to see better ways of setting them up.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 30, 2011, 04:33:16 PM
This is what happened: I thought I might run out of weight if I used DSA, so I used Plastic. Then I put on standard Aluninum to see If it's still a Lightweight, And it was still. It's weakness is no controlled movment.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on May 30, 2011, 05:26:17 PM
Bit of a ridiculous name. And the weapons are uneven, so that'll compromise it. If you angle the HPZs downwards and outwards slightly, then you could have a bit less weaponry, and a LOT more control.
Title: Re: Hard Bot's Stock Showcase
Post by: Somebody on May 30, 2011, 05:28:17 PM
NEVER change armor until you know you have to.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 30, 2011, 09:08:31 PM
This is probeley where I reached my peak.
(https://gametechmods.com/uploads/images/22418screenshot_39.JPG) [)00lVl now has DSA, I rebuilt the chassis.
Title: Re: Hard Bot's Stock Showcase
Post by: Virus Bomb on May 30, 2011, 09:44:26 PM
does it have controlled movement?
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 30, 2011, 09:45:20 PM
No.
Title: Re: Hard Bot's Stock Showcase
Post by: Virus Bomb on May 30, 2011, 09:47:20 PM
gay.
Title: Re: Hard Bot's Stock Showcase
Post by: Squirrel_Monkey on May 31, 2011, 03:13:39 AM
5 Razors + 6 Maces = Less total weapon HP than Dark Void 2
:P
Title: Re: Hard Bot's Stock Showcase
Post by: Scorpion on May 31, 2011, 03:14:45 AM
Those bots you are fighting have controlled movement, they are skilfully crafted bots that have the most balanced setup for weaponry, drive, armor and battery power.
What you've made isn't a proper bot, as it has no controlled movement, it's essentially a mosh of weaponry connected to a chassis.
Give it some drive (even if it costs you some weaponry), and do what NFX said to both weapon motors, rather than just the one.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on May 31, 2011, 09:06:38 AM
(https://gametechmods.com/uploads/images/64723screenshot_41.JPG) [)00lVl 2's insides.
Title: Re: Hard Bot's Stock Showcase
Post by: madman3 on May 31, 2011, 09:08:56 AM
It needs balanced weaponry.
Title: Re: Hard Bot's Stock Showcase
Post by: Urjak on May 31, 2011, 09:24:53 AM
It needs some controlled movement...
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on May 31, 2011, 11:14:16 AM
No, you just haven't listened at all with that...if you want a robot in that sort of style, one of the bots you might want to look at is SD's Simply Volatile in DoD, or Volatile Partisan in BBEANS 3.

Robot building needs three main parts: Offense, Mobility, Defense. You just have pure offense. You are going to have no controlled movement of any kind, and any robot could easily defeat it.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: Avalanche on May 31, 2011, 03:16:10 PM
Scuse me while i puke.This guy is DEMANDING a ban.If only Kill was not so busy.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: Hard Bot on May 31, 2011, 03:18:05 PM
My cat does not know how to type properly.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: Avalanche on May 31, 2011, 03:20:54 PM
SOFT AS FREAKING FOAM BOT LISTEN UP!YOU NEED TO NOT SPAM,LISTEN TO ADVICE!YOU ARE ON A COLLISION COURSE WITH A BAN!
/endrant.
Oh,and rubbish.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: GoldenFox93 on May 31, 2011, 03:22:44 PM
SOFT AS FREAKING FOAM BOT LISTEN UP!YOU NEED TO NOT SPAM,LISTEN TO ADVICE!YOU ARE ON A COLLISION COURSE WITH A BAN!
/endrant.
Oh,and rubbish.
You don't know what a mirror is, do you mate?
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: Enigm@ on May 31, 2011, 03:22:54 PM
 :rage
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: Hard Bot on May 31, 2011, 03:23:18 PM
This thread needs to get back on topic.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: GoldenFox93 on May 31, 2011, 03:24:19 PM
This thread needs to get back on topic.
I agree. Anyway, do you have something for me to see?   :gawe:
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: madman3 on May 31, 2011, 03:29:53 PM
Tell rrrrrrrrrhhhh that he/she needs to make this bot fare more compact; see if you can get him/her to click the mouse in a smaller area more quickly and accurately.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: Avalanche on May 31, 2011, 04:35:17 PM
Well,a iron spike DOUBLE rack poker,thats invertable,And the remake of MR.Punch.A popup,that OHKO'ed The Starcore V1 Ai pack Resident evil.Still,underweight.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: Hard Bot on May 31, 2011, 04:43:13 PM
(https://gametechmods.com/uploads/images/36164screenshot_43.JPG)
Grubby Joe! I made this bot and it has Plastic.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: Avalanche on May 31, 2011, 04:44:25 PM
Actually,not that bad!Just one thing.Flaming Whizzers a bit outdated.
Title: Re: Hard Bot and rrrrrrrrrhhhh's Stock Showcase
Post by: GoldenFox93 on May 31, 2011, 04:45:36 PM
Quite good, actually! Is it invertable, though?
Title: Re: Hard Bot's Stock Showcase
Post by: ACAMS on June 01, 2011, 12:04:13 PM
This topic is locked for one week in order to give Hard Bot time to throw the damn cat out and practice building RA2 bots!
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 11, 2011, 03:31:55 PM
(https://gametechmods.com/uploads/images/31726screenshot_32.JPG) Here's a bot I made for looks.
Title: Re: Hard Bot's Stock Showcase
Post by: ty4er on June 11, 2011, 03:35:00 PM
Oh dear.
Even for looks that is bad :P
Stock paintjobs aint great tbh and it not gonna move much.
Or do much for that matter.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on June 11, 2011, 03:37:39 PM
...how can you fail with an artistic bot? Even the other not-very-good artistic bots are at least basic enough to be alright, this just looks like a complete and utter mess, in all honesty.
Title: Re: Hard Bot's Stock Showcase
Post by: Wacky Bob on June 11, 2011, 03:42:28 PM
Yeah, the chassis shape is goofy. If you wanna make an artbot, give it an awesome paint job and have blades and random stuff everywhere or something.
Title: Re: Hard Bot's Stock Showcase
Post by: Mecha on June 11, 2011, 03:49:47 PM
That looks really weird, but kinda cool i guess.
Title: Re: Hard Bot's Stock Showcase
Post by: Scorpion on June 11, 2011, 04:21:41 PM
Terrible bot, it looks stupid, has a hideous paint job, is incredibly inefficient and has no form of weaponry what so ever.
Title: Re: Hard Bot's Stock Showcase
Post by: madman3 on June 11, 2011, 04:23:15 PM
Terrible bot, it looks stupid, has a hideous paint job, is incredibly inefficient and has no form of weaponry what so ever.
Go to general chatter for something guitar tabby.
Title: Re: Hard Bot's Stock Showcase
Post by: Vertigo on June 11, 2011, 04:26:46 PM
Never really used this before, but in this case, it seems appropriate:
 :fail:
Are you trying to troll us with bad designs, because if you are, it isn't working
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 11, 2011, 07:41:20 PM
(https://gametechmods.com/uploads/images/63334screenshot_33.JPG) This is a replica of the bot that's getting attacked on the cover of RA2. It's heavyweight and it's 496.8kg with DSA. I named it Slash 'n' Thrash.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on June 11, 2011, 08:34:14 PM
(https://gametechmods.com/uploads/images/63334screenshot_33.JPG) This is a replica of the bot that's getting attacked on the cover of RA2. It's heavyweight and it's 496.8kg with DSA. I named it Slash 'n' Thrash.

 :surprised:
Title: Re: Hard Bot's Stock Showcase
Post by: Pwnator on June 11, 2011, 08:54:17 PM
Uhhh... there are battleaxes in the game, dude. How can you overlook that? :P
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 11, 2011, 08:59:35 PM
It looked better with Axe Heads.
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on June 12, 2011, 03:07:53 AM
Actually I think it's original, I have never seen axe heads used like that.

Still bad though...
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 12, 2011, 06:50:53 PM
(https://gametechmods.com/uploads/images/57477screenshot_35.JPG) This the bot on the RA2 cover that is attacking another bot.
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 12, 2011, 07:46:11 PM
No. Someone with some actual skinning and replicating skill needs to build these.
Title: Re: Hard Bot's Stock Showcase
Post by: Meganerdbomb on June 12, 2011, 08:33:56 PM
These bots are so good. yes! yes! Build more!
(http://img713.imageshack.us/img713/4821/orgasm.gif) (http://imageshack.us/photo/my-images/713/orgasm.gif/)

Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on June 13, 2011, 08:19:13 AM
(https://gametechmods.com/uploads/images/57477screenshot_35.JPG) This the bot on the RA2 cover that is attacking another bot.

Look, I like what you're doing with the replicating. But for every joke bot you make, you should make at least 10 combat-intended bots.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 13, 2011, 04:28:56 PM
(https://gametechmods.com/uploads/images/30360screenshot_37.JPG) Another bot on the box-art of RA2.
Title: Re: Hard Bot's Stock Showcase
Post by: madman3 on June 13, 2011, 04:30:33 PM
(https://gametechmods.com/uploads/images/30360screenshot_37.JPG) Another bot on the box-art of RA2.
Build robots.
Title: Re: Hard Bot's Stock Showcase
Post by: Scorpion on June 13, 2011, 04:37:16 PM
(https://gametechmods.com/uploads/images/30360screenshot_37.JPG) Another bot on the box-art of RA2.
Build robots.
Just ignore his showcase untill he starts trying again
(https://gametechmods.com/uploads/images/92219meerkat.jpg)
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on June 13, 2011, 04:38:34 PM
Out of 10, I give it -3.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on June 13, 2011, 04:44:19 PM
(https://gametechmods.com/uploads/images/30360screenshot_37.JPG) Another bot on the box-art of RA2.

DO YOU EVEN LISTEN?!?
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 13, 2011, 04:47:26 PM
Yes. Look at the earlier pages of this showcase.
Title: Re: Hard Bot's Stock Showcase
Post by: Scorpion on June 13, 2011, 04:51:07 PM
Yes. Look at the earlier pages of this showcase.
Yes, so try and improve on your better designs rather than wasting everybody's time with this rubbish.
You can build far better than this, so please, do so.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on June 13, 2011, 04:51:22 PM
Yes. Look at the earlier pages of this showcase.

Let's see...

- Horrible bot
- Horrible bot
- Horrible bot
- Horrible bot
- Horrible bot
- Horrible bot
- Horrible bot
- Horrible bot
- Horrible bot
- Horrible bot
- Horrible bot

- Horrible bot
- Horrible bot
- Horrible bot

- Horrible bot
- Horrible bot
- Horrible bot

- Horrible bot
- Horrible bot
- Horrible bot

Title: Re: Hard Bot's Stock Showcase
Post by: NFX on June 13, 2011, 04:53:46 PM
Yes. Look at the earlier pages of this showcase.
Yes, so try and improve on your better designs rather than wasting everybody's time with this rubbish.
You can build far better than this, so please, do so.
Pretty much this. The one positive I've noticed over the past few pages is that you've stopped doing the cat stuff. But at least try to build some robots that would be viable in combat, because these are - quite frankly - terrible. Both as combat concepts and replicas. Look at some other showcases, watch Sage's Tutorial videos, and look around the Beetlebros. website for some more hints and tips, and learn how to build effective machines.
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 13, 2011, 04:58:39 PM
(https://gametechmods.com/uploads/images/23285tumblr_l8aiseAXgh1qbq12d.gif)
Title: Re: Hard Bot's Stock Showcase
Post by: Vertigo on June 14, 2011, 03:02:14 PM
Out of 10, I give it -3.
Wow, you're generous
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 14, 2011, 03:48:03 PM
(https://gametechmods.com/uploads/images/18971screenshot_50.JPG) Brony Enforcer can beat Tempus Fugit. Well, at least the prototype kind can. I have not test the real one against it. I hope it can beat Childs Play V. The protoype could not.
Title: Re: Hard Bot's Stock Showcase
Post by: FOTEPX on June 14, 2011, 03:49:13 PM
IT LOOKS LIKE SH*T.
Title: Re: Hard Bot's Stock Showcase
Post by: Vertigo on June 14, 2011, 03:49:23 PM
(https://gametechmods.com/uploads/images/18971screenshot_50.JPG) Brony Enforcer can beat Tempus Fugit. Well, at least the prototype kind can. I have not test the real one against it. I hope it can beat Childs Play V. The protoype could not.
Keep It Simple Stupid :P
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on June 14, 2011, 03:50:16 PM
Well this is much better... though it should be invertible and better drive won't hurt.

Also, make it symmetrical, and don't mess up your weapon system like you did.
Title: Re: Hard Bot's Stock Showcase
Post by: Enigm@ on June 14, 2011, 03:56:08 PM
(https://gametechmods.com/uploads/images/18971screenshot_50.JPG) Brony Enforcer can beat Tempus Fugit. Well, at least the prototype kind can. I have not test the real one against it. I hope it can beat Childs Play V. The protoype could not.
Keep It Stupid Simple
I'm familiar with that phrase.
fixxxxed
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 14, 2011, 04:02:10 PM
Woops guys I hit modify and not quote how do fix  (https://gametechmods.com/uploads/images/75580emot-downs.gif) (https://gametechmods.com/uploads/images/75580emot-downs.gif) (https://gametechmods.com/uploads/images/75580emot-downs.gif)
Title: Re: Hard Bot's Stock Showcase
Post by: Pwnator on June 15, 2011, 04:57:20 AM
Well, you got the space efficiency down, I'll give you that.

Swap the heights of the tank and the anchors (and stack them if you can) and see if you can upgrade your drive to birds.




And why do you guys keep hatin' on him? For once he actually made a feasible (and somewhat cool) concept. Could be worse. Could've been his crappy HSes. :P
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on June 15, 2011, 07:10:37 AM
If you could get the RADs horizontal, it would be a pretty cool bot.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 16, 2011, 03:50:24 PM
(https://gametechmods.com/uploads/images/55995screenshot_38.JPG) [)37RU(710l\l has plastic and is my thing for Iron Bot.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on June 16, 2011, 03:51:04 PM
That looks like such a mess. Where are the wheels?
Title: Re: Hard Bot's Stock Showcase
Post by: Scorpion on June 16, 2011, 03:53:19 PM
One of the messiest bots i've ever seen, i'd drop the idea, it isn't going to work.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 16, 2011, 03:55:31 PM
It is not messy. It has a vertical spinner, two horizontal spinners and an angled spinner.
Title: Re: Hard Bot's Stock Showcase
Post by: Enigm@ on June 16, 2011, 03:55:44 PM
Just...just what is that?
Title: Re: Hard Bot's Stock Showcase
Post by: Wacky Bob on June 16, 2011, 03:56:02 PM
That thing is so gonna die. At least the chassis is reasonably small.

Where are the wheels?

Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 16, 2011, 03:56:17 PM
I did the same idea. Mine actually works, It's also at 793 to boot.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on June 16, 2011, 04:00:58 PM
No wonder I couldn't see the wheels. Honestly, nothing on that robot matches, it just looks like a mishmash of random components thrown together without any order or structure. Try to plan ahead with your robots, and perhaps you won't have it ending up looking quite so messy.
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 16, 2011, 04:02:31 PM
It's gonna tip over :+ D
Title: Re: Hard Bot's Stock Showcase
Post by: G.K. on June 16, 2011, 04:03:33 PM
Guys stop helping him, it'll be one easier enemy in Ironbot! :P
Title: Re: Hard Bot's Stock Showcase
Post by: Avalanche on June 16, 2011, 04:05:23 PM
AHAHAHA.Hmm,maybe ill modify Pins And needles.
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 16, 2011, 04:06:52 PM
You won't do any better :^|
Title: Re: Hard Bot's Stock Showcase
Post by: G.K. on June 16, 2011, 04:07:40 PM
Don't start that sparkey.
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 16, 2011, 04:08:06 PM
Sorry jeekay.


Actually I want to battle him for old times sake. :/
Title: Re: Hard Bot's Stock Showcase
Post by: G.K. on June 16, 2011, 04:08:56 PM
Challenge him then, instead of posting in a way that might cause a flame war.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 16, 2011, 04:15:08 PM
I'll have to do a fight between Terrorisom V against [)357RU(710l\l. Winner of that will fight sparkey989's bot.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on June 16, 2011, 04:18:22 PM
sparkey989

Who's that?
Title: Re: Hard Bot's Stock Showcase
Post by: G.K. on June 16, 2011, 04:19:07 PM
That's sparkey's youtube name.
Title: Re: Hard Bot's Stock Showcase
Post by: freeziez on June 16, 2011, 04:43:08 PM
That's sparkey's youtube name.

-_-
Title: Re: Hard Bot's Stock Showcase
Post by: Meganerdbomb on June 16, 2011, 05:19:07 PM
Don't hate on Hardbot's bot. It's....creative.
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on June 16, 2011, 06:52:43 PM
Don't hate on Hardbot's bot. It's....creative.

Creativity =/= good bot.

Also, as said, this is way beyond messy and generally a bit useless if not for spikeball mode.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 16, 2011, 08:36:21 PM
(https://gametechmods.com/uploads/images/15653screenshot_39.JPG) My 37-HS Terrorisom V. It has DSA and has a caster on the bottom.
Title: Re: Hard Bot's Stock Showcase
Post by: russian roulette on June 16, 2011, 08:39:46 PM
Looks ok, I don't like that random Iron. And use Blue Snappers Instead of green ones. If you use blue snappers you could probably make it invertable as well.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 16, 2011, 08:47:59 PM
I can't. I would, but when I then get out of the Bot-Lab, it looks crazily messy.
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 16, 2011, 08:49:34 PM
It can be messy and good. Somewhere, I have an HS that has the chassis built to the full left of the wheels and the blade, and it still works fine.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on June 16, 2011, 08:55:26 PM
Can you show me it? Sounds effectice. :<l
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 16, 2011, 09:26:05 PM
Tommorow ;^]
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on June 17, 2011, 04:50:34 AM
You really should use SnapperII's (blue ones) to attach your weapon motors to, and you only really need two of them. You only really need two of the Snapper2's to mount four HPZ's on using the eFFe glitch, and that upwards pointing iron isn't going to be doing anything. I'd have added a second caster, personally. But with RAD Drive, that thing is going to be PAINFULLY slow. You do definitely have potential, you just need to be willing to follow advice and such.
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on June 17, 2011, 07:58:12 AM
36HS : you're doing it wrong
Title: Re: Hard Bot's Stock Showcase
Post by: Sparkey98 on June 17, 2011, 05:11:19 PM
Tommorow ;^]

Check my showcase!
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on November 06, 2011, 02:26:00 PM
(https://gametechmods.com/uploads/images/19549pirate flag.jpg) this is a ROBOT ARENA 1 bot. it-z name is AQUARIUS.
Title: Re: Hard Bot's Stock Showcase
Post by: Mr. AS on November 06, 2011, 02:38:20 PM
For reference, here is Aquarius:
(https://gametechmods.com/uploads/images/29194aquarius.png)
look at it while improving your replica of it.
replace that red extender and mace with all black extender, make the paint job a bit lighter, and put the pistons closer to the chassis for more similarity to aquarious.
(I'd tell you to replace the sledges with airtanks, but that'd require some BFE)
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on November 06, 2011, 04:31:24 PM
While I immediately recognized it, it's a bit faily...

You need to use the beetlebros axle motors for this, as well as custom wheels. Also external red airtanks and better weapons.
Title: Re: Hard Bot's Stock Showcase
Post by: J on November 06, 2011, 04:49:42 PM
While I immediately recognized it, it's a bit faily...

You need to use the beetlebros axle motors for this, as well as custom wheels. Also external red airtanks and better weapons.
What he needs, is the mega adaptor.
External airtanks are easy with that.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on February 13, 2012, 10:32:46 AM
(https://gametechmods.com/uploads/images/13756screenshot_5.JPG)
This is a new LW bot called Combination B Exellent Force. It has DSA. Uses 2 casters and a downwards mace to protect against pop-ups. Please notice that it has a stacked control board on anchors, and those casters help its stability.
Title: Re: Hard Bot's Stock Showcase
Post by: Squirrel_Monkey on February 13, 2012, 10:49:44 AM
What were you thinking?
That's going to be unstable or have a really slow weapon.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on February 13, 2012, 10:52:26 AM
It does not tip over, actually
Title: Re: Hard Bot's Stock Showcase
Post by: Squirrel_Monkey on February 13, 2012, 10:54:22 AM
Well, that weight on that unboosted motor will give such a slow weapon spin speed.
Title: Re: Hard Bot's Stock Showcase
Post by: NFX on February 13, 2012, 11:04:40 AM
There are more things to spend weight on than weaponry. Defense, for instance. If something hits that motor, you're dead. I would try to get at least one, if not both of the casters protecting the motor if at all possible.
Title: Re: Hard Bot's Stock Showcase
Post by: Clickbeetle on February 16, 2012, 10:23:40 PM
For some reason I like it.  It's actually somewhat different than the standard LW HS.  But the weapon should be on a Snapper II to get more speed.
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on April 22, 2012, 09:43:03 PM
(https://gametechmods.com/uploads/images/99278screenshot_7.JPG)
It's called CALL 911!1!. It is a realistic bot.
Title: Re: Hard Bot's Stock Showcase
Post by: MassimoV on April 22, 2012, 09:48:46 PM
Needs a better skin and better weapon.
Title: Re: Hard Bot's Stock Showcase
Post by: Natef on April 22, 2012, 10:32:57 PM
Shrink the chassis, and maybe get some HPZs in there.
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on April 23, 2012, 02:45:14 AM
...failure.

Compared to your LW HS it's just plain bad. Too slow, very poor weapon and wedge. "Realistic" doesn't mean "can throw all efficiency to the gutter for the sake of it".
Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on April 24, 2012, 09:53:31 PM
(http://i0.kym-cdn.com/photos/images/original/000/131/351/eb6.jpg?1307463786)
Title: Re: Hard Bot's Stock Showcase
Post by: Mr. AS on April 25, 2012, 06:58:40 PM
it honestly has a godawful paint job, at least download some custom decal packs...
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on December 01, 2012, 12:06:58 AM
I made a replica of a bot in a screenshot on the back of Robot Arena 2's boxart called Scrap Harper. It was seen beating up Ninja, BOT-2O4, and Flame Chopper.
(https://gametechmods.com/uploads/images/10984Scrap_Harper_outside.JPG)
This is what I believed would of been the inside of the bot.
(https://gametechmods.com/uploads/images/58762Scrap_Harper_inside.JPG)
I also assume that it has Double Strength Aluninium armour and  weighes 224.4 kg, because that's what the game calcuated based off the the components.
Title: Re: Hard Bot's Stock Showcase
Post by: Pwnator on December 01, 2012, 12:43:35 AM
Pretty sure it's "Scrap Hanger", but whatevs. looks cool anyway
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on December 01, 2012, 05:34:01 AM
It's original, but apart from that...
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on August 06, 2013, 11:22:52 AM
I made a replica of an RA1 bot called Red Giant. It doesn't exactly resemble it, but that's because of Robot Arena 2's chassis and component limitations.
(https://gametechmods.com/uploads/images/88407red_giant.jpg)
(https://gametechmods.com/uploads/images/12461red_giant_inside.jpg)

For comparison here it is in RA1:
(https://gametechmods.com/uploads/images/64376red.jpg)
Title: Re: Hard Bot's Stock Showcase
Post by: Mecha on August 06, 2013, 12:31:08 PM
People are probably gonna hate on it, but i like it. :)  :thumbup
Title: Re: Hard Bot's Stock Showcase
Post by: 090901 on August 06, 2013, 01:03:59 PM
I would try reskinned grannies instead of mud tries here.
Title: Re: Hard Bot's Stock Showcase
Post by: Naryar on August 06, 2013, 03:35:05 PM
Make a bigger chassis, mod the airtanks so you can put them outside...

build it in DSL really it'll just be better
Title: Re: Hard Bot's Stock Showcase
Post by: Hard Bot on December 07, 2018, 05:34:49 PM
I am back to playing stock again since a few or so months ago. The Starcore V4A AI pack has challenged me to improve my bot building. Here is a bot I have already refined several times. I named it after a bot that was featured on the back of the cover box of RA2. I like putting sponsor decals on robots, even in stock. It has DSA armor.
 [ This attachment cannot be displayed inline in 'Print Page' view ]
This what it looks like when inverted:
 [ This attachment cannot be displayed inline in 'Print Page' view ]  
It can also occasionally destroy other LW rammers with luck:
 [ This attachment cannot be displayed inline in 'Print Page' view ]
Title: Re: Hard Bot's Stock Showcase
Post by: Reier on December 07, 2018, 05:43:16 PM
basic but solid. good job
Title: Re: Hard Bot's Stock Showcase
Post by: Billy5545 on December 07, 2018, 07:36:12 PM
Welcome back
Title: Re: Hard Bot's Stock Showcase
Post by: Badnik96 on December 08, 2018, 05:15:04 PM
wb noob

bot looks solid but youre wasting weight on baseplate anchors
Title: Re: Hard Bot's Stock Showcase
Post by: Dreamcast on December 10, 2018, 04:02:39 PM
Even though you named it after a generic robot, it vaguely reminds like Scrap Box from SCv4.

If you use a snapper setup and only one or two anchors, you should be able to get more spikes.
Title: Re: Hard Bot's Stock Showcase
Post by: Redalert on December 10, 2018, 04:52:02 PM
Even though you named it after a generic robot, it vaguely reminds like Scrap Box from SCv4.

If you use a snapper setup and only one or two anchors, you should be able to get more spikes.

Actually, Spikes on baseplate anchors are harder to knock off, because there are no exposed extenders.
Title: Re: Hard Bot's Stock Showcase
Post by: Reier on December 10, 2018, 07:29:07 PM
Even though you named it after a generic robot, it vaguely reminds like Scrap Box from SCv4.

If you use a snapper setup and only one or two anchors, you should be able to get more spikes.

Actually, Spikes on baseplate anchors are harder to knock off, because there are no exposed extenders.
and way less efficient by weight