FreddieTheRobot's... um... Robots.

[FreddieTheRobot]

First Robot Bubbleman helped me (Hi- Bubbles)
Here It is:

[Natef]

Welcome!

I think razors would be better on a spinner.

[GoldenFox93]

Hi there- welcome to the forums!

Not bad for a first robot, but I'd recommend upgrading to Z-tek motors with the weight you have, and try using Irons on connectors for the spinner.

[Wacky Bob]

Pretty good bot.

Middleweights can go up to nearly 400.0 in weight. You want to try to get as close to the limit as possible.

So you could change the drive motors to HP Z-teks and add more and better weapons. And one Black Battery could probably supply this bot with all the juice it needs. If you rearranged the insides, you could also add a snowplow.

[NFX]

Welcome to the boards. =] Not too bad for a first bot, I reckon, but there are a few things to take note of.

Middleweights can weight up to 399.0kg, and you should always try to use as much of the weight as possible, without wasting it. Empty space inside the chassis is a big eater of weight, so you should try to get it as small as possible for the components.

In terms of batteries, one Blackvolt can power 4 HPZ-Teks for 3 minutes. This bot only needs one, therefore, so that gives you some more weight to play with. I think HPZ drive might be a bit fast, so try to get a secondary weapon HPZ on the SnapperII, which you should be able to do with the eFFe glitch.

As for weapons, maces and iron spikes are normally the best for a HS, so try to use them if you can. I think you could attach a snowplow or ramplate on the front with a Baseplate Anchor if you have the weight for it, as this could use some form of defense.

[FreddieTheRobot]

Meowzers Sounds Like a Cat But Is A robot

[GoldenFox93]

Meowzers Sounds Like a Cat But Is A robot

(Image removed from quote.)

Much better, but I can see you using up the extra weight for something like six irons if you use black extenders well.

[Bubbleman]

HEY, I MADE THAT AS AN EXAMPLE!!! 
...
Good work on your first splash (I made What The Brown's splash)...

I'll post the bot i Kloned it from in my showcase (made that too ^.^)

[FreddieTheRobot]

Yea Bubbles Made It So I Posted It Great Robot Its Awsome I Changed My First Robot A bit though

[Bubbleman]

Well make a splash then and we'll give you advice :P

Also, why all the caps?

[Bubbleman]

Did that upload correctly? i cant see it, just a broken link sign :s

EDIT: Ninjad

[Conraaa]

The spaces in the filename broke it I think

[FreddieTheRobot]

I Will Try Again From Beginning to Upload

[FreddieTheRobot]

What The Brown#2

[FOTEPX]

No. You've got the weaponry all wrong, use the same type of weapon on all of the extenders. So, use 3 irons or 3 maces instead of that setup you have there. Also, you only need 1 black for that, and you can make that chassis smaller.

[Wacky Bob]

What's the weight?

[NFX]

Okay, that's going to be quite unbalanced. A spike strip weight 14kg, so the Snapper's going to be bouncing around like there. FOTEPX has it right, use the same sort of weapon on all three extenders, and you can also attach a second extender parallel to the first with the side attachment points, and you can attach 3 more weapons to it.

[Hard Bot]

There's this glitch armor called DSA. To get it, you must ignore the armor tab. Only use plastic when you don't have enougth weight left.
Use these weapons:
Maces
Razors
Iron Spikes
Ninja Stars and static saws if you want to make a sawbot(not recomended).

[madman3]

There's this glitch armor called DSA. To get it, you must ignore the armor tab. Only use plastic when you don't have enougth weight left.
Use these weapons:
Maces
Razors
Iron Spikes
Ninja Stars and static saws if you want to make a sawbot(not recomended).

Saws are only really good on frequency rammers like that one SM made recently. Or that sawbot Wacky Bob made.

[Bubbleman]

nice bump :P
for a moment then i thought that a new bot had been posted :P