gametechmods
Robot Arena => Showcases => Stock Showcases => Topic started by: Doomkiller on June 12, 2009, 04:06:28 AM
-
I put this off for a while as i was mostly playing dsl but i might as well make a stock showcase
heres my first bot:
Name: MEH
Type: pop up
Weight: 389.7
Armor: DSA
Weapons: Two snapper 2 with razor tips
Flipper (2 small wedges powered by 2 Snapper2)
Batteries: 1 black batt
Drive: granny wheeld powered by HP Zteks
(http://img3.imagebanana.com/img/tut7nrb2/MEH.jpg) (http://img3.imagebanana.com/)
My best mw. takes out all the stock ai bots. untested in starcore
and it did this in 1 hit:
(http://img3.imagebanana.com/img/hyg78j8b/screenshot_18.jpg) (http://img3.imagebanana.com/)
Name: MEH with attitude
Type: pop up
Weight: 687.7
Armor: DSA
Weapons: Two ddt and 1 snapper 2 with razor tips
Flipper (4 small wedges powered by 2 Snapper2)
Batteries: 2 black batts
Drive: granny wheels powered by HP Zteks
(http://img3.imagebanana.com/img/z57bleqm/meh2.jpg) (http://img3.imagebanana.com/)
hw version of meh. I know its under weight so im gona try to make it 4wd
Name: Ultimate Atom Split
Type: rammer
Weight: 792.1
Armor: DSA
Weapons: 2 piston with a beep load of iron spikes
Flipper; non
Batteries: 2 black batts
Drive: 4 shiny hubs powered by HP Zteks
(http://img3.imagebanana.com/img/4y2oq5z/UltimateAtomSplit.jpg) (http://img3.imagebanana.com/)
a rammer i built a while back. Atom split was the original version with 2wd, 8 pistons with 1 razor tip on each piston
Name: Drunk With 2 Saws
Type: VS
Weight: 245.2
Armor: DSA
Weapons: 2 saw powered by reversible angle motors
Flipper; chassis wedge
Batteries: 1 black batts
Drive: 2 shiny hubs powered by Zteks
(http://img3.imagebanana.com/img/qzkh4if/DW2S.jpg) (http://img3.imagebanana.com/)
a vs i built a while back, probaly upgrade it 2day
comments please:mrgreen:
-
You already stated most of what you needed to do, so I'm not gonna say much here.
As for the HW popup, you can use a snapper for 2 wedges instead of 1 for each.
Oh yeah, MEH's snappers aren't symmetrical. And for the rammer, put a black in front of the other instead of side-by-side so you can shrink the chassis.
Hmm...I got nothing else to say. XD
-
Oh yeah, MEH's snappers aren't symmetrical.
I see what u mean. Ill go and fix that up now
-
how much reach does the HW pop up get ? looks like it could have troubles maybe with the extra weight change the 20cm extender for a 40 to fix the reach or if it isnt a problem stack another supervolt in there :-D
-
how much reach does the HW pop up get ? looks like it could have troubles maybe with the extra weight change the 20cm extender for a 40 to fix the reach or if it isnt a problem stack another supervolt in there :-D
it has the reach but unfortuatly i have yet to be able to stack a black batt so yeah... ill keep trying though
-
Saws reak, use disks or tribars with spikes if you want a vertical weapon.
-
Saws reak, use disks or tribars with spikes if you want a vertical weapon.
they do? dam ill have to remake that then
-
meh
(http://img3.imagebanana.com/img/5qk4jnr2/mehv2.jpg) (http://img3.imagebanana.com/)
upgrades of stock bots i did a while back
(http://img3.imagebanana.com/img/aa0geydc/replicas.jpg) (http://img3.imagebanana.com/)
any1 like?
-
Hmm... I like mostly Ronin... Roly Poly 2 & Bot-204 are little abit messy...
-
Ronin looks awesome. Try to get rid of the rear spikes and put them up front. And use DDt wedges so it can self-right (from the looks of it you are using Snapper2s).
As for MEHv2, I don't think the piston does much. Instead of using 2 Snapper2s per side, use one instead and one wedge per side is also fine. Use the extra weight for protection against HS.
-
I made a new Bear once and replaced the arms with 2 vertical disc weapons with bear claws
-
@Jonzu95: i did those a while back, stock went screwwy so i replaced that and i wanted to see what bots i had saved. i have a lot more that those few
@Pwnator: Ur wrong, ronins wedges are on server motors (what was i thinking?)
as for MEHv2 that sannpers actually fip bots, seeming 1 snapper 2 lifts 200kg, 4 lift 800kg
@JoeBlo: mustve looked cool but i wanted to keep the theme so mine is still a hammer bot
-
As for MEHv2, I don't think the piston does much. Instead of using 2 Snapper2s per side, use one instead and one wedge per side is also fine. Use the extra weight for protection against HS.
No.
-
Ronin has WAY to much spare weight, could i see the insides of it?
-
No.
Wha?
Ronin has WAY to much spare weight, could i see the insides of it?
I know ronin has way to much spare weight because when I did him, i didn't know all the tricks (i still dont lol)
U asked for it:
(http://img3.imagebanana.com/img/x50cwqy/ronin.jpg) (http://img3.imagebanana.com/)
yes i know pinks are bad
-
yes i know dp
update on redzone:
(http://img3.imagebanana.com/img/qbrugx7h/RedzZone.jpg) (http://img3.imagebanana.com/)
Im not happy with scout though. any suggestions? :)
-
don't keep using the same document for skins, export a new graphic to get the correct sides for the bot your building
-
You can turn Scout into a Wammer if you want to. As for ALARM, instead of using 4 small tanks, use a big tank and turn it sideways.
Sentinel could still go on a diet if you arrange your parts carefully.
-
after not playing stock for a bit, I got playing stock again showing my friend this agme while he was over for my dads 40th birthday, which he ended up being drunk...
Anyway this is what we created:
(http://img3.imagebanana.com/img/bi5mgiis/doom.png) (http://img3.imagebanana.com/)
i know a bit of empty space so I did this:
(http://img3.imagebanana.com/img/3l3512zz/doomv2.png) (http://img3.imagebanana.com/)
:)
dsa
-
odd, nobody did a comment on it...
(http://img3.imagebanana.com/img/1ctx8ryk/razor.png) (http://img3.imagebanana.com/)
Technical Data:
2 black batts
2 HP-Z tek
shiny hubbs
Weapons: 24 razor tips on 4 disc
dsa
yeah
-
Not bad.
Your wedges should be farther from each other... not overlapping.
-
You don't need a rear stabilizer. Widen the wedges and if possible add another plow for protection (or casters if you have more weight).
-
Not bad.
Your wedges should be farther from each other... not overlapping.
Really? will that help make it less wobbly? if soo I will
-
I think it wobbles because the motors are mounted on a vertical snapper. Use a horizontal snapper and see if it works.
-
... ... ...
which snappers?
-
Oops. Didn't say that clearly. :P
Mount a blue snapper to the chassis using its hidden attachment point and attach the motors there. Test if they still wobble. :D
-
nice work the VS has a nice look to it but as naryar said maybe separate the wedges
also you never did send me the BMP or PNG version of that background.... no urgency right now as im working on clash cubes 2 but I would like to work on a few more skins with your designs :)
-
nice work the VS has a nice look to it but as naryar said maybe separate the wedges
also you never did send me the BMP or PNG version of that background.... no urgency right now as im working on clash cubes 2 but I would like to work on a few more skins with your designs :)
Lol I totally forgot about the background. I'll send it now.
-
lw pop up
(http://img3.imagebanana.com/img/shv4ba94/idc.png) (http://img3.imagebanana.com/)
not really impressed with this one but it was the best I could create
meh upgrade
(http://img3.imagebanana.com/img/8otdl6y3/meh.png) (http://img3.imagebanana.com/)
more damaging and more armour
attitude
(http://img3.imagebanana.com/img/em3033bx/att.png) (http://img3.imagebanana.com/)
bigger. better, more damaging.
all have dsa
-
I like the unique scoop placement on Attitude, not sure is the scoop on meh v2 will aid the pop up much.
nice bots all around though
-
Upgrade on IDC
(http://img3.imagebanana.com/img/2wzttb40/udk3.png) (http://img3.imagebanana.com/)
4 razors. I was wondering would it be better to have a snapper 2 with only 2 razors and castor armour would be better or not?
-
I've never seen a successful castered LW popup before (sans Click's Noble Sacrifice), but make one yourself and test it. But I think I'm gonna like this one better. :D
-
I've never seen a successful castered LW popup before (sans Click's Noble Sacrifice), but make one yourself and test it. But I think I'm gonna like this one better. :D
Ill give it a shot but this version does a lot of damage and I allready like it as it is lol
-
the chassis wedge is way too steep
-
and here is a new bot: chocking grip:
(http://img3.imagebanana.com/img/s6v3r34/chockinggrip.jpg) (http://img3.imagebanana.com/)
Just wanted to try something new. Might swap the axes for irons though and rebuild the chassis to get rid of the empty space
-
fill in the empty space with 2 more snappers and make a sremech for it maybe another black although I dont think it would be all that necessary
-
fill in the empty space with 2 more snappers and make a sremech for it
its invertibale :mrgreen: Lol but ill see
-
Use the big tanks instead of the small ones instead since they have a higher air-to-weight ratio. Also, axes are kinda nice on this kind of bot. Use the extra weight for a faster drive and wedges (if possible).
-
Use the big tanks instead of the small ones instead since they have a higher air-to-weight ratio. Also, axes are kinda nice on this kind of bot. Use the extra weight for a faster drive and wedges (if possible).
I tried for a faster drive but i couldn't get the angle right. Ima gona cgo do a complete rebuild of it now :-D
-
its invertibale :mrgreen: Lol but ill see
funny since in the top picture it appears the wheels dont reach but maybe its just the angle
-
funny since in the top picture it appears the wheels dont reach but maybe its just the angle
yea it's just the angle.
-
Do you have enough weight for axes like pwn said? Maybe in your rebuild...?
-
Do you have enough weight for axes like pwn said? Maybe in your rebuild...?
It does have axes.....
-
I meant as in hammers.
-
i seem to be playing stock recently
Anyway a MW FS
(http://img3.imagebanana.com/img/7q294z62/InUrFace.png) (http://img3.imagebanana.com/)
dsa :-D
-
I think you could lighten your extender work and possibly chassis, also if you lower your extenders you can use smaller disc's and with all your extra weight get irons
-
SWEET SKINS
not
-
Here is my origianal ( hopefully ) bot for doomed bots:
(http://img5.imagebanana.com/img/7thwi6v5/overroad.png) (http://img5.imagebanana.com/)
Basically the idea is to go on top of the opposing bot and fire directly at the chassis. Hope it works though not exactly hopeing for a win :P
-
Cool concept, but even Reckless Infiltrator has more weapons. :P
You should have a srimech, lighter extender work and a smaller chassis. :D
-
Cool concept, but even Reckless Infiltrator has more weapons. :P
You should have a srimech, lighter extender work and a smaller chassis. :D
Good idea but..... Am I trying to win my own tournament? :dead:
-
If I were you I wouldn't. But I wouldn't give them easy wins, too. :P
-
Just wanted to do something war themed for RAW2
(http://img5.imagebanana.com/img/nu6w2xhk/shotgun.png) (http://img5.imagebanana.com/)
Ima gona go do a couple more MBs :)
-
2 pinks for 4 HPZs?!?!! :O
Try attaching the piston via the snapper so you can shrink the chassis. :D
-
Its actually 4 pinks lol
Good idea about the snapper piston, just originally didnt do it because thought it would hinda the piston
-
you could get a bit more in there as far as batters go.. drop to shinys and you can use smaller air tanks as they are incredibly easy to stack
-
Actually I wouldn't the the airtanks thing if I were you...2 small tanks are the same as a large but weigh more if I'm not mistaken.
-
Plan for ideas for RAW2:
1: update DBS to have piston on snapper and black
2: The faces of Wolverine: Side Hammer/Hammer MB
3: Tank @ Witch ( cookie to whoever guesses what game I took that off) HS/VS MB
4: Uknown name as of yet: MB Face spinner
-
DP but I need help:
I have no idea on how I should put a wedge in this:
(http://img5.imagebanana.com/img/rovg1rjd/testing.png) (http://img5.imagebanana.com/)
BTW, Stack blacks and NON tested in battle yet
I just wanna wedge lol
Edit: Weight is 388.4
-
Replace the middle anchor with a green snapper. You might need some snapper loading to put the plow and the wedge.
-
Ill give that a go, thanks. my brain is a little bit rusty lol
-
Plan for ideas for RAW2:
1: update DBS to have piston on snapper and black
2: The faces of Wolverine: Side Hammer/Hammer MB
3: Tank @ Witch ( cookie to whoever guesses what game I took that off) HS/VS MB
4: Uknown name as of yet: MB Face spinner
Left 4 dead. Cookie please.
-
my first bot ever built and what ive entered in noob warz
(http://img5.imagebanana.com/img/15iaxfvf/heckkinght.png) (http://img5.imagebanana.com/)
titanium :D
And I think I spelt Hellknight wrong too lol
-
DO I GET MY COOKIE NOW?!?!?! RAAAAARGGHHHH!!! I LIKE COOKIES!!
-
Here:
(http://img5.imagebanana.com/img/1asyi2l4/cookie.png) (http://img5.imagebanana.com/)
Hope u like it
not I didn't make this and no, clicking on the pic will not let u download it :P
-
10KG?!?!?! 4K HP?!?!?! 8 APs?!?!?!?! :O
Must be the chocolate chips. XD
-
Don't say I didn't give u a warning :)
(http://img5.imagebanana.com/img/qkg939i2/Witch.png) (http://img5.imagebanana.com/)
And its still not in its final stages
-
hopee you guys took my warning :)
Anyway, I was bored and decided to try to make as many LWs from this chassis:
(http://img5.imagebanana.com/img/79xozrou/Chasiis.png) (http://img5.imagebanana.com/)
and here is what I have come up with so far:
(http://img5.imagebanana.com/img/r458w3rk/InfectiousFS.png) (http://img5.imagebanana.com/)
Infection FS, Is a FS, without a wedge. It likes to eat up exposed parts and chassis. Only problem is, rammers can hit that bit of exposed chassis at the front, and with Plastic, It doesnt survive long with multiple hits to the chassis. A good bot, nonetheless
(http://img5.imagebanana.com/img/76rurmyw/InfectionHS.png) (http://img5.imagebanana.com/)
this is me, trying to clone Tick into a LW. DSA, And a wedge eater, Infection HS also doesnt have a wedge. Right now, im trying to get the weapon rads and make them into Redbirds, But its proving very difficult. It has almost defeated JoeBlo's iron outlaw FL in an online match, against Joeblo :)
-
You can still make the chassis a bit thinner since anchors can be stacked. I like the FS (which reminded me that I need to rebuild my LW juggler).
I couldn't say much about the HS, but good luck trying to attach birds there. :D
-
Take that LW HSes
(http://img5.imagebanana.com/img/th5fi0gy/Hellyeah.jpg) (http://img5.imagebanana.com/)
:-D
-
More awsome bots, using that chassis
(http://img5.imagebanana.com/img/k898rg3v/InfectionFL.png) (http://img5.imagebanana.com/)
Sure, flippers arnt damaging, but when the flipper is powerfull enough to do backflips, It fun as to use. Best moment, Flipping tornado in the octogon arena, then doing a backflip while tornado lands in the pit :)
awsome OM NOM NOM moment. DSA
(http://img5.imagebanana.com/img/8qht30w9/ImfectionPU.png) (http://img5.imagebanana.com/)
Now who doubted that I could make a pop up with this chassis? Come on , speak up people, because I did. However, here it is, A PU Infection, That 1 hit KOed Tempist fugit. If only it had a wedge.... and if it didnt have plastic armour.....
-
I think the flipper wedges are kinda too wide for a LW (I haven't seen much LWs that wide, sans HSes). And good job on protecting most of the front while using that chassis wedge, but I still fear that HSes can quickly remove the snappers if the popup doesn't get under them quickly.
-
It has almost defeated JoeBlo's iron outlaw FL in an online match, against Joeblo :)
yeah it did fair well considering you got lagged to death and then Iron Outlaw FL removed the wheels haha
hmm that LW weapon variations concept seems similar ? haha
-
I dont see how that one bot is DSA but i know it has problems with hses cause of that exposed chassis because when I built Floe 2 I had huge problems with HSes no matter what I did to the front before I added a plow.
-
More awsome bots, using that chassis
(http://img5.imagebanana.com/img/8qht30w9/ImfectionPU.png) (http://img5.imagebanana.com/)
Now who doubted that I could make a pop up with this chassis? Come on , speak up people, because I did. However, here it is, A PU Infection, That 1 hit KOed Tempist fugit. If only it had a wedge.... and if it didnt have plastic armour.....
Thats not a popup, at least I think, wouldn't it be a pop down, lol or a hammer bot?
-
I was wondering that too, how does that even scoop up the enemies without a wedge and the plow like that?
-
Witch, RAW2 Entry:
(http://img5.imagebanana.com/img/yllrg4jt/Witch4.png) (http://img5.imagebanana.com/)
Yes, I know, Skin Fail
-
(http://img5.imagebanana.com/img/oatbsj8z/Fun.png) (http://img5.imagebanana.com/)
^fun^
-
I was doing the exact thing the other day :-D I was going to make a tournament for it
-
Expo-zed motors!! Aieeeee!!!
-
they are just for fun :P I did it with the rookies bots for fun realistic rules and attempting to keep the bots function the same :-D its also fun to make the worst possible robot you can build but still win with XD
-
Tribute to Sadrabbit:
(http://img5.imagebanana.com/img/v2xehqff/Quelch.png) (http://img5.imagebanana.com/)
Doesn't do too bad, Dispatches most bots quickly. Motor usually gets knocked off agaisnt bots like fury.....Good wedges too.
DSA
-
looks good, albeit a bit underweaponed.
-
I can't look away from your creepy new avatar....
-
SFTW FLEET AND LEGO RIPTERRA WERE BETTER! :P
-
I can't look away from your creepy new avatar....
lol somebody's avatar is a spongechu
-
SFTW FLEET AND LEGO RIPTERRA WERE BETTER! :P
But Pikabob (or spongchu) "CANNOT BE UNSEEN :0" according to pwn.
-
WHAT HAS BEEN SEEN
-
It's staring right at me :O
-
(https://gametechmods.com/uploads/images/61539117937756943.gif)
-
Wha...? Since when did my showcase become a...
Whoa, that is a weird avatar.....
-
yeah, Somebody's new avatar scares me.
And the bot would perform better if those 2 irons were placed like the others, but then it would be less like Sad Rabbit :(.
-
yeah, Somebody's new avatar scares me.
Its wooooorking...
-
*Hides*
-
OH GOD
-
I found the pic, so I'm somewhat immune to its effects. :P
Anyway, try a version with all irons and another with all razors and pit one against the other. :D
-
(http://www.imagebanana.com/img/q1sdtheb/RE.png) (http://www.imagebanana.com/)
-
More irons.
-
Can't. No more weight
-
1. Make the chassis smaller
2. Don't use so many extenders
3. Moar ironzzzz
4. Add protection for the wedge extender
5. Make the Z-teks closer to the chassis so the wedge can be used
6. I forgot what 6 was...
-
1. Had to use that chassis, cause it's my tourney bot for stocks revenge...
2. Realisticness
3. I allready said it
4. maybe....
5. was actually meant to be one that picks up bots with the irons, the wedge was only there just in case
6. OK
Edit: Ya know, most of this stuff I allready know......
-
you could really use shiney's and do away with the wedge
VS robots naturally get out-wedged by robots like pop up's meaning the wedge would prevent the weapon from gettign and action .. if that makes sense ?
-
gettign? never heard of that word before.
The wedge actually helped, cause it would trap the robots if they were to try to get under
Needed to use grannies, wouldn't drive with shinies.
-
The wedge actually helped, because it would trap the robots if they were to try to get under
don't start with me :P I type to fast when I trying doing a lot at once
-
Nice, I thought about doing Ripblade cause it's one of only 3 possible VS's, but it's hard to work with. With so few HS's in Stocks Revenge (probably) it should do well.
Now there's two Scrappers bots... someone make an Arc Pounder! Double strength plastic, oooooh scary.
-
Well, It's been A while since I posted a bot here, so what the heck.
(http://www.imagebanana.com/img/v27b8mh/TBK.png) (http://www.imagebanana.com/)
My BTTB bot. DSA.
Yes, It can destroy RPB
No, it cant outwege NWB no matter how much I tweaked the wedge.
-
I swear you used that name so many times :P
its cool but those bracket wedges wont last long with those exposed red plastic extenders
-
Amazingly they do. Not even RPB could rip of those extenders. The brackets would go first.
And yeah, that name is overused :P
-
The Black Knight should have black extender work. Otherwise it doesn't deserve the name. :P
With the snappers to attach the weapon motors, use them to burst the drive as well. With the free weight, give it 2 DDT wedges.
-
Why didn't I think of that?
Should play stock more often :/
Will do it, but probably not soon enough to send it to G.K.
-
Smaller chassis definately possible.
Hope it doesn't outwedge my bot (See my showcase)
12 irons?
-
DK, d'ya want me to BFE on the black extenders?
-
S_M Yes, 12 irons. Still kills maelstorm though
G.K. Wouldn't that be bending the rules? :P Go ahead if you want to, ima gona go see If I can make a bursted drive version
PS: The batts are stacked.
-
I'm not bending the rules, I'm just saving you time. But I'll wait until you decide about any updates.
-
Well, I dont have any time left today, but i'll defiently try it 2moz.
If I don't get back to you before monday, just do the BFE thing ok?
-
Sure.
-
(http://www.imagebanana.com/img/ukxymiuo/TBK2.png) (http://www.imagebanana.com/)
It works. Every now and then :P
-
Try turning around the DDTs so the wedges have a wider stance.
-
AS long as I don't have to snapper load the whole entire thing again :P
-
You have just over 10 hours to send me the update. (You accidently sent me an unfinished one before)
-
Well, I swaped over the DDts.
Still doesnt do it D:
-
Turn the inner drive HPZs 180 degrees so you have higher turnspeed.
-
They are attached to the one extender. To make it, I would have to put another extender on there, and I don't have the weight for it..
-
Well, my computer just got recently attacked by 34 viruses and trojans (don't worry all my stuff is safe and the comp is working fine now) but because of that, I wanted to find out what bots I had on my usb.
I found these 2 good ones:
First, doommyster v3
(https://gametechmods.com/uploads/images/48836DMS v3.png)
Bot I built ages ago. Plastic. 12 irons.
AND I FOUND MY DEMENTIA REBUILD !!!!
(https://gametechmods.com/uploads/images/56368dementia.png)
eah, wedges suck, but it was more designed to man-handle HSes.
Might try to build some more mw stock robots now...