gametechmods

Robot Arena Matches => Tournaments => Tournament Archives => Topic started by: 8bean on September 01, 2019, 09:54:32 PM

Title: Micro Machines [SIGNUPS CLOSED]
Post by: 8bean on September 01, 2019, 09:54:32 PM
 [ This attachment cannot be displayed inline in 'Print Page' view ]  

GENERAL RULES
-DSL IRL
-32 entries
-Double Elim Bracket
-Trauma Pit

BUILDING RULES

-There is NO WEIGHT LIMIT
-the catch? your bot must fit within the custom smartzone
(the download for it is here)   [ This attachment cannot be displayed inline in 'Print Page' view ]  
-pixel chassis and bfe is allowed
-steel 10 armor is not allowed
-2 betas max or 3 of the other bursts max allowed on a bot
-For typhoons, 4 large or 6 small max for verts and 6 large or 8 small max for horizontals
-Other weapons will be judged on a case to case basis, just don't be stupid
-A bot that utilizes servos or a beta not powered by bursts will be accepted only if it is already AI'd
-locked npcs, colored bars beaters and typhoons, and other skinned components are allowed
-I retain the right to reject any bot for any reason
-One bot per person unless the entry limit cannot be reached where it will be opened up to two per
-multibots are allowed but you must send a version that has both halves connected to ensure they both fit inside the smartzone
-only cheatbot2 components allowed are hworf blades, overkill servos, and slow flatmotors
-no sns or thwackbots
-no fast flatmotors

FIGHT RULES
-3 min fight
-If a robot has all of its wheels removed then it will be considered knocked out
-A manual countdown will be initiated if a bot cannot show controlled movement for more than 20 seconds

Entries

1: Ronun
2: Tornado Twins
3: Dura Volt
4: laughing stock
5: Cunning Plan
6: MEANIE
7: Cold Saw
8: REDRUM
9: 10 Minute Panic
10: Yall gonna lose to this
11: Rottytops
12: flip the sclaes
13: Ditto
14: Bad Vlad
15:  Aids
16:  C38 Micro


Rejected
Accepted
Accepted and AI'd
Title: Re: Micro Machines [DISCUSSION]
Post by: NickyDustyOwl on September 02, 2019, 07:43:51 AM
Really Interesting Idea, I would enter this.
Title: Re: Micro Machines [DISCUSSION]
Post by: [cringey name goes here] on September 02, 2019, 07:52:00 AM
The weight limit rule has me questioning. You can easily just set it to LW or something less.
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 02, 2019, 10:56:16 AM
The weight limit rule has me questioning. You can easily just set it to LW or something less.

If i just set it to lw tho then there would be basically no point in making the size requirement because its near impossible to make a lw bigger than that square

also if it was lw then every match would just be a contest between whoever has the beefiest weapons on their overhead  heck
Title: Re: Micro Machines [DISCUSSION]
Post by: 090901 on September 02, 2019, 01:28:51 PM
can it be taller than the smartzone
also ban flatmotors tbh otherwise its gonna be the only motor anybody should use even for drive
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 02, 2019, 01:46:05 PM
can it be taller than the smartzone
Multiple people have suggested that the smartzone itself is too small for some weapon types. Would stacking 2 smartzones on top of each other provide a large enough space?

Also i received this comment
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Yes this is allowed. As long as the bot fits within the smartzone in some way then it will be accepted
Title: Re: Micro Machines [DISCUSSION]
Post by: NickyDustyOwl on September 02, 2019, 02:06:00 PM
So dumb question, Does just the chassis itself need to be in the smartzone or does everything including wheels, weapons and wedges need to be in the smartzone?
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 02, 2019, 05:54:38 PM
So dumb question, Does just the chassis itself need to be in the smartzone or does everything including wheels, weapons and wedges need to be in the smartzone?

Everything has to be within the smartzone.

Also sum changes just made
-Fast flatmotors are banned
-the vertical height has increased to two smartzones high
-the smartzone size has changed to medium rather than medium long
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 02, 2019, 09:10:03 PM
Final changes
-The arena will be the trauma pit
-I'll leave it at 16 entries and if more want to participate then it'll open up to 32

If anyone has any questions or suggestions now would be the time to post or @ me about them because otherwise this will go into signups
Title: Re: Micro Machines [DISCUSSION]
Post by: NickyDustyOwl on September 02, 2019, 09:11:05 PM
Final changes
-The arena will be the trauma pit
-I'll leave it at 16 entries and if more want to participate then it'll open up to 32

If anyone has any questions or suggestions now would be the time to post them because otherwise this will go into signups
Good Arena Choice
Title: Re: Micro Machines [DISCUSSION]
Post by: RedAce on September 02, 2019, 09:14:56 PM
Y'know, this is actually kinda a cool idea, even if at most I might just make a billet HW within the smart zone limit anyway.
Title: Re: Micro Machines [DISCUSSION]
Post by: 090901 on September 02, 2019, 10:54:22 PM
can it be taller than the smartzone
Multiple people have suggested that the smartzone itself is too small for some weapon types. Would stacking 2 smartzones on top of each other provide a large enough space?

Also i received this comment
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Yes this is allowed. As long as the bot fits within the smartzone in some way then it will be accepted
You could always just make a custom smartzone to the size you want it to be then, and also remove the additional APS so someone could place it down and then build with it. If you need help doing it me or someone else could help ya out.

also wtf nicky don't steal redaces avatar
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 03, 2019, 03:17:21 PM
You could always just make a custom smartzone to the size you want it to be then, and also remove the additional APS so someone could place it down and then build with it. If you need help doing it me or someone else could help ya out.

Holy sh**. This would help a ton on the builders end and on my end with checking bots.
Also yea i have no idea how to adjust the size of smartzones or change APs so I would definitely need the help of one of you epic gamers out there  :dance:
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 11, 2019, 10:49:37 PM
Just updated the rules to allow 32 bots
Title: Re: Micro Machines [DISCUSSION]
Post by: kix on September 12, 2019, 02:00:42 AM
Bruh can i make a bot that fits in 2 smart zones next to each other mr. 8 bean man?
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 12, 2019, 03:20:38 PM
Bruh can i make a bot that fits in 2 smart zones next to each other mr. 8 bean man?

bro thats literally bigger than purple nurple
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

aka no

but if you desperately want to make a wideboi you can build it so that it contracts into the smartzone with a piston or something and then extends when the match begins
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 14, 2019, 11:16:52 PM
Thanks to the epic gamer power of 09090900909091 there's now a custom smartzone that is already two tall. (download link is above)

And with that i think we're finally ready for signups.
Title: Re: Micro Machines [DISCUSSION]
Post by: Gulden on September 15, 2019, 10:24:00 AM
[ This attachment cannot be displayed inline in 'Print Page' view ]  

GENERAL RULES
-DSL IRL
-32 entries
-Double Elim Bracket
-Trauma Pit

BUILDING RULES

-There is NO WEIGHT LIMIT
-the catch? your bot must fit within the custom smartzone
(the download for it is here)  [ This attachment cannot be displayed inline in 'Print Page' view ]  
-pixel chassis and bfe is allowed
-steel 10 armor is not allowed
-A bot that utilizes servos or a beta not powered by bursts will be accepted only if it is already AI'd
-locked npcs, colored bars beaters and typhoons, and other skinned components are allowed
-I retain the right to reject any bot for any reason
-One bot per person unless the entry limit cannot be reached where it will be opened up to two per
-multibots are allowed but you must send a version that has both halves connected to ensure they both fit inside the smartzone
-only cheatbot2 components allowed are hworf blades, overkill servos, and slow flatmotors
-no sns or thwackbots
-no fast flatmotors

FIGHT RULES
-3 min fight
-If a robot has all of its wheels removed then it will be considered knocked out
-A manual countdown will be initiated if a bot cannot show controlled movement for more than 20 seconds
We have a sign-ups topic here.  Good luck folks.
Title: Re: Micro Machines [DISCUSSION]
Post by: 8bean on September 15, 2019, 01:40:03 PM
code red accepted
Title: Re: Micro Machines [SIGNUPS]
Post by: Jaydee99 on September 15, 2019, 02:51:03 PM
I sent my entry today
Title: Re: Micro Machines [SIGNUPS]
Post by: NickyDustyOwl on September 15, 2019, 03:57:28 PM
This is going to be hard, lets give it a shot
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 15, 2019, 06:01:12 PM
jaydee's entry rejected for batt/motor/burst clipping
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 15, 2019, 06:31:23 PM
Ok so it has been brought to my attention now that there was no limit set on weapons or bursts. In order to prevent all hell from breaking loose I propose a solution:

If bots are efficiently made then given the size of the smartzone, their weight should end up being somewhere around an underweight SHW.
with this in mind I believe the burst limit should be set at 2 betas and 3 for the other types.
As for typhoon teeth, the limit would be set at 4lg 6sm for verts and 6lg 8sm for horizontals.
Other weapon types i would judge on a case to case basis but just dont be ridiculous.

What do you guys think?
Title: Re: Micro Machines [SIGNUPS]
Post by: Jaydee99 on September 15, 2019, 06:38:39 PM
Am I missing something here?
The tournament is called Micro Machines, why build superheavyweoghts for this


Also isnt an underweight SHW just a heavyweight?
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 15, 2019, 07:11:43 PM
Am I missing something here?
The tournament is called Micro Machines, why build superheavyweoghts for this
its micro machines because of the build size. there is no weight limit so if built compactly the weight can almost reach SHW

Also isnt an underweight SHW just a heavyweight?
no. if your bot its 800.1kg then it is no longer considered a HW its now considered an extremely underweight SHW
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 15, 2019, 09:04:37 PM
Updated the rules to include the burst and weapon rules

Hard Bot's bot received
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 16, 2019, 02:36:42 PM
Kelimpel's bot accepted
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 18, 2019, 02:14:15 PM
nicky accepted
hard bot accepted
mr matthews rejected for being too big for the smartzone
sorry for the delay guys. something really serious just happened to me and my family so i dont know if or when this will be back on track
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 22, 2019, 03:02:40 PM
the deed is done and the day has passed. this tournament will continue so please feel free to send bots again, thank you all for your patience
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 27, 2019, 01:07:34 PM
bajur accepted and AI'd
Title: Re: Micro Machines [SIGNUPS]
Post by: CodeSilver23 on September 27, 2019, 01:34:11 PM
I have two questions:
1) Does the weapon have to be fully within the smartzone, or is it allowed to stick out slightly?
2) What and where are the Flat Motors?
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 27, 2019, 02:19:45 PM
I have two questions:
1) Does the weapon have to be fully within the smartzone, or is it allowed to stick out slightly?
2) What and where are the Flat Motors?

1) Yes, nothing can be sticking out of the smartzone. But there is an exception: (i dont really know how to explain this accurately with words so i included some pics)

lets say ive got my robot here that i want to enter into micro machines
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

it originally had a mech disc but it was rejected because no matter how it spun, it was always outside the smartzone
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

however, when i put the bar on it, it was accepted because when its spun 90 degrees it fits inside
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

2) They are banned in this tournament but ill explain them to you anyways. Flatmotors are super small and powerful weapon motors that are typically used on drums. You can access them via the cheatbot2 menu by naming your robot cheatbot2 and pressing enter. Then scroll all the way over on the motors tab and voila.
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 29, 2019, 12:38:34 PM
MrMatthews Accepted and AI'd

with this signups are almost 1/4 of the way filled. keep em coming!
Title: Re: Micro Machines [SIGNUPS]
Post by: Badger on September 29, 2019, 07:02:35 PM
Just sayin I think a 32 entry bracket is looking a lil ambitious :dumb)
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 29, 2019, 08:50:15 PM
Just sayin I think a 32 entry bracket is looking a lil ambitious :dumb)
Yea, the initial reasoning behind 32 was because I didn't want a situation like my last tournament where multiple people all wanted the last slot. The more I look at it though, the less I see this even reaching 16 individual entrants.

I'm going to give it until Saturday. If this can't reach 16 entrants by then I'll change it down to 16 entries max and open it up for people to send seconds.
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on September 29, 2019, 09:35:59 PM
RedAce's entry accepted
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 05, 2019, 10:26:40 AM
The Skeptic's entry accepted and AI'd

Remember that the end of today is when signups drop down to 16 entrants so now may be your last chance to send bots my way!
Title: Re: Micro Machines [SIGNUPS]
Post by: Badger on October 05, 2019, 12:48:38 PM
Honestly I'd just drop it down to 8/12
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 06, 2019, 11:14:10 AM
Honestly I'd just drop it down to 8/12
Honestly based on how slow entries have been going I think im gonna go with this

so yeah the entry number has been down to 12 and seconds are allowed to be sent now!
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 06, 2019, 03:01:05 PM
code red accepted
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 07, 2019, 02:36:49 PM
sickle and kelimpel accepted

with this only ONE SPOT REMAINS
Title: Re: Micro Machines [SIGNUPS]
Post by: 090901 on October 07, 2019, 04:14:47 PM
get ready to get nae nae'd my dudes  :gunz:
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 07, 2019, 07:52:04 PM
just got an influx inquiries about entering so i decided to bump it back up to 16 entrants

09 rejected for tooth spam
sephy rejected for flatmotor use
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 08, 2019, 02:32:45 PM
09 accepted
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 09, 2019, 07:58:34 PM
jaydee accepted
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 13, 2019, 07:11:53 PM
hop rejected for using flats
Title: Re: Micro Machines [SIGNUPS]
Post by: NickyDustyOwl on October 13, 2019, 10:04:51 PM
hop rejected for using flats
You shouldnt be surprised.  heck
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 16, 2019, 05:39:37 PM
Hop accepted

One spot left bois
Title: Re: Micro Machines [SIGNUPS]
Post by: 8bean on October 17, 2019, 02:43:56 PM
cringey accepted and bajur accepted

and with this signups are now closed