Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - CodeSilver23

Pages: 1 2 3 4 5 6 [7] 8 9 10 11 12 13 14 ... 28
121
Game Development / Re: Combat robotics roll & write game: RoboFray
« on: February 19, 2020, 09:56:29 AM »
I really like the idea of having a Robot Combat board/card game out there. The concept that you came up with has some potential, but I personally feel like it's a bit too complicated, and the robots that are on the cards aren't visually appealing. Overall, I feel that if you rework and simplify the steps, and maybe have cards of parts that are randomly drawn with unique stats for each part instead of drawing it yourself, I think you'll have a game that might appeal to a more wide-spread audience.

122
Tournaments / Re: SvL Season 2 (Signups open!!!)
« on: February 17, 2020, 10:49:56 AM »
Ok. Just to compare, here is my rep of last rites:
 [ Quoting of attachment images from other messages is not allowed ]
and here is shin splitter(the actual robot):
 [ Quoting of attachment images from other messages is not allowed ]
EDIT: Are these different enough? My rep of shin splitter will have a hollow bar and different supports.
Considering they’re both reps, I guess I can allow it. I’ll also probably assist you with detailing if the need be.

123
Tournaments / Re: SvL Season 2 (Signups open!!!)
« on: February 17, 2020, 10:42:14 AM »
Knowing that ive been pulled, im going to enter RRoD2 (doesn't exist), Last Rites from my showcase, and a nonexistent Shin Splitter(last rites reskinned with different supports and a new weapon bar). Ill probably think of more.
As long as they are submitted within the next 2 days, and if they are detailed, I will most likely accept them. I would recommend that you enter your triple spinner bot from your showcase, as I think that’s your most original design by far.
OK. Ill enter mindblown. Even if last rites and shin splitter are pretty much the same robot, can i still enter both?
As long as you make them look different enough.

124
Tournaments / Re: SvL Season 2 (Signups open!!!)
« on: February 17, 2020, 10:33:13 AM »
sh** i should enter Craplectric JR
Is Crappy Jr a lightweight?

125
Tournaments / Re: SvL Season 2 (Signups open!!!)
« on: February 17, 2020, 10:32:44 AM »
Knowing that ive been pulled, im going to enter RRoD2 (doesn't exist), Last Rites from my showcase, and a nonexistent Shin Splitter(last rites reskinned with different supports and a new weapon bar). Ill probably think of more.
As long as they are submitted within the next 2 days, and if they are detailed, I will most likely accept them. I would recommend that you enter your triple spinner bot from your showcase, as I think that’s your most original design by far.

126
Outside of the issue with the 30-400’s, the only other problems I’ve seen is when you go into a fight in the test arena, it immediately starts instead of prompting you to press a button when you’re ready. Also, I feel like the axle for the pancake etek should be a lot shorter, as the current length of it kinda defeats its purpose. The last nitpick I have is that the rims weigh nearly nothing, yet the tires get really heavy. If we could adjust the thickness of both, that’d be great.
Overall, this build is amazing, but it’s improvements have been greatly overshadowed by the incompatibility of bots in previous builds.

127

My apologies to anyone caught in the middle.  This coming build will break anything you have created using the A40-300 or F30-400 with the 15February2020 build.

PS -  I fixed the mass on the ME0708.  I have no idea what happened, but it suddenly became a 35 kg motor. :)
Yay so my etek thwack will survive AND be in the correct weight class!

128
Would it be possible to release the Feb 5 build again but with the Motor gyro fix as the only change?

Not really.  This build has a ton of commits and affected hundreds of lines of code and many hours worth of assets.  The new build would be done specifically to address legacy compatibility.  It might take a few days.
Aight. How long would it take to fix the 30-400’s for the new build? Contemplating whether i should fix all the entries or just wait it out.

129
Ugh.  It kills me to say this, but there is a way to reset the motors back to a similar configuration we had before, hiding them in the process.  It won’t be perfect though.  Alignment will be off.  Attachment points won’t be in the exact same spots.

But there is a way to make it happen.  I just hate it because it will become a legacy problem that will never go away.

Is it worth doing if the motors don’t go exactly back to the way they were before?
It’s better than our current predicament. I’d feel much better doing minor adjustments on 100 bots than doing major adjustments on 100 bots.

130
Would it be possible to release the Feb 5 build again but with the Motor gyro fix as the only change?

131
From what I'm seeing, The Ampflow 30-400's are severely broken, the 40-300's are fine, and the Motoenergy spins the other way now, which is fine, but it's WAY too heavy now. Thankfully all SvL have the same issue, which is the 30-400's, so fixing that should fix all of them.

132
Hopefully all SvL entrants are safe...

Oh man!  I'm so sorry! Eep!

 :embarr
Maybe you could create a build with the bugfixes and everything but with the old meshes
I mean, if someone wants to make that happen, I’m all for it. I’d probably need to talk to Kupa first though.

133
Hopefully all SvL entrants are safe...

134
The thing is if you are going to fix it, i do not want to resize stuff then

What sort of things are getting messed up?  Can you see a pattern to it?

Someone correct me if I’m wrong. It seems to be the 3 non-hollow components added in the previous update; Hexagon/Triangle/The Other One. They all had bizarre base sizes (around 11.0 X/Y/Z) if these have been reset to the same as the rest (1.0) then that would explain why it’s stretched the components out.
I can confirm that. The scaling for the hex, tri, and Octo cylinders were along the lines of 11.5, 5, 11.5 in the previous build.

135
Also, for those who don't know what I'm talking about, here is a basic visual:


My idea didn't work, so cjbruce please fix this.

136
Robot Rumble 2.0 / Re: Robot Rumble Community Replica Pack (WIP)
« on: February 13, 2020, 06:25:30 PM »
Only not useful because no one uses at and used the RA2 replica thread instead ?¿?


Anyway excited to try out the RR2 robots
Nobody used it because nobody gave two ****s about it lmao.

137
I think I might have come up with a potential solution for the motor gyro phenomena. Won’t be able to test it until tonight, so I’ll let you guys know then.

138
Showcases / Re: Minthemad's RR2 Showcase
« on: February 11, 2020, 09:54:51 AM »
Wow... Just... Wow.


Only critique would be that Supernova's disc looks a bit thin. Other than that, they're awesome!

139
Tournaments / Re: SvL Season 2 (Signups open!!!)
« on: February 11, 2020, 07:01:07 AM »
Double post :/


Can I enter an updated version of RRoD? The current version’s drive is too powerful.
Yeah go ahead!

140
Showcases / Re: Arcane's RR2 Creations
« on: February 10, 2020, 06:20:40 PM »
Yeah please don’t spam stuff, lightning. One gets the point across just fine.

Arcane you have amazed me yet again.

Pages: 1 2 3 4 5 6 [7] 8 9 10 11 12 13 14 ... 28