Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Jon144

Pages: [1]
1
Stock Showcases / Re: Jon144's Skunkworks [Stock]
« on: September 14, 2018, 11:39:46 AM »
He never intended his bot to be competitive.
Wanted to make something replica-esque of tombstone from battlebots.

That said, it looks great for what it's supposed to be. You could use 2 20cms instead of a T connector on each side of the weapon housing so the 120 cms are more flush against the chassis.

Exactly! A 36 spinner properly optimized looks hideous to me. Was looking to make something that both looked cool and had a shot at killing a good percentage of other stock bots.
Could have used 2 snappers instead with 2ztechs each with the drive motors attached as well but the end product is really off the mark. A 36 spinner would need counter-rotation to work which doesn't fit the tombstone thing.

At least I double-stacked two nien-volts and tripple stacked iron spikes. Although I did it the inefficient way with 3 extenders because that better fit the aesthetic I was shooting for.

I also tried using extenders instead of the T connectors but couldn't find a way to keep them from colliding with other parts no matter how I rotated them. Also this could have caused the bot to pitch up in the air and high center itself, the T connector's smaller profile allowed the front extenders to sit more plush with the chassis. The angle it sits is pretty important for its ability to knock off wedges in one hit like it did to RPB, hence the giant wheels xD.

Thanks for the love and feedback for a bot that's some sort of hybrid between style and lethality. One day i'll try to make something purely for competition.

Problem is that most people have already discovered the deadliest and efficient ways to build a bot with this game; I like to try making stuff that's still unique which often means not being the most efficient.

P.S Your CAUTION NINE VOLTS thingy says nein volts. In German nein means no. So you have a no volt battery.

First one to discover my meme! (Originally tried "high volt") shrunk down so much, it looks like nein volt at certain angles, which I laughed hysterically at.

German scientists power my robots using experimental zero volt batteries. Its a new design that most people on the forums are going to scramble to replicate.


2
Stock Showcases / Re: Jon144's Skunkworks [Stock]
« on: September 13, 2018, 06:47:02 PM »
Another project of mine recently... Flashpoint



Wanted to make something replica-esque of tombstone from battlebots. Ended up with this monstrosity...

It's really just a simple horizontal spinner with 27 iron spikes distributed between 3 clockwise spinning z-techs. There's certainly more efficient ways of approaching this design but i'm happy with the finished result.

Even though it was a for fun project it still hits pretty hard since all of its motors spin the same way. (Which makes it a real paint to control!)

Weight: 799.8 lbs
Armor: DSA

 
Flash2.png

 
Flash3.png

3
Stock Showcases / Re: Jon144's Skunkworks [Stock]
« on: June 23, 2018, 10:48:05 AM »
That's the funny thing, it only happens with certain robots. Against most opponents its fine and behaves perfectly stable, but if it faces another opponent with many motors it loses stability as soon as it spins up. Its not a universal thing at all. But I will take a look. It actually seems less of a case in havoking and more-so the motors behave like they have extra torque, flipping the robot as soon as they start spinning. But again, for some reason this only happens against certain opponents. I will take a look at AGoD, thanks.

Edit: I just checked and all of the hitboxes look perfectly fine. It just seems like another silly part of the physics engine. This problem also only happens on certain maps, for instance the robot instantly flips itself on starcore arena, but in the default box arena it sits on the ground perfectly stable.  :really_makes_you_think:

 
ZdDjfpl.png

4
Stock Showcases / Re: Jon144's Skunkworks [Stock]
« on: June 23, 2018, 01:45:33 AM »
You're both right, was working with the extenders earlier today and decided it just wasnt worth it for the time being given I might replace a bunch with 140cm rectangular extenders anyways. As a matter of fact this thing can even get under rabid pit bull... If it wasnt for the fact it likes to havok itself against it for some reason, flying out of control as soon as the match starts 2/3 times. Will try to get more vids out once I polish it.

5
Stock Showcases / Re: Jon144's Skunkworks [Stock]
« on: June 23, 2018, 12:50:36 AM »
Working more on refining my stock design.
Strontium-90 is the codename given to my new bot. Basically a cleaner continuation of free shipping.
Keeps its 4x Ztech 12 iron spike weapon loadout, the difference being a more efficient use of chassis space/weight and the addition of wedges that happen to be more effective than expected for this sort of design.

I still wouldn't call this a fantastic competitive bot, buts its still vicious against most starcore bots and looks menacing. I'll need to give these extenderbot vertical spinners a rest soon, but ive just started playing with the 1.4 parts again and might have to do another redesign before I call it done. I can make it more efficient yet. I just wanted something that looked nice and had the chance to kill stuff. methinks I succeeded!

(No CF in sight)

 
vUbZVM9.png

 
UMSMj8T.png

 
PJACB3W.png

 
82On3tk.png

6
Stock Showcases / Re: Pip's Stock Stuff
« on: June 20, 2018, 08:27:28 PM »
There's a hidden 140 cm square extender that only weighs 5 kg.
Wow! Thanks.

Are those usually legal?

7
Stock Showcases / Re: Pip's Stock Stuff
« on: June 20, 2018, 08:00:08 PM »
"Digitiser" is a swell name, I'd also use rads if you can do fit them well.

If nothing else, Digitiser is as aesthetic as ****...

Especially in how you built those extenders for the wedge. Maybe not the most weight efficient, but why not if you have some spare in the bank.

But they actually are more efficient. They're 5kg beta-extenders enabled in stock V1.4

Ah, can you enlighten me on this? I'm playing 1.2 stock and the metal extenders have the same HP as the others with more weight. Should check out 1.4

8
Stock Showcases / Re: Pip's Stock Stuff
« on: June 20, 2018, 05:28:29 PM »
If nothing else, Digitiser is as aesthetic as ****...

Especially in how you built those extenders for the wedge. Maybe not the most weight efficient, but why not if you have some spare in the bank.

 :mrgreen:

9
Stock Showcases / Re: Jon144's Skunkworks
« on: June 20, 2018, 01:24:03 PM »
It's a really cool looking design, but in terms of stock, I'd recommend not using RA2CF as it's banned in almost every tournament. It would be good if we could see internals for things like batt power. Extenders are also pretty fragile, maybe go with more of a chassis based build instead of an extenderbot? If you really like extenderbots/CF, I'd recommend taking a look at DSL 2.2 (https://gametechmods.com/forums/downloads/?sa=view;down=262) and dragonsteincole's IRL packs (https://gametechmods.com/forums/modifications/irl-components-pack-four-discussion/). Welcome to GTM, hope to see you around!
Yep, Its pretty gimmicky as an extenderbot but if any other robot gets around it... game over anyways. Obviously, it was built more for absolute derp factor rather than real competition. RA2CF is an amazing mod, but I wish he made a version that only eliminated the rule of 7; a very unrealistic feature. But being able to stack stuff inside of each-other with so much impunity is silly.

As a matter of fact, it was based off of a 100% stock extenderbot named free shipping.

The obvious difference being 4 unchained Ztechs which still dish out some good damage since they get up to speed faster. Otherwise, it's pretty unstable and gimmicky. At least it's totally stock.
Might need to revisit it too, with some more time I could probably get this weapon setup competitive with a stock design.

free1.png

free2.png

free3.png

10
Stock Showcases / Jon144's Skunkworks [Stock]
« on: June 20, 2018, 01:08:21 PM »
Hello all, I've been a long time lurker and bot builder. I've decided its finally time to share my creations with the public.

Here's a showcase of some of my projects.

Stock 1.4
---------------
Flashpoint:

Stock RA2CF
---------------
Critical Mass:

Pages: [1]