Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - TommyProductionsInc

Pages: [1] 2 3 4 5 6 7 8 ... 75
Custom Components Showcase / Re: Pay Tribute With Replicas
« on: December 10, 2018, 09:37:17 PM »
Chrome Fly.  I know that it's a bit too wide, but I was so far along with this build, that I decided I'd rather just go with it.
  [ You are not allowed to view attachments ]
Doesn't seem too wide to me. I think you did a fine job.

DSL TC Showcases / Re: dootIRL (Apotheosis)
« on: December 09, 2018, 12:48:36 PM »
I've died! Or have I?
 [ You are not allowed to view attachments ]  

Here is Apotheosis. A Dual VS with a brutal design made to look sleek, yet jagged at the same time. I went into this design kinda worried, but I ended up feeling really ****in' happy about this 'bot in the end. If only extenderbots weren't so fragile...

This looks incredible!

DSL TC Showcases / Re: TheRoboteer's Hit and Miss DSL Showcase
« on: December 06, 2018, 09:12:24 PM »
Wanted to build a kinda bucket scoop lifter thing. This is the result. Was supposed to be 4WD but I had to drop it because it was hugely overweight/ Tried to go for a unique chassis shape. I think I did okay but it came out a bit messy. Bucket is powered by a large VDMA while drive is 2 TWMRs. Bucket is all titanium while the front is steel and everything else is Alu. No srimech and can't self right so it's screwed if it gets flipped.

  [ You are not allowed to view attachments ]
It looks like it has cat ears. Is this intentional?

DSL TC Showcases / Re: Sausagebots!!!
« on: December 06, 2018, 03:34:07 PM »
(Image removed from quote.)
Raging Vert - Not terror wheel edition
(Image removed from quote.)
El Toro! -you get the inspiration
(Image removed from quote.)
Poison - Pain to load, npc's on spring axles so it bounces like Hypershock
(Image removed from quote.)
Mouser - :heck:

You should TOTALLY post that on our replicas thread!

Custom Components Showcase / Re: Pay Tribute With Replicas
« on: November 28, 2018, 06:05:31 PM »
the bars are a bunch of dsl bars attached together. its not one component.

resetti basically builds with whatever components look best for the bot he's trying to build. it's not uncommon to see him use stock, dsl and ironforge components on the same bot.
Yup. And his components folder is a complete and utter clusterf**k of messed up custom components, which is why he can't share his replicas.

That's why I stopped making replicas with custom parts. Too much of a pain in the ass.

Custom Components Showcase / Re: Pay Tribute With Replicas
« on: November 23, 2018, 10:49:21 PM »
Double Dutch
 [ You are not allowed to view attachments ]

DSL TC Showcases / Re: Sausagebots!!!
« on: November 21, 2018, 08:17:03 PM »
I love the Spectre lookalike.

Custom Components Showcase / Re: Pay Tribute With Replicas
« on: November 19, 2018, 04:41:03 PM »
Resetti's Yeti:
  [ You are not allowed to view attachments ]
Resetti's Yeti, eating spaghetti in the Serengeti:

DSL TC Showcases / Re: TommyProductionsInc DSL Showcase
« on: November 17, 2018, 05:18:19 PM »
A like? That'll do.

Here's another bot for the series, a callback to one of my most successful creations, Metallicus!

"It's the top dog of the tournament. The DEADLIEST robot we've ever seen. It's METALLICUS! Designed, built, and driven by millionaire playboy Toby Keith, he's the son of the CEO of the robotics company that funded this sport! He already won last tournament, now lets see if he can dominate again!"

DSL TC Showcases / Re: Thyrus`Showcase
« on: November 13, 2018, 09:42:34 AM »
 [ You are not allowed to view attachments ]
I love this combination of colors. Fancy weird flipper too.

DSL TC Showcases / Re: TheRoboteer's Hit and Miss DSL Showcase
« on: November 13, 2018, 09:41:22 AM »
Aforementioned cleanup done. I think it looks much better now. Certainly cleaner at least

  [ You are not allowed to view attachments ]
That looks better.

DSL TC Showcases / Re: TheRoboteer's Hit and Miss DSL Showcase
« on: November 12, 2018, 08:06:14 PM »
I'm not sure about Usurper either, but Cicada keeps getting better and better!

Custom Components Showcase / Re: Pay Tribute With Replicas
« on: November 08, 2018, 08:58:55 PM »
Dude stop using stock decals, the least you could do is put a little effort to align everything
Have you tried to align stock decals before?

Have you tried a custom skin?

Lets be reasonable here, Photoshop isn't an easy skill to learn, nor is it cheap software either.
I use MSPaint and my stuff looks WAAAY better than any decal-covered bot.

sow(2018 version).

I'm not normally the kind of guy to make comments like this...but compared to your previous replicas (especially your previous S.O.W.), I don't believe you've made this: I'm pretty sure this it the one from the BB18 pack made by HarleysCupboard.
- Wedge/wheels are different
- Tribar is different but not by much.
- Chassis/decals are exactly the same.
  [ You are not allowed to view attachments ]  
Please, feel free to correct me. I'm just looking out for HarleysCupboard here. :smile:
When did he post his previous SOW.

If this is what I think it is, is this the first case of replica theft this forum has ever seen?

Discussion / Re: RA2 Wiki
« on: October 30, 2018, 05:13:48 PM »
If my Real Robotics AI pack hasn't been that recognizable (it's in downloads), then more need to try it out.

What if some people don't want to?

Custom Components Showcase / Re: Pay Tribute With Replicas
« on: October 28, 2018, 04:20:46 AM »

I can only get so erect.

DSL TC Showcases / Re: Mazakari's IRL Designs
« on: October 23, 2018, 10:54:26 AM »
Absolutely awesome!

Off-Topic Discussion / Re: Tommy's Lego Bots.
« on: October 22, 2018, 01:42:18 PM »
Ok, so I used my chromebooks webcam to take these pictures.

Here's a WIP of the revisions of the original house robots. This time, they're customized in design to be more combat effective, rather than more accurate.
First up is Shunt:

Shunt is gonna get new bigger horns at the sides, that way when he's flipped, he'll only land directly on his head, from which he'll be able to self-right, with his new, GIGANTIC pickaxe!

Next up, Matilda. Matilda will be the first bot in Bot Wars history to use a METAL weapon.An old rusty bar I found in the middle of the street. He proportions will be changed to accommodate for her literal big ass spinner. Plus her tusks have been reverted to their more classic setup.

Next up, Sgt. Bash!

The first house robot to be revised, Bash is simply gonna be bigger, badder, and brutaler. His crushing beak is bigger, and he's getting a longer flame-thrower. I'm also gonna make him look more like a submarine instead of an aircraft carrier, that way he's less vulnerable to vertical spinners. He won't look as cool, but he'll be harder to damage.
Next, Dead Metal!

New bionicle claws and a study chassis for starters. Later, I'll add his saw mechanism, and for the sake of simplicity I'll be using the old system Dead Metal used in Robot Wars series 1 and 2. It'll be modified so that he can even self-right.
Lastly for today, Sir Killalot!

He's gonna be MUCH heavier this time around. His arms will enable him to self-right, assuming he can even be flipped anymore. He's also got articulated elbow joints, just like his real life counterpart! He's also using more bionicle parts for decoration, as well as a butt-load of technic parts for durability.

Next time, I'll show off the other 4 house robot in their current WIP states!

DSL TC Showcases / Re: TheRoboteer's Hit and Miss DSL Showcase
« on: October 22, 2018, 01:22:37 PM »

Real Robotics Discussion / Re: WTF Moments in Robot Combat
« on: October 20, 2018, 11:37:13 PM »
So...this happened.....
Holy sh** dude.

Also, I didn't know you had a GTM account Battlebotsboy! You're the reason I downloaded RA2 in the first place!

Challenge Board / Re: superbomb122 vs TommyProductionsInc
« on: October 20, 2018, 10:13:15 AM »
Thanks Badger. GG Tommy.
Damn dude, good matches. I'll be sure to make my IRL bots more combat-worthy next time around.

Pages: [1] 2 3 4 5 6 7 8 ... 75