This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Pwnator
Pages: 1 2 3 [4] 5 6 7 8 9 10 11 ... 364
61
« on: August 10, 2018, 11:36:12 AM »
Yeah, that's pretty much the most you could get out of that snapper setup. Theoretically you could extend the front part of the chassis so you could jam in a tall caster but I'm not sure if it'll weigh more than 800.
62
« on: August 01, 2018, 08:33:45 PM »
SOILED IT
SOILED IT
SOILED IT
forreal tho the dsl disc is just much thicker compared to the square panel and i'm too lazy to pad the level of the cheese with hex plates
63
« on: August 01, 2018, 06:59:09 AM »
I just followed the sequence from here:
64
« on: July 31, 2018, 08:54:13 PM »
yuh Too lazy to use screenshots of it spitting hot fire because I'm terrible at editing out stuff close to the flames. 2WD NPCFs are absolutely garbage with Tornado wedges, and I couldn't find a clean way to use E-Tek drive nor Beta bursts. And I probably should have set it as a clamp rather than a hammer because it gets stuck in nearly single arena available. I was expecting stiff competition because the chassis is ridiculously easy to build on, but ¯\_(ツ)_/¯ Also, have a Krabby Patty which is a heavyweight for some reason both are on the exchange if y'all wanna dick around or something
65
« on: July 27, 2018, 01:02:07 PM »
How fat are the stacks to make the bot weigh more than a middleweight?
66
« on: July 27, 2018, 06:10:08 AM »
[ Quoting of attachment images from other messages is not allowed ] Building Rules:
-HW Stock 1.4
-No BFE/AAM/Hax Mode/etc.
-Ro7 break is allowed. All other uses of RA2CF are not
-Bots that have their drive designed to break off and SnS bots are banned. Multibots are also not allowed due to tournament seeding format.
-All robots must show controlled movement via at least two powered wheels
-AI parts/140cm extender/blue snapper/etc. are allowed
-Recolored components are allowed. If you use them, let me know which pack they're from. Do not recolor components yourself unless you've already made them available to the public.
-No cheatbot2
-After sending your robot to me, you may update it only once, and only before signups close.
Tournament Format:
-1v1 single elimination main bracket. Any bot that gets knocked out of the main bracket will still be able to compete in a losers round with the same format as Revolution 2, minus the lives system - it's just survive to the end (reminder on that system: two bots fight, the winner stays in to fight another bot, the winner of that stays in to fight another bot, etc until only one bot is left). The order the bots enter will be based on seeding. Here's a visual representation of the bracket:
[ Quoting of attachment images from other messages is not allowed ]
-Virus Bomb is allowed two entries if he wishes (from winning Revolution 2)
-Arena will be a reskinned DSL Blade Arena with the arena hazard toned down.
-3 min time limit, Bo3 matches in main bracket except for the final, which will be a Bo5
-Seeding will be done by randomly splitting the robots into 4 different 4-way rumbles. Depending on how they do in those initial rumbles, they will be placed into another rumble to determine their rank. Here's another picture of text to explain:
[ Quoting of attachment images from other messages is not allowed ]
Other:
-I can AI, but it is preferred that you do it yourself. That being said, no cheaty AIs. If I AI your bot, you may not complain unless I have made an obvious mistake.
-No meltybrain.py
-Signups will be for two weeks OR until 16 entries are filled.
-I may extend signup period by a week if needed, but do NOT count on this happening. If you are interested in this tournament, please enter as soon as you are able.
-I will be entering ONLY if all 16 spots are not filled by the end of two weeks, and I will compete with this:
[ Quoting of attachment images from other messages is not allowed ]
-PRIZE: This will probably be my last tournament, so I want to make it count for whoever wins.
The prize for first place is a $20 Steam gift card code! 2nd place will get a $5 steam code.
Moved to Signups. Rules cannot be changed past this point, and good luck with your tournament.
67
« on: July 21, 2018, 11:03:31 PM »
I wouldn't even be mad if you entered this in a future BOTM.
68
« on: July 19, 2018, 08:03:00 PM »
Don't know what's going on with the mini wheels. You could just swap them for shinies and you'll be able to upgrade the Z-teks to HPZs.
69
« on: July 17, 2018, 08:04:16 AM »
This looks like something superbot would build :thinking:
70
« on: July 13, 2018, 03:09:23 PM »
Wanted to build something new for one of the stock tournaments being discussed, so I tried to hit two birds with one stone and rebuilt another Starcore bot: Jabberwock - 8 plows and 4 brackets (who cares about weapons and batteries amirite). Instead of going all-in against HS like what I did to Jubjub Bird, I gave it some wedges because this is stock HW after all. There might be AGOD and I'm too lazy to verify but it kinda slides around all over the place and the wedges are probably garbage because there are 2 plows on each Snapper2. It also doesn't hit as hard as I would expect but I'm guessing that I could solve that with 3 blacks instead of 2. I'll rebuild this for sure if I can find the time for it.
71
« on: July 11, 2018, 09:40:59 PM »
lol badnik got baited
Unlocked the thread so the videos can be linked here.
72
« on: July 05, 2018, 11:56:09 PM »
Cleaned the thread a bit since the recent responses aren't quite related to Octopus Tree or RA3.
73
« on: July 02, 2018, 06:55:48 PM »
r e d b o i s
I guess you'll just have to upload the chassis to the exchange?
74
« on: July 02, 2018, 06:49:56 PM »
Any way you could squeeze in a column of extenders in the middle of the whole setup so the flipper doesn't intersect with the panels?
75
« on: June 30, 2018, 01:16:50 PM »
Of all the hybrid choices in the world, why this one? 
You clearly haven't seen this then: 
76
« on: June 26, 2018, 06:00:12 AM »
Fixed the poll.
77
« on: June 25, 2018, 04:14:17 AM »
It's a shame that Ro7 is preventing you from giving it better weapons. I don't like the empty space in the middle though (placing a single ramplate barely counts). You could try slimming down the chassis to a U-shape and see if you can at least put a plow on each side to dampen the gyro effects.
78
« on: June 24, 2018, 06:14:11 PM »
Probably to stack the batts?
Looks sweet. Reminds me of one of Sage's old bots (Stone Breaker I think). Is it invertible?
79
« on: June 19, 2018, 06:33:41 PM »
Do the arms even retract properly? 4 irons is already pushing it on a popup, so I don't see 5 on a hammer doing well.
That aside, the setup looks clean. I'd prefer 4 RAD spinners instead of the 2 HPZs you got there, but I'm not sure if there's enough weight even if you lighten the hammers.
These last 2 bots look great.
80
« on: May 25, 2018, 12:40:57 PM »
yeah that was it
I think that was a 4-snapper setup and I'll never have the patience to stack 2 pairs of snappers and 2 blacks. That and I'm not a fan of the 40cm reach w/ razors since it just barely outranges Little Darling and the like. But it's still symmetrical and pretty and hopefully stable so all hope is not lost.
Pages: 1 2 3 [4] 5 6 7 8 9 10 11 ... 364
|
Show Posts