Bumblebot? No, I don't like it. Me neither, 30 sec job.
Blade is good. Thanks, it's not Shreddar.
it appears to be the Judge's axe head^^^10 points to JoeBlo^^^
Some bots I made:Steel Avenger looks good. ;)
WARNING!
huge picture :x
yeah but later. first they have to be done.
Ok. I was just making sure.
T T
L
\____/
Ok. I was just making sure.
T T
L
\____/
are you kidding me? TLT!?...Thyrus: I think he just wanted to use it as a smiley and forgot that it means Theard Like This.I know, was just joking X)
Gaeza: You're not the only AI'er. ;)
I have a Killerhurtz weapon Component that we could use, unless Sonny wants to use his.
I didn't make it, I found it in my Components folder the other day.
Personally, I bet it's from the BattleBots AI pack.I didn't make it, I found it in my Components folder the other day.
Do you know which pack it's from?
If not, is it unCLF'd so that you can send the txt file and folder?
Personally, I bet it's from the BattleBots AI pack.
I like.Thanks Badnik. AO is also pretty good at self-righting using the axe.
you have to name the SZ "whipzone" as far asI know.
you have to name the SZ "whipzone" as far asI know. I like the Agent Orange replica too. How does it look with the Icepick instead of the one you use?Thanks Thyrus.
Agent Orange looks a bit discoloured. It looks a bit more orange than that. As for the replica itself, I like. :)I'm so glad people like my replica. I'll see what else I can put together between now and some other time.
ok.OK then. Do you think you could give me a link so I can, though?
Well can you make a tick on the finished Reps you made on the wiki so we can see what we still need?
@Joe: had you time for skinning Steel Avanger? Don`t want to hurry you, just asking.
@Joe: had you time for skinning Steel Avanger? Don`t want to hurry you, just asking.
Could someone else do Prizephita? I can't replicate the chassis >: (I'll have a try if you like.
name = Skirt hinge burst
dir = skirts
type = extenders
base = BurstMotor
model = skirtmaster.gmf
preview = hinge_preview.bmp
description = Hacked Skirt Hinge
master = motor
passthru = axle_collision
elecMaxInOutRate = -450
burst = 350 100 350
power = 5 150
sort = 23
standard = 1
styles = Default
Nope. :d
You posted them in the other thread - this is the rep showcase, you posted them in the discussion :POh right!
(http://i661.photobucket.com/albums/uu338/georgeabbers/screenshot_7.jpg)
(Big Brother Pic)
Ahem. Any improvements I need to make? Or is it perfect as it is?
thanks Joe. I`, not sure how I`m going to do it`s side, top and back.
Isn't there a Loose Angler or something in Wham's pack? You could use those instead of the angler extenders.
(http://i.imagehost.org/0059/a_5.png) (http://i.imagehost.org/view/0059/a_5)Nice! Although I would recommend seeing if you can get it the same shade of green as the original robot, and maybe skin the pieces of metal on the side to match.
Better, but I need to find a way to take the normals off the blade and give it more HP.
Also, 180 degree rotation, and a working shrimech.
Notepad works for that. If you want to get into more technical stuff Notepad+++Thanks. But what do I edit to get the results I want? All I see is this jargon-
Also nice replica.
DOUBLE-POSTFFFFFFFFFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I'll get others in.
Here's my attempt at Mortis-
(http://j.imagehost.org/0053/mortis.png) (http://j.imagehost.org/view/0053/mortis)
One thing I do need to know though is what program I should use to edit the stats on components (IE. Removing normals and upping HP).
but the beta disturbes me. can it be mad invisible?
Oh. Its in the CFZ. You need a CFZ decompiler. Go to https://gametechmods.com/forums/index.php?page=page276 (https://gametechmods.com/forums/index.php?page=page276) Click on LT_CFZ Decompiler. Decompile then edit. Or in the styles folder create a new one notepad file.OK, I've got the Decompiler, but where do I zip it to?
Edit: Talk to JoeBlo or Sonny_Ressiti if you still don't understand or I told you something wrong. I just read a tutorial on it and did alot of trial and error to figure out what I know.
Sorry, I know I can't do crap with that program.Decompile
set finished file name to blade2
Edit file
then recompile and save as blade2
Never mind
GF what do you need ? a stronger blade ? I will whip it up for you tomorrow night (is late at night right now)Yes, I need a blade that's stronger and does not have normals.
Oh, slim wheels would look better on that.
Does the ax go 180 degrees?It does :approve:
awesome stuffThank you Joe! Just let me know once you've done it so that I can put it onto Mortis v2 :approve:
I will get that new axe text done asap, then work on a new python for it.
Oh, anyone who needs a skirt hinge flipper, just paste the following into a text document, and save it in a DSL components folder.Code: [Select]name = Skirt hinge burst
dir = skirts
type = extenders
base = BurstMotor
model = skirtmaster.gmf
preview = hinge_preview.bmp
description = Hacked Skirt Hinge
master = motor
passthru = axle_collision
elecMaxInOutRate = -450
burst = 350 100 350
power = 5 150
sort = 23
standard = 1
styles = Default
Meh, I just thought I'd resurrect this topic again with an improved version of one of my reps. Here's Mortis v2-
(http://j.imagehost.org/0236/mortis2.png) (http://j.imagehost.org/view/0236/mortis2)
In address to the issues of the original (Too wide and large), I made this one longer and more closely shaped to the original. One thing that would really help though is if I can get a version of the small blade with no normals and increased power and HP.
Thanks for the comments VEVO.Meh, I just thought I'd resurrect this topic again with an improved version of one of my reps. Here's Mortis v2-
(http://j.imagehost.org/0236/mortis2.png) (http://j.imagehost.org/view/0236/mortis2)
In address to the issues of the original (Too wide and large), I made this one longer and more closely shaped to the original. One thing that would really help though is if I can get a version of the small blade with no normals and increased power and HP.
Yay my favourite all time bot, looks good GF93.
P.S. have you got a vid of it in action. I'd love to see it fighting, also does it's lifter get under its opponents, as ive seen some some vids of DSL lifter bots that cant get underneath
Goldenfox, do you want the blade to have the same stats apart from having no normals?
One thing that would really help though is if I can get a version of the small blade with no normals and increased power and HP.
How much more powerful? Same damage as a razor? More?More powerful than a razor would be great, thanks. I'd like it to give the impression it is doing major damage (Like it did in Series 2 to Oblivion and Matilda, for example) to opponents.
*Sighs*
Where's Joe when you need him? :approve:
since this pack isnt going to be released tomorrow I figured you could wait until I had the time
Sorry, I didn't realise you were that busy :embarr*Sighs*
Where's Joe when you need him? :approve:
incredibility busy doing lots of work for other people (not just on this forum)
since this pack isnt goign to be released tomorrow I figured you could wait until I had the time as I was going to make a new component all together (GMF and skin too)
but you shoudl try the judge axe head.. its really strong, losts of HP and looks good.
Make a new .txt then cause I think Judges hammer is a bit overpowered compared with the weapons of other reps.Personally, I think it'd work well the way it is. Remember that the competitor robots' armour wasn't so strong back then, and Mortis' tanto blade was still considered very powerful.
I can do that if you want.Thanks Gazea. Do you think you could possibly remove the normals from a small blade and increase its damage and HP?
Many of us can. I can do it without affecting the original one.Wow, so many people who can do it, but who to ask? If you can do that GK, please do = P
What exactly do you want doing? I need the specifics.OK, I'll need a blade that has-
And it's the 20cm stock blade you are referring to?Yes.
name = Mortis Blade
preview = blade_preview.bmp
dir = blade
model = blade1.gmf
type = weapons
base = Weapon
styles = Default
description = Mortis-purpose steel blade.
damagesounds = sounds\chorus_metal_tink.wav
decal = double_slash.tga 0 0 1 .5 .5 1
attachsound = sounds\cmp_generic.wav
concussion = 1
piercing = 3
standard = 1
fracture = 400
hitpoints = 5000
Your CT is out of date. :PNot any more :approve:
i finished Ultor but i send it to Joe Blo to get it skinnedMaybe I'll make Flipper in response. Emulating the Giant Hotdog on top might be a bit of a challenge though ;)
Wait... Purple Predator has a STATIC sawblade ?
(https://gametechmods.com/uploads/images/37799PP.JPG)*coughpage10cough*
Righto i only have one more question.I believe Wham has a link to it in his sig. Just find one of his posts, and it should be there.
Does anyone have a copy of Whamm's Front hinged flipper ?
I cant find it anywhere.
hmm must not apply to motors then?
@Joe - I did read the thread, but I never saw you're post about it. Can you quote it or something?
hmm must not apply to motors then?
anyway here.... (it will replace your old skirt unless you feel like renaming)
https://gametechmods.com/uploads/files/skirts.rar (https://gametechmods.com/uploads/files/skirts.rar)
I will see which of Resetti's released reps can go here.I am pretty sure Resetti has already gave those reps for the mod.
Why not modify the DSL Hypno chassis?That is what I will try.
Also I will try to make Ultor.That's going to be difficult to get the chassis shape without custom components. But all credit to you if you can make something kinda similar.
Also I updated the wikipage.
https://gametechmods.com/RA2wiki/index.php?title=Talk:Robot_Wars_Series_3_Mod (https://gametechmods.com/RA2wiki/index.php?title=Talk:Robot_Wars_Series_3_Mod)
What component did you use to make that dome? I thought it was a Supernova disc until I saw the angled sides. o_o
DPLooks good, Badnik! I like how you did the front weapon system.
done
(https://gametechmods.com/uploads/images/65961Challenger%202.PNG)
Couldn't find the Hworf bits so I used Ruiner wedges. Just barely a HW.
Next on my list is Crippler. Does anyone know what it says on the front?Have a nice day, If I remember correctly. One of the first RW fights I remember seeing, actually.
Will it be using Kheper.py?
DPThat looks fantastic, Badnik! Nice work! =D
done
(https://gametechmods.com/uploads/images/65961Challenger%202.PNG)
Couldn't find the Hworf bits so I used Ruiner wedges. Just barely a HW.
Here's CripplerLooks pretty good so far. A little bit small though, I think.
(https://gametechmods.com/uploads/images/50978Crippler.PNG)
Hypno-Disc is under construction as we speak. It destroyed Chaos 2 in less than 30 seconds.That reminded me, just out of interest, is there going to be a more powerfull version of chaos 2 in this?
But I need to find the Hypno-Disc frame then it will be ready.
Yes there will. Also I give up on Dominator
Anyone have any ideas how I can make the Crescent Moon on Crippler? I'm making good headway otherwise (it was easy after I was inspired by something Welsh).
(https://gametechmods.com/uploads/images/30243screenshot_36.png)Well done, I think that's impressive! :approve:
That any better? I added the bar and disc and it behaves like it should.
Ah, no, that's an optical illusion. I just didn't zoom in close enough, that's all. It's the same width of 5 flipper panels, and length of 9.^^^^
O hai thar Badnik. :gawe:First time I've seen that..MPM looks like it has an interesting weapon system ;)
http://website.lineone.net/~robotwars101/morepanda/pictures.html (http://website.lineone.net/~robotwars101/morepanda/pictures.html)
O hai thar Badnik. :gawe:I found these two bots on the site:
http://website.lineone.net/~robotwars101/morepanda/pictures.html (http://website.lineone.net/~robotwars101/morepanda/pictures.html)