gametechmods

Robot Arena => Showcases => Ironforge TC Showcases => Topic started by: Mr. AS on July 07, 2014, 01:56:45 PM

Title: Mr AS Ironforge showcase
Post by: Mr. AS on July 07, 2014, 01:56:45 PM

(http://i.imgur.com/9GDYmfh.jpg)

(http://i.imgur.com/AbiTW7Q.jpg)

Largest ninja star, Ti3, 3 pink batt edits battery things, big razors.

in before drowned out by stupid playground bullsh** and jonzu attentionwhoring

Title: Re: Mr AS Ironforge showcase
Post by: Lemonism on July 07, 2014, 02:00:07 PM

Looks pretty damn good to me, although the reach on the disk doesn't look great. Still, very cool.

Title: Re: Mr AS Ironforge showcase
Post by: MassimoV on July 07, 2014, 11:53:29 PM

Looks nice. Only problem is not invertible.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 12, 2014, 06:32:14 PM

Robots for 123's AI thing

(http://i.imgur.com/B1HeffP.jpg)
Please give team names, thanks.

(http://i.imgur.com/ut0z4a3.jpg)
You've seen this one before. It has noticepicks as ramming weapons now.

(http://i.imgur.com/eVsN8HG.jpg)
Has something like 4 or 5 notpinks and a single sheet on a hinge at the back. Does decently.

(http://i.imgur.com/gi8apWP.jpg)
Pretty much unstoppable in the combat arena. Need suggestions on what to put at the bottom, it currently has that default red X decal.

(http://i.imgur.com/VNdguK1.jpg)
Is stacking ballasts in stuff legal? I don't think it makes a huge difference.

(http://i.imgur.com/JB9a95F.jpg)
2fast

(http://i.imgur.com/ojhMn7o.jpg)
DUBYEW DUBYEW E SUUUPER SLAAAM

Title: Re: Mr AS Ironforge showcase
Post by: MassimoV on August 12, 2014, 10:38:53 PM

If someone showed me a picture of that HW HS and asked who built it, I'd immediately say AS.

Title: Re: Mr AS Ironforge showcase
Post by: Mecha on August 14, 2014, 09:19:02 AM

Love it.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on September 29, 2014, 08:35:49 PM

(http://i.imgur.com/PGXpnoF.jpg)

(http://i.imgur.com/izchSkt.jpg)

SHW with no ballast.

Ti 5, 10 of the largest Iron Spikes. That's 8000 DP total, AKA a ton of damage. Not counting the 4 extra spikes at the front, of course.

badadadada

Title: Re: Mr AS Ironforge showcase
Post by: cephalopod on October 01, 2014, 03:57:23 AM

Apart from the meh skin it looks great. I'm guessing I'm right to assume the static spikes don't get in the way of the pistons considering the massive length they have.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on November 02, 2014, 12:23:09 AM

(https://gametechmods.com/TournamentFiles/botm/2014/11/Mr%20AS_HE%20HAS%20NO%20STYLE%E2%80%A6OT%20HAS%20A%20FUNNY%20FACE.png)

FUG :-DDDD-DDD-DDDDD-DDDD

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on November 02, 2014, 03:00:49 AM

It's sh**ty and you know it.

Title: Re: Mr AS Ironforge showcase
Post by: Badnik96 on November 03, 2014, 01:09:05 PM

his body was not reggie

Title: Re: Mr AS Ironforge showcase
Post by: Jonzu95 on November 03, 2014, 04:01:32 PM

Quote from: Naryar on November 02, 2014, 03:00:49 AM

It's sh**ty and you know it.

omg swearing in main forum!!1!one!

Title: for fug's sake trov, resizing doesn't work with the X-mas theme, fix this plz
Post by: Mr. AS on December 30, 2014, 12:25:29 AM

(http://i.imgur.com/7qetKtb.png)

SHW's.

The center hammers on the right one see usage after the flimsy icepicks fall off. They're attached on separate BA's than the rest of the ramming weapons.

Title: Re: Mr AS Ironforge showcase
Post by: Philippa on December 30, 2014, 06:28:53 PM

Middle one looks the best.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on June 17, 2015, 10:18:45 PM

popup

(http://i.imgur.com/JrArYw5.png)

(http://i.imgur.com/36a5q5B.png)

ST10

599.9 - 4 ballasts = 399.9 kg

Title: Re: Mr AS Ironforge showcase
Post by: MassimoV on June 18, 2015, 12:07:29 AM

Jeez, nice reach.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 03, 2015, 08:40:14 PM

(http://i.imgur.com/RC7MP7V.png)

Red Zone team for redace's shin dig

LW - Scout
(http://i.imgur.com/SnXqSI6.png)
(http://i.imgur.com/BXe45TW.png)

MW - ALARM
(http://i.imgur.com/Y3NnRPy.png)
(http://i.imgur.com/pVeAp55.png)

HW - Sentinel
(http://i.imgur.com/wBG7y1Q.png)
(http://i.imgur.com/X5QFPUA.png)

AW - Sentry
(http://i.imgur.com/W57CF2z.png)
(http://i.imgur.com/xdmB4xt.png)

BW - INTRUDER (name and design ripped directly out of ASAI)
(http://i.imgur.com/okmh7gs.png)
(http://i.imgur.com/txERcRr.png)

SHW - Bomb Squad
(http://i.imgur.com/qTsK3Yi.png)
(http://i.imgur.com/IfAudP6.png)

Varying armors. Beta popups work well for causing damage and flipping. Names for the first 3 bots and the SHW are subject to change.

Title: Re: Mr AS Ironforge showcase
Post by: RedAce on August 03, 2015, 08:46:20 PM

These bots just look so clean and I love that. Nice work man. Send them when you're ready.

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on August 04, 2015, 01:41:58 AM

so is SHW ironforge 800 or 600 kg ? logically it'll be 600

i mean in stock a SHW is 50% of the weight of a HW, so it'll be 600 in ironforge, so where does that put 800kg ? the ironforge UHW class ?

is ironforge aw/bw really the same as stock aw/bw ? i think cruiserweight is unneccessary in ironforge tho

Title: Re: Mr AS Ironforge showcase
Post by: G.K. on August 04, 2015, 04:17:47 AM

Yeah SHW is 600 - AS is just using his free ballasts.

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on August 04, 2015, 05:27:50 AM

oh right the ballasts

Title: Re: Mr AS Ironforge showcase
Post by: Jakewilliamson on August 04, 2015, 07:54:44 AM

Quote from: Mr. AS on August 03, 2015, 08:40:14 PM

(http://i.imgur.com/RC7MP7V.png)

Red Zone team for redace's shin dig

LW - Scout
(http://i.imgur.com/SnXqSI6.png)
(http://i.imgur.com/BXe45TW.png)

MW - ALARM
(http://i.imgur.com/Y3NnRPy.png)
(http://i.imgur.com/pVeAp55.png)

HW - Sentinel
(http://i.imgur.com/wBG7y1Q.png)
(http://i.imgur.com/X5QFPUA.png)

AW - Sentry
(http://i.imgur.com/W57CF2z.png)
(http://i.imgur.com/xdmB4xt.png)

BW - INTRUDER (name and design ripped directly out of ASAI)
(http://i.imgur.com/okmh7gs.png)
(http://i.imgur.com/txERcRr.png)

SHW - Bomb Squad
(http://i.imgur.com/qTsK3Yi.png)
(http://i.imgur.com/IfAudP6.png)

Varying armors. Beta popups work well for causing damage and flipping. Names for the first 3 bots and the SHW are subject to change.

I love these very much, and I think the red zone team has word to us:

(https://gametechmods.com/uploads/images/2308red_zone.jpg)

''Where your bots will be after five seconds flat with ours. - Red Zone

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 06, 2015, 02:14:26 AM

(http://i.imgur.com/THQuIga.png)

HIGH VOLTAGE team for redace's shin dig

LW - Flapjax

(http://i.imgur.com/BSIX1nn.png)
(http://i.imgur.com/fWyvRq3.png)

LW beta popup. Does alright damage. Haven't tested it's OOTA capability since none of the stock arenas actually have OOTA zones other than the tabletops. Basically just a LW version of Sentinel and Bomb Squad.

MW - Slashatron

(http://i.imgur.com/XwNtAJR.png)
(http://i.imgur.com/74EgdGS.png)

MW popup. Nothing too special. Probably going to be renamed before it gets sent off.

HW - WIIIIIDE LOAD

(http://i.imgur.com/XCjiG7Y.png)
(http://i.imgur.com/yaPlPEV.png)
HW poker, HW version of Alarm. 5 hammers.

AW - Plug

(http://i.imgur.com/mT0V9af.png)
(http://i.imgur.com/HAJVimr.png)
Sentry with different weapons AW rammer.

BW - Socket

(http://i.imgur.com/7qIXfiQ.png)
(http://i.imgur.com/aggPKsD.png)
BW wedged rammer. It rams things and dies in 2 hits because it has PL1.

SHW - Nuclear Fusion

(http://i.imgur.com/PUJTmNu.png)
(http://i.imgur.com/jlPllpz.png)
OP ass SnS. These things just shut down any kind of wedge/gutripper in ironforge and are generally just way too strong. I don't actually know if stacking baseplate anchors in things is legal or not, but stacking multiextenders in things in DSL was legal, so I assume it is.

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on August 06, 2015, 05:33:14 AM

yeah, stacking baseplate anchors is totally legal.

also op tier rotation power pulsar klone

Title: Re: Mr AS Ironforge showcase
Post by: 090901 on August 06, 2015, 03:46:12 PM

I think you should at least make Flapjax a pure flipper.
Oh and I think a huge ass chassis wedge popup is more fitting for Backslash. Right now it just looks like the SHW and HW popup on the Red zone.
AND WHY ARENT YOU USING POLE SPIKES FOR WIDE LOAD MAN IT ISN'T SUPPOSED TO BE A HW VERSION OF ALARM!!!!!

Title: Re: Mr AS Ironforge showcase
Post by: Reier on August 06, 2015, 04:10:12 PM

agree with 09910239102930123901293
this wide load really isnt even wide brah :L

Title: Re: Mr AS Ironforge showcase
Post by: RedAce on August 06, 2015, 07:56:20 PM

I'm also agreeing with 09 with Wide Load. It doesn't quite look like Wide Load without spikes. Other than that, I kinda like the team.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 06, 2015, 09:43:12 PM

This close enough? Pole spikes are way too long.

(http://i.imgur.com/BgsHilw.png)
(http://i.imgur.com/sdCRjXo.png)

Does roughly as well as the old one. It's also wider.

There's also this... thing (http://i.imgur.com/feMb4gg.png) that does almost no damage and just kind of sucks. I'm likely going to keep the MW as is.
(edit: I threw in another black battery and it still does worse than the other slashatron.)

I'm not changing flapjax to be a pure flipper.

Title: Re: Mr AS Ironforge showcase
Post by: RedAce on August 06, 2015, 10:21:12 PM

Seems good now.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 07, 2015, 08:36:01 PM

Quote from: helloface199 on August 06, 2015, 04:45:49 PM

(https://gametechmods.com/uploads/images/57800Alu1.png)

Quote from: 090901 on August 07, 2015, 06:22:05 PM

(http://i.imgur.com/PRqldgj.png)

These guys suck at building. Here's the real Dementia rebuild.

(http://i.imgur.com/XFqHC3k.png)
(http://i.imgur.com/2V9WkQI.png)

Steel 5.

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on August 08, 2015, 03:39:12 AM

actually 090901's is better

and you guys keep trying making popups out of weaponed flippers

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 21, 2015, 11:12:33 AM

(http://i.imgur.com/kwnEVJ8.png)
(http://i.imgur.com/CAgwLZ8.png)
BW poker. It's the same as my other pokers. Probably not going to make an AW one.
(http://i.imgur.com/RDa9oh1.png)
(http://i.imgur.com/Iljd4Zi.png)
BW VS. 4 5kg teeth. Actually does better against HS than you would expect.
(http://i.imgur.com/e0h4NY9.png)
(http://i.imgur.com/J1vzfz0.png)
SHW popup. 6 Snapper+s, 30 knives and something like pl3. Chassis doesn't actually get hit too often though. It can beat Nuclear Fusion (that SHW SNS I showed off and claimed to "shut down any kind of wedge/gutripper"). Can cause up to 10K damage on a good hit.

Quote from: Mr. AS on August 06, 2015, 02:14:26 AM

(http://i.imgur.com/PUJTmNu.png)
(http://i.imgur.com/jlPllpz.png)
OP ass SnS. These things just shut down any kind of wedge/gutripper in ironforge and are generally just way too strong. I don't actually know if stacking baseplate anchors in things is legal or not, but stacking multiextenders in things in DSL was legal, so I assume it is.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 23, 2015, 08:37:13 PM

So now that jonzu just dropped his latest dramabomb in the GTM land thread and will likely throw a s***show and cry "FURSECUTION" over it when naryar inevitably deletes it, I thought now is totally an appropiate time to show some of my IronStocked bots.

(http://i.imgur.com/D7viIor.png)
(http://i.imgur.com/MwJRc0b.png)
Team SPARK AW. Will probably put a wedge on. Does decent against rammers, shouldn't havok too much.
BW and SHW are these:

Quote from: Mr. AS on August 21, 2015, 11:12:33 AM

(http://i.imgur.com/kwnEVJ8.png)
(http://i.imgur.com/CAgwLZ8.png)
BW poker. It's the same as my other pokers. Probably not going to make an AW one.
(http://i.imgur.com/e0h4NY9.png)
(http://i.imgur.com/J1vzfz0.png)
SHW popup. 6 Snapper+s, 30 knives and something like pl3. Chassis doesn't actually get hit too often though. It can beat Nuclear Fusion (that SHW SNS I showed off and claimed to "shut down any kind of wedge/gutripper"). Can cause up to 10K damage on a good hit.

(http://i.imgur.com/AXjybmU.png)
(http://i.imgur.com/wDO357u.png)
BLACK STORM AW. Deweaponed Sentry (red zone AW I built) in 2 hits.

(http://i.imgur.com/TQufAwB.png)
(http://i.imgur.com/NeoUlEY.png)
BLACK STORM SHW. HS+SnS hybrid. Pretty sure NAR AI had a shell spinner for its extra SHW, so this should be fine. Does well against the HIGH VOLTAGE SHW I built, but then again, it's kind of crap and I might rebuild it.

BW is this:

Quote from: Mr. AS on August 21, 2015, 11:12:33 AM

(http://i.imgur.com/RDa9oh1.png)
(http://i.imgur.com/Iljd4Zi.png)
BW VS. 4 5kg teeth. Actually does better against HS than you would expect.

(http://i.imgur.com/amxCESa.png)
(http://i.imgur.com/T60sjgP.png)
Steelyard Dog SHW. This is the only one with a name so far, that being "Carbon Dog". Rebuild of that crappy SHW rammer from a page ago.

Title: Re: Mr AS Ironforge showcase
Post by: Reier on August 23, 2015, 10:16:28 PM

aw is cute and the carbon dog <3, the sns thing looks messy tho
maybe its just my aversion to sythes

Title: Re: Mr AS Ironforge showcase
Post by: Jonzu95 on August 24, 2015, 12:40:29 AM

Quote from: Mr. AS on August 23, 2015, 08:37:13 PM

So now that jonzu just dropped his latest dramabomb in the GTM land thread and will likely throw a s***show and cry "FURSECUTION" over it when naryar inevitably deletes it

very dramabomb

The bots need skins by the way

Title: Re: Mr AS Ironforge showcase
Post by: Mecha on August 24, 2015, 01:00:32 AM

Quote from: Mr. AS on August 23, 2015, 08:37:13 PM

So now that jonzu just dropped his latest dramabomb in the GTM land thread and will likely throw a s***show and cry "FURSECUTION" over it when naryar inevitably deletes it

imo it wasn't really a "drama bomb" lol it was barely anything
also dope bots sik af nice job bro /end tryhard

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 24, 2015, 02:01:32 AM

Quote from: Reier on August 23, 2015, 10:16:28 PM

aw is cute and the carbon dog <3, the sns thing looks messy tho
maybe its just my aversion to sythes

Sickles make almost everything look bad. It can't be helped.

Those extra knifes do look out of place though that are only there because I had extra weight. Maybe I could put that weight elsewhere.

Quote from: Jonzu95 on August 24, 2015, 12:40:29 AM

The bots need skins by the way

yeah i noticed

Title: Re: Mr AS Ironforge showcase
Post by: RedAce on August 24, 2015, 06:04:56 AM

Quote from: Mr. AS on August 23, 2015, 08:37:13 PM

I thought now is totally an appropiate time to show some of my IronStocked bots.

IronStocked. I like that name. Hmm...

Oh right, the bots look good except for the SnS. It looks a bit too experimental and kinda messy honestly.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 30, 2015, 07:26:57 PM

GOOD OLD BOYS team.

(http://i.imgur.com/nJ4yWEL.png)
(http://i.imgur.com/T1UwNsv.png)
LW - Barbel, another rammer.

(http://i.imgur.com/BZxtkP3.png)
(http://i.imgur.com/S654smY.png)
MW - Creek Runner, based off the DSL version of mud runner.

(http://i.imgur.com/BCW20gm.png)
(http://i.imgur.com/2uc0eX9.png)
HW - Sun Bear, took me 4 tried to get something good.

(http://i.imgur.com/mgPxd5Il.jpg)
(http://i.imgur.com/y90MzD7.png)
crap hammer

(http://i.imgur.com/8ledeYA.png)
(http://i.imgur.com/yCPOO5L.png)
Tried to make a "deadly" HS like in ReStocked. Didn't go so well. Will try with different weapons.

(http://i.imgur.com/34srGyr.png)
(http://i.imgur.com/d0Ri1v2.png)
I Can't Believe It's Not Mango Tango^tm

A VS is way more BEAR-like than a hammer anyway.

Title: Re: Mr AS Ironforge showcase
Post by: MassimoV on August 30, 2015, 07:30:15 PM

The MW looks really well built.

Title: Re: Mr AS Ironforge showcase
Post by: Reier on August 30, 2015, 11:41:46 PM

i can tell you from personal experience "VS" like mango tango work a lot better with as wide a weapon as possible, and supports like that hurt it in the long run because it can't turn as good and gets flanked

end result HW looks like a good robot. I'm a bit worried about the MW with saws on a non-grinder VS, they don't really knock things well with the mesh and you kinda need it tbh? how does it do?

Title: Re: Mr AS Ironforge showcase
Post by: Pwnator on August 31, 2015, 02:09:28 AM

What's wrong with the HW Creep Runner?

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 31, 2015, 04:57:49 PM

Quote from: Reier on August 30, 2015, 11:41:46 PM

i can tell you from personal experience "VS" like mango tango work a lot better with as wide a weapon as possible, and supports like that hurt it in the long run because it can't turn as good and gets flanked

Yeah I'll probably make the weapon a wide row of smaller ninja stars. It definitely struggles against HS.

Quote from: Pwnator on August 31, 2015, 02:09:28 AM

What's wrong with the HW Creek Runner?

Not BEAR enough. I didn't even test it after building it.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on September 02, 2015, 10:01:16 PM

(http://i.imgur.com/BaKrwd4.jpg)

I'm gonna win splash of the month one day.

Title: This is why I "stopped" playing RA2
Post by: Mr. AS on September 05, 2015, 10:53:19 PM

Rookies/XTRA rebuilds. None of them are skinned or renamed yet.

(http://i.imgur.com/yR2RSA6.png)
(http://i.imgur.com/wVTxMzF.png)

Sting Ray. It rams things and is faster than the other LW snowclone rammers I built.

(http://i.imgur.com/9bFPoXu.png)
(http://i.imgur.com/7p5onr0.png)

BOT-CHOY. The original was some weird wedged rammer thing and so is this one. Only difference is that this one has a popup weapon/srimech.

(http://i.imgur.com/gzgdH17.png)
(http://i.imgur.com/UXyjaGg.png)

C R U S H. Wouldn't you know, it's a hammer that doesn't suck complete ass. It can actually beat HS that can drive toward the opponent.

(http://i.imgur.com/LPtQO3X.png)
(http://i.imgur.com/rPFLjkM.png)

Atom Smasher. Did you know that this is the first side popup in ironforge? IIRC Shin Ronin is also the first Wammer+Popup hybrid, with BOT-CHOY being the second.

(http://i.imgur.com/ntlaapk.png)
(http://i.imgur.com/mfOt9hJ.png)

Walrus. It's basically just WIIIIIDE LOAD but with one piston and more weapons.

(http://i.imgur.com/MRvpDzd.png)
(http://i.imgur.com/hwTGUoS.png)

Barbershop Chop. It looks like it would be ass, but it can perform decently enough. Fully invertable and turns into a half-crawler when the plows are taken off.

(http://i.imgur.com/6oK42Hp.png)
(http://i.imgur.com/sk8vTfW.png)

Try #1 at the Sting Ray rebuild. It does alright, but it's not really good at trapping (which is what flamethrowers are all about)

(http://i.imgur.com/uH1HNgJ.png)
(http://i.imgur.com/RkjmY25.png)

Try #1 at the Atom Smasher rebuild. It sucks and the weapon motors come off way too easily, even with the extender armor.

(http://i.imgur.com/IMzzZIk.png)
(http://i.imgur.com/rLXzP4X.png)

Try #1 at the Barbershop Chop rebuild. It's not as bad as AtSm 1.0, but it's pretty mediocre and looks even more ugly than the current BaCh1.

(http://i.imgur.com/zWYRO4F.png)
(http://i.imgur.com/bpeVlxj.png)

Try #1 at the BOT-CHOY rebuild. It's actually really good, the problem with this one is actually that it looks almost nothing like  BOT-CHOY. I might enter it into a tourney or something.

Title: Re: Mr AS Ironforge showcase
Post by: RedAce on September 06, 2015, 10:20:24 AM

These bots look pretty good. Some look a bit messy or don't quite look reminiscent of their originals, but they're fine otherwise.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on September 06, 2015, 12:32:13 PM

Quote from: RedAce on September 06, 2015, 10:20:24 AM

or don't quite look reminiscent of their originals

(http://i.imgur.com/Zrqx0rG.png)
(http://i.imgur.com/d1Stg5g.png)

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on November 10, 2015, 12:36:33 AM

Full body VS.
(http://i.imgur.com/twK3KDa.png)
(http://i.imgur.com/rpfyUY2.png)

Here's my newest bot, titled:

http://www.niceme.me

It sucks. It's riddled with AGOD if I don't pause before the match starts, can't turn, and it spins slow as all hell. If I try this design again it'll probably be with faster z-teks.

Title: Re: Mr AS Ironforge showcase
Post by: Bobyasianboy on November 10, 2015, 08:31:04 AM

wowie nice bot AS

Title: Re: Mr AS Ironforge showcase
Post by: Scorpion on November 10, 2015, 09:06:51 AM

Hahaha, what a tool
And your bot sucks  :p

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on November 10, 2015, 09:27:07 AM

Quote from: Scorpion on November 10, 2015, 09:06:51 AM

And your bot sucks  :p

I outright stated that it sucked in the post.

Title: Re: Mr AS Ironforge showcase
Post by: Reier on November 10, 2015, 12:03:05 PM

you may want to try one that uses static drive and just 2 dual zteks inside the chassis, it's basically the same idea but with less agod
I also might want to try to make it wider

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on November 10, 2015, 05:29:56 PM

Yeah I only built it for the sake of making a full body VS. I'll make a version with actual spinners.

Time for a semi-legitimate bot.

(http://i.imgur.com/87jkjcS.png)
(http://i.imgur.com/8lXNj0m.png)

CAR STEERING WOOOOOO

St10, 3 ballast. Actual weight is 397.3. Car steering isn't wired to turn because that would be both awful and cause the wheels to intersect the batteries.

Moves forward a little bit faster than other popups, doesn't turn as slowly as you'd think. Wedges and damage are pretty decent as well.

Doesn't have a name yet but I'm sure I'll come up with something stupid for it. I'm all for suggestions.

Title: Re: Mr AS Ironforge showcase
Post by: RedAce on November 10, 2015, 06:16:56 PM

Well, I like that you put car steering in this bot, but with it... well, not steering, kinda ruins the point of having them.  But yeah, I get ya.  Not bad.

Quote from: Mr. AS on November 10, 2015, 05:29:56 PM

Doesn't have a name yet but I'm sure I'll come up with something stupid for it. I'm all for suggestions.

Dadnik.

Title: Re: Mr AS Ironforge showcase
Post by: Sage on November 19, 2015, 07:40:04 AM

That actually looks sick. I'm sad that popups with lots of small weapons still seem to be so prevalent/effective though

Title: Re: Mr AS Ironforge showcase
Post by: MassimoV on November 23, 2015, 09:30:07 PM

Full body VS looks sick as hell.

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on November 24, 2015, 06:36:18 AM

the very concept of a popup with treads is funny to my eyes

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on March 25, 2016, 07:11:14 PM

(http://i.imgur.com/3KqUrqc.png)

(http://i.imgur.com/nhsEE6D.png)

ball

The Forge entry, built in something like 10 minutes. Al 3. I bet it counters popups well, but popups are banned from the tourney I'm entering it into.  :confused: Let's see if it can get any OOTAs. I bet there will be a lot of VS that will just ricochet out.

Title: Re: Mr AS Ironforge showcase
Post by: WeN on March 25, 2016, 07:12:33 PM

Quote from: Mr. AS on March 25, 2016, 07:11:14 PM

(http://i.imgur.com/3KqUrqc.png)

(http://i.imgur.com/nhsEE6D.png)

ball

The Forge entry, built in something like 10 minutes. Al 3. I bet it counters popups well, but popups are banned from the tourney I'm entering it into.  :confused: Let's see if it can get any OOTAs. I bet there will be a lot of VS that will just ricochet out.

That Awesome

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on April 07, 2016, 05:13:45 PM

wedge

(http://i.imgur.com/lF8eZ0R.png)

(http://i.imgur.com/fAKPmia.png)

it wedges things

Al 5. Chassis is nearly unkillable against HS, might even pull an OOTA every so often. Skirt wedge is pretty decent as well.

fact: "Biggie Botbash" is the name of one of the tournaments that came with the stock version of RA2. Did anyone actually play the in-game tourneys more than once or twice? I didn't.

Title: Re: Mr AS Ironforge showcase
Post by: Mystic2000 on April 07, 2016, 05:18:55 PM

Nice one, i did a bit of ingame tourneys back when i had the stock AI, would do pretty well for the most part

Title: Re: Mr AS Ironforge showcase
Post by: Reier on April 07, 2016, 07:25:42 PM

diggin it

make a bot called father daughter brunch and robotic combat next :L

Title: Re: Mr AS Ironforge showcase
Post by: Badger on April 07, 2016, 08:52:53 PM

Looks like it would run out of juice super fast, but it doesn't really matter if it has a decent wedge like every other bot in IF

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on April 08, 2016, 04:42:26 AM

i don't remember the exact battery stats in IF but is it not possible to widen your wheel base and put some better batteries in there ? I would assume the larger batteries are more efficient weightwise than the smaller ones.

Although I may be mistaken.

Title: Re: Mr AS Ironforge showcase
Post by: Reier on April 08, 2016, 11:10:27 AM

big batteries in IF are more efficient in electotal but less in amps so for bots that kill opponents quickly you probably need smaller ones. they're also lighter.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on April 10, 2016, 08:03:36 PM

BOT DUMP

(http://i.imgur.com/nmCqdht.png)
(http://i.imgur.com/oQpFiLR.png)

LW- FOUR FIST PHIL, it has four fists. Hence the name. Great at deweaponing but trash against anything with a wedge.

(http://i.imgur.com/BBTcMkM.png)
(http://i.imgur.com/hohOnku.png)

MW - thirteem blapck. HS + Poker hybrid. Putting the HS on a piston gives the spin motor more speed like you'd see in stock, I'm pretty sure this is still realistic since it nothing ever intersects. Firing the piston also gives me a "press X to bumbleball" button.

(http://i.imgur.com/wd9lh6k.png)
(http://i.imgur.com/9rGWp44.png)

MW - I WHUPPED BATMAN'S ASS. Regular flying guillotines generally don't work in ironforge. Pistons are too powerful, which flips over the FG. Servo pistons work fine though. It can cheese anything that's stable/slow enough. Ninja stars having frequency increases it's DPS significantly.

(http://i.imgur.com/10nv35s.png)
(http://i.imgur.com/JX9xcaR.png)
HW - father daughter brunch and robotic combat. VS + Poker hybrid. The combination of spinning weapons and thrusting weapons results in  lot of damage. It's also good at getting OOTAs when faced against a weapon-heavy VS/HS.

(http://i.imgur.com/c6Fi0jL.png)
(http://i.imgur.com/wKbiZxf.png)
HW - Walrus 2. Generic poker. 5 30kg hammers. Nothing to really note here.

(http://i.imgur.com/E56nYAa.png)
(http://i.imgur.com/YcrQa9p.png)
HW - Umurguncy. Named as such because it contributes to the U shaped chassis trend that people don't seem to like. In reality I just wanted to make a bot with dual car steering. It's wired so that it drives like a regular robot. I tried utilizing left/right controls but it just gave it a big turning circle.

(http://i.imgur.com/YPT3NUy.png)
(http://i.imgur.com/BiWaiqZ.png)
LW - YUUUUUGE. Ironforge equivalent to the big LW VS fad going on in DSL. It can punt.  It maulers about as much as you think it would when one of the hammers comes off (read: a lot).

Quote from: chatbox

Gauche Suede: The day someone makes a not bot named after a Vocaloid will be the day I stop playing RA2/RA3
Yesterday at 04:53:01 AM

(http://i.imgur.com/MfyhOSO.png)
(http://i.imgur.com/uYKg73S.png)

cya l8r dude
Haven't actually tested this one too much yet, but it seems to do well against HS and terribad against other VS.

I'm probably going to rename it "Barbershop Chop 2" if I enter this into a tourney, since that's basically what it is.

Title: Re: Mr AS Ironforge showcase
Post by: Reier on April 10, 2016, 09:13:10 PM

tight bots boss

I'm a liiiittle skeptical on some of those axle loads though like on walrus and umurgency, I take a less strict approach than some people on the realistic rule and that's pushing it a bit thin even for me

really diggin the 2 HW VS tho. piston HS is pretty funny too.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on April 10, 2016, 10:25:51 PM

The only robot I used axle loading on was YUGE's wheels.

Title: Re: Mr AS Ironforge showcase
Post by: Reier on April 10, 2016, 10:59:59 PM

I meant like the 5 hammers on walrus and the panels on umurgency which are both almost completely overlapped. I know you "can weld them together" but it seems a bit of a slippery slope when it basically takes the same space and does 5x damage.

Title: Re: Mr AS Ironforge showcase
Post by: Gauche Suede on April 11, 2016, 12:19:35 AM

Quote from: Mr. AS on January 17, 1970, 03:38:56 PM

Quote from: chatbox

Gauche Suede: The day someone makes a not bot named after a Vocaloid will be the day I stop playing RA2/RA3
Yesterday at 04:53:01 AM

(http://i.imgur.com/MfyhOSO.png)
(http://i.imgur.com/uYKg73S.png)

cya l8r dude
Haven't actually tested this one too much yet, but it seems to do well against HS and terribad against other VS.

I'm probably going to rename it "Barbershop Chop 2" if I enter this into a tourney, since that's basically what it is.

that doesn't count that's like saying Bohemian Rhapsody is the bassist for Queen

Anyways, with 13 Black can't you use the servo piston so that you can extend the HS whenever you want and totally cheese Popup.py ?

edit: it's named Luka now ya pedant. I'll think about putting a spinner on a servo piston.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on April 15, 2016, 10:51:55 PM

give me a bot type, I accept all challenges

Title: Re: Mr AS Ironforge showcase
Post by: Thrackerzod on April 15, 2016, 11:00:46 PM

face spinner

Title: Re: Mr AS Ironforge showcase
Post by: FOTEPX on April 15, 2016, 11:04:28 PM

Juggler using discs >100cm, HW or SHW.

Title: Re: Mr AS Ironforge showcase
Post by: The Red Blur on April 16, 2016, 03:13:51 AM

Clamp/poker hybrid.

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on April 16, 2016, 04:24:24 AM

those poker hybrids

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on April 18, 2016, 01:16:57 AM

woooooooo

I told you I'd accept all challenges:
(http://i.imgur.com/5AZQXNO.png)
(http://i.imgur.com/Zj2G4n0.png)
I think face spinners are actually the worst bot type in Ironforge. Not that they were exactly that good to begin with in stock/DSL, but the massive amount of weapons with normals really make it so that you only have about 2 viable weapons to use on FS, and razors suck hard on just about anything, so you're just stuck with spamming beaters.

(http://i.imgur.com/fY2vZnY.png)
(http://i.imgur.com/BNryQyg.png)
Jugglers are also stuck in the same problem as FS, but at least you can kind of use some of the weapons with normals. This one has a wedge and therefore can beat other wedges sometimesoccasionally. Wedge is alright but not the best. Definitely performs better than the FS though.

(http://i.imgur.com/8KPxfAR.png)
(http://i.imgur.com/glv2HUR.png)
dude what
It's basically like a typical clamp, but with a giant-ass piston instead of your typical second burst motor. It doesn't havok itself into oblivion like one would think. It hardly ever actually clamps, but other than that it's decent for what it is. Wedges (and damage!) are surprisingly good. No idea what's with the weird AGOD-type thing going on with the piston axle, but it can't be helped I suppose. ¯\_(ツ)_/¯

I also built some other robots:

(http://i.imgur.com/W6xPELX.png)
(http://i.imgur.com/xyS5j3T.png)
This one I really like. I bet Naryar will as well, but when he likes a robot it usually involves hand lotion or some other kind of lubricant. Notice that it has no wheels at all. That's because the pistons in IF are powerful enough to propel the entire robot forward, even when half the robot's weight is invested into weaponry on the pistons. Fire one piston to go to the left, the other to go to the right, and both to move forward. It was designed to go full Fist of the North Star on opponents, but deweaponing them is fine too.

(http://i.imgur.com/oyHrC8r.png)
(http://i.imgur.com/upAncTu.png)
Made the most painfully generic HS in Ironforge. It's literally just a box with a spinner attached. Now all I need to do is make 89 other robots like this, come up with some absolutely cringeworthy bot names + team mottos and finally I will be able to make ASAI: Ironforge edition. bazinga [painfully forced laugh track]

(http://i.imgur.com/XkPyVv9.png)
(http://i.imgur.com/HJmDY4n.png)
How this one works is that robots hit the front and then the axles swing into the other robot while the pistons do piston things. It goes about as well as you think it would. Main problem here is that the pistons sometimes spaz out and be as unrealistic as possible. It's basically a lesson to not get too #YOLO with pistons. It does a lot of damage because lolicepicks but very obviously isn't realistic. It's more of a WIP than anything, really.

(http://i.imgur.com/gcTOslO.png)
(http://i.imgur.com/k4u464x.png)
It's a hammer. It hammers things. I mean hammers will never reach the point where there's a few generic designs like the case with popups or HS, but there isn't really much to say about it. Hammers along with flippers and pokers are definitely better in IF than they are in other mods, with hammers in particular benefiting from longer weapons, burst motors that won't make your hammer robot do a quintuple backflip, and being able to be really wide (although to be honest this is pretty narrow compared to some other robots).
This is also to my tribute to the fallen soldier, Ffffffriendmeister. RIP in peace, may Jaydee's your hardcore bants live on in the hearts of others. We'll make sure to play Highway to Hell at your funeral.

Title: Re: Mr AS Ironforge showcase
Post by: Naryar on April 18, 2016, 03:43:22 AM

I like the piston drive poker.

And i'll do a proper FotNS bot sometime... it will involve a lot of pistons on bursts

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on August 22, 2016, 10:29:20 PM

(https://i.sli.mg/jPQ3da.png)

(https://i.sli.mg/Ii0deb.png)

Waifu deathorgy entries. Each is a MW.

The plan is for one to take the opponent from the front, and the other from the back.

edit: I wanted to put phantom blood dio on the back of the first bot, but I couldn't find any dakis of the lad.

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on September 10, 2016, 09:22:50 PM

(https://i.sli.mg/V9ctHX.png)

Alu 5

Judging by the name, you can probably guess what this bot does.

Title: Re: Mr AS Ironforge showcase
Post by: Reier on September 10, 2016, 09:45:59 PM

does a nifty not fit instead of 2 pinks?

also screw you

Title: Re: Mr AS Ironforge showcase
Post by: Mr. AS on September 10, 2016, 10:20:58 PM

Quote from: Reier on September 10, 2016, 09:45:59 PM

also screw you

:^)

Hoping to get some hot spinner action in with the arena hazards, at least. Might have to fool around with toppusher.py to have flamethrower compatibility.

I have 3 pinks instead of a nifty, since a nifty only puts out 15 amps compared to the 20 I need for the spin motors.

Title: Re: Mr AS Ironforge showcase
Post by: Reier on September 10, 2016, 11:57:42 PM

im sayin just have a nifty and 1 pink its better
25 amps

Text Only | Text with Attachments