First don't use ant brushless motors for drive as they are intended for weapons.what is ant brushless motors?
And build to the weight limit as the Antweight limit is 125.0
First don't use ant brushless motors for drive as they are intended for weapons.what is ant brushless motors?
And build to the weight limit as the Antweight limit is 125.0
Yeah. Piglets for drive = no.How ant hex to be invertible, wait a minute what is invertible?
Needs to be made invertible (so it can run on it's back) and probably has poor extender work.
First don't use ant brushless motors for drive as they are intended for weapons.Very hard to do that
And build to the weight limit as the Antweight limit is 125.0:facepalm:
Poor extenders means you can make these extenders better/efficient.anchors are 2 kgs lighter in 2.2, so he should definitely be using them in the antweight class.
Don't use baseplate anchors, use multiextenders instead. then use side attachment points to add more extenders.
Oh I know now!Poor extenders means you can make these extenders better/efficient.anchors are 2 kgs lighter in 2.2, so he should definitely be using them in the antweight class.
Don't use baseplate anchors, use multiextenders instead. then use side attachment points to add more extenders.
Lowering the the chassis height should make it easier to make the bot invertible
Let's just admit something, here. It's a million times better than joymander. Although, I still agree with everyone that piglet motors are terrible for drive.
You're doing it again.^This
The E-tek on its own is not sufficient for drive. Only the e-tek with the gearbox is capable of drive. Either go with that or switch to NPC motors.
What about making cheatbot2 bots?
(https://gametechmods.com/uploads/images/54076cheatbot2 anger boom.png)
The king of cheatbot2
tip and question about this bot?
There is some cheatbot2 part here.What about making cheatbot2 bots?
(https://gametechmods.com/uploads/images/54076cheatbot2 anger boom.png)
The king of cheatbot2
tip and question about this bot?
I have no comment, I can barely see what's inside it, and I'm not sure if any cheatbot parts are there.
I'm assuming the cheatbot parts here are the Nightmare motors and the Hovercraft engine? Because other than that, I can't see any cheatbot parts.There is some cheatbot2 part here.What about making cheatbot2 bots?
(https://gametechmods.com/uploads/images/54076cheatbot2 anger boom.png)
The king of cheatbot2
tip and question about this bot?
I have no comment, I can barely see what's inside it, and I'm not sure if any cheatbot parts are there.
Battlebots part and Robot Wars part added in DSL 2.2 as cheatbot2 part.
second version for ANGER BOOM!!are they lawnmower blades? Oh, lord....
(https://gametechmods.com/uploads/images/15477cheatbot2 anger boom v2.png)
nothing to destroy king of cheatbot2!!
question and tips?
5 cheatbots part
2 weapon changed
Inside is same
hovercrafts are easymode anyways.Anger boom! Can fly out of the Arena.
Anger boom! V3 has shield and flamethrower, I post it later
Not a lot anyone can say about this Wen, people don't generally build with cheatbot parts.
TWM3 drive on a SHW ? can it even move ?yes it can move
Is it just me who thinks that smart zone is far too small/top far back ? In fact, do you even need a smartzone to ai this bot?No, you don't. He also doesn't need the ridiculously heavy plough at the back, and the weapon motor is too weak for a SHW, as are the drive motors, and the wheels are too big, and I'm sure this design cant work without a wedge.
Is it just me who thinks that smart zone is far too small/top far back ? In fact, do you even need a smartzone to ai this bot?Sometime
Is it just me who thinks that smart zone is far too small/top far back ? In fact, do you even need a smartzone to ai this bot?Sometime
1 - that do not fitIs it just me who thinks that smart zone is far too small/top far back ? In fact, do you even need a smartzone to ai this bot?Sometime
you do NOT need a smartzone, period.
anyways, since you wanted tips, here are some :
-motor needs to be stronger. use a dual perm.
-drive needs to be stronger as well, your bot is too slow.
-it is unrealistic, the hammers cutting through the perm belt make it unrealistic. we generally build semi-realistically in DSL.
-the rear plow is not useful.
Essentially what Naryar said. If you think armour on the back is neccesary just put armour plates on the back, instead of a plow, because all that'll happen is the bot will run up the plow and attack the top (depending on how fast the weapon actually is)
Removed the rear plow.Essentially what Naryar said. If you think armour on the back is neccesary just put armour plates on the back, instead of a plow, because all that'll happen is the bot will run up the plow and attack the top (depending on how fast the weapon actually is)
:facepalm:
no. since the bot will be upwards it's weapon will be upwards too and won't be able to actually damage the chassis.
unless it is a VS/drum but having a vs or drum at your rear is bad news anyways, regardless of the design.
I think I've cracked the code.
Since WXL can only communicate through poorly made MS paint images, broken english and undertale memes, that would also be the only way to give him advice.
(https://i.sli.mg/KCkB37.jpg)
Hopefully this will get the message through to him.
What is 4 magmotor gearbox and 6 magmotor gearboxI think I've cracked the code.
Since WXL can only communicate through poorly made MS paint images, broken english and undertale memes, that would also be the only way to give him advice.
(https://i.sli.mg/KCkB37.jpg)
Hopefully this will get the message through to him.
i think you forgot some random pokemon images and this inside out thingy
Anyways, BAD drive motors:
-Piglet
-TWM3R (weapon version only), TWM3R2
-The Etek WITHOUT a gearbox on it
-All Perms
-4 magmotor gearbox and 6 magmotor gearbox
What is 4 magmotor gearbox and 6 magmotor gearboxI think I've cracked the code.
Since WXL can only communicate through poorly made MS paint images, broken english and undertale memes, that would also be the only way to give him advice.
(https://i.sli.mg/KCkB37.jpg)
Hopefully this will get the message through to him.
i think you forgot some random pokemon images and this inside out thingy
Anyways, BAD drive motors:
-Piglet
-TWM3R (weapon version only), TWM3R2
-The Etek WITHOUT a gearbox on it
-All Perms
-4 magmotor gearbox and 6 magmotor gearbox
You solved the drive motor problem but there is still a major issue with wasted space inside the bot. Also ant batteries are better than Battlepacks.
You mean DSL3, nar?
That wheel setup is just... bizarre. I'd try to get some front stabilizers instead of the doubled wheels.
Yeah cause DSL 2.2 doesn't exist apparently.
Yeah cause DSL 2.2 doesn't exist apparently.
that was not a helpful post
(http://vignette2.wikia.nocookie.net/undertale/images/4/44/Sansanimated.gif/revision/latest?cb=20160223004601)Yeah cause DSL 2.2 doesn't exist apparently.
that was not a helpful post
Mission Accomplished
Do you have NPC motors or NPC-fast motors for the wheels?NPC-T64
Do the front spinners hit the ground when they spin?NO
i can't say
(https://gametechmods.com/uploads/images/8948aaaa.png)
A drill seems like an odd choice of weapon for an Antweight
Why do you make all of your bots underweight? Do you do it on purpose?It too hard to build in DSL,
(https://gametechmods.com/uploads/images/13480Anthex.png)time to meet Ant-Hex v2
Ant-Hex v1
What if you flip it over?Then it's game over.
Thank you, captain obvious.What if you flip it over?Then it's game over.
What if you flip it over?No invertible.
What if you flip it over?No invertible.
Any comments?
okWhat if you flip it over?No invertible.
Any comments?
Make it invertible.
okWhat if you flip it over?No invertible.
Any comments?
Make it invertible.
(https://gametechmods.com/uploads/images/41067HELP THIS S.png)
Plastic 5 on beetleweight
both is invertible
Holy heck, WenXiangLee actually made a bot that's decent!
Congratulations! :claping
But SNS=instawin.Holy heck, WenXiangLee actually made a bot that's decent!
Congratulations! :claping
I mean.. he did win crapcan derby
WenXiangLee actually made a bot that's decent!https://youtu.be/gvdf5n-zI14?t=4s
.Yes, did you see the wheel on top of the chassis?
Also, is it invertible?
.Yes, did you see the wheel on top of the chassis?
Also, is it invertible?
It's not IRL because the motors are stacked through each other. Luckily, you have enough weight left over to widen the chassis enough to fit the motors in without overlapping. I like the claw weapon.Edit: NVM, I didn't notice the internal view.
If you look at the picture they're clearly stacked.It's not IRL because the motors are stacked through each other. Luckily, you have enough weight left over to widen the chassis enough to fit the motors in without overlapping. I like the claw weapon.Nah I think those are two NPC L(or R)'s which aren't stacked, see Jonzu's rammer on how to do it, basically something like this:
PP
PD
PD
DD
P and D both being NPC L or R's(used p and d because both shapes would work well)
Could've sworn that at the time I edited my post there wasn't a reply. I only noticed the internal view later.If you look at the picture they're clearly stacked.It's not IRL because the motors are stacked through each other. Luckily, you have enough weight left over to widen the chassis enough to fit the motors in without overlapping. I like the claw weapon.Nah I think those are two NPC L(or R)'s which aren't stacked, see Jonzu's rammer on how to do it, basically something like this:
PP
PD
PD
DD
P and D both being NPC L or R's(used p and d because both shapes would work well)
wen tried to build IRL but it fail.
(https://gametechmods.com/uploads/images/75978BULLZOR R.png)
looks decent, but swap the small green control board with the blue control board, it's much more lighter2 Things:
looks decent, but swap the small green control board with the blue control board, it's much more lighterand do what with 1kg
Typhoon flag, duhlooks decent, but swap the small green control board with the blue control board, it's much more lighterand do what with 1kg
why is one of the bots so underweight
why is one of the bots so underweight
It's for a tournament that doesn't allow good defense.
it doesn't have any flair. :Z
Lose 2 of the black bats. And use the weight for a wedge. Then it should be ok. Also wheels guards maybeYou only need 1 black batt for 3 motors, and I disagree on the wedge. On bots with weak drive, wedges are pretty bad, and the bar will hit an opponent before the opponent touches the wedge in most cases.
Tell me when you manage to replicate this.
He has already done that with my dank botTell me when you manage to replicate this.
y tho
my disgusting bot:Still better than most BWs :V
[ This attachment cannot be displayed inline in 'Print Page' view ]
i don't understand irl
I like the flipper. You used DSL 2.3, right?All DSL atm are 2.2. 2.3 isn't finished yet, and progress on it has halted right now. The 2.3 beta you get us more like 2.2 CE but with extra stuffs
Those clipping ant wheels hurt me emotionally. The rest is alright.
Those clipping ant wheels hurt me emotionally. The rest is alright.
Ant wheels = poor traction. Want to keep ant wheels? Layer them by adding more on to increase traction (and make a wider wheel.)
[ This attachment cannot be displayed inline in 'Print Page' view ]Iceburner > Snowflake
he cold, he burn, but also fast. this took me a while because of a small space in interior.
[ This attachment cannot be displayed inline in 'Print Page' view ]just realized I posted the wrong version