Barney will probably do pretty decently. Just make sure the wedge follows the rules.MassimoV said that if the skirt hinge was raised up by one, it's not against the rules. But if he asks me to get rid of it, I'll angle the beater bars down.
Cerialisation looks amazing though. I want it to do well.
If you are adding a wedge to a LW HS you need to make sure your drive is sufficient. Else the recoil of the flipper will mess you up.
The MW looks badass. However, killalot claws have normals and are only decent damage-wise, so expect to be disappointed by the damage potential.
The HW I like. It is however woefully underweaponed. Are the Vladiator lifters static or are they flippers ? Any way I don't think you're gonna go under a lot of bots like that.
badassfrenchie swore pls ban
badassfrenchie swore pls ban
Barney looks pretty ugly aside from the skin which I like.
Digitus looks solid aside from the way that the killalot claws are attatched to the DSL bars. That one part looks odd and flimsy, however the skin makes up for it and then some.
Serialization looks good for a simple design. I especially like how the hammer rests on the back of the chassis.
helloface is a nazi pls banbadassfrenchie swore pls ban
THE BACKWARDS MUSIC NOTE PISSES ME OFF SO MUCH
the bot otherwise is pretty cool
*puts his Naryar critique crash helmet on* Right. I'm prepared, lol.This is very good.
Anyway, here's a music themed bot, which I have ONLY PRIORITIZED THE SKIN!!!:
(https://gametechmods.com/uploads/images/3084HDSQscreenie.png)
Its name is: Hemidemisemiquaver (64th note)
*puts his Naryar critique crash helmet on* Right. I'm prepared, lol.
Anyway, here's a music themed bot, which I have ONLY PRIORITIZED THE SKIN!!!:
(https://gametechmods.com/uploads/images/3084HDSQscreenie.png)
Its name is: Hemidemisemiquaver (64th note)
I am bothersome and i find this a former music student.
I find your music bot bothersome. And i'm not a former music student.
Well, I did some music in college but nothing more than basic education.
Anyways... the skin I find too much in-your-face. it has BIG DECALS and I think it would be better if more subtle; also, the blue texture under isn't that fitted to a "music" bot. Put something like these lines you write notes on.
The weapon is OK, though it could be made cooler, I believe.
about the other bot... *takes Tibsy's head in his hands, shakes it* IS YOUR NARYAR CRITIQUE CRASH HELMET STILL ON, LITTLE GRASSHOPPER ? BECAUSE YOU PUT THIS THING ON AS A CHALLENGE TO ME. AND I LIKE CHALLENGES.
Now as I was saying...
The other one needs a better skin. You can keep it cartoony, but please give your skin an edge line or two, because right here it's just pink.
It would work without edge lines and a more complex texture but simple color and no edge lines = no.
also try to give it ears (lightning spikes ? idk) and maybe side claws (reskin them bear claws, put them on side hammers) so it's a proper cat. maybe a tail.
You might want to put this in the replicas thread, but I guess this works.
I remember making a More Pandamonium rep ages ago and let's just say yours is better. I like how you tilted the piston like it was irl.
Hahahaha how bad did this guy get speared?
That replica looks great
More Panda Monium: I personally hate the robot this was based off of, but you did a decent job of replicating it. I do agree with you in that the top skin looks off.MPM: Yeah, nothing I can do about it though as there are only two pictures of it in existence
The YTPer: Nice. Though I feel like this needs bottom supports for the spinner.
Dammit my BBX LW looks really similar.Really?
Did you re-post the YTPer? I swear it was posted earlier than the time now.
Anyway, both look rather nice. while the skin on the YTPer is different, it's original and reminds me of those days when internet memes didn't make me cringe.
the skin is great. the wheelguards don't look that good imo
I do like the skin but the remnants of the white background of the shark is getting at my OCPD a little.
And yes, DSL pro's... I'll let you get on and I'll go back to Ironforge xD
Haters gonna hate~ :3
inb4 RFS
Looks lanky, but still pretty nice. Like a RA2 Peter Crouch.
I mean the weapon, it just looks a bit awkward. Unique, still.
That is a tiny amount of weaponry even for an IRL bot.Meh, its all good fun.
This guy gets it.That is a tiny amount of weaponry even for an IRL bot.Meh, its all good fun.
No, I agree with Craaig. The skin is ok but the design in itself is somewhat bland and very weak and I don't believe your idea of fun is entering a bot that will get curbstomped.
IRL may not be all about combat efficiency, but it's still a competition.
How about noAnd yes, DSL pro's... I'll let you get on and I'll go back to Ironforge xD
Haters gonna hate~ :3
Oh look, jonzu is multiaccounting.
How about noAnd yes, DSL pro's... I'll let you get on and I'll go back to Ironforge xD
Haters gonna hate~ :3
Oh look, jonzu is multiaccounting.
Tibsy, you're getting better. Try using some slot stickers so the wheels don't look like they're sticking out of the chassis. And what Naryar said, it sorta needs more weapons since it's a HEAVYWEIGHT.
Well there is always the cruiserweight (600kg) class which I was talking about earlier. But since you mentioned BBX and will enter there with it, forget what I said.How about noAnd yes, DSL pro's... I'll let you get on and I'll go back to Ironforge xD
Haters gonna hate~ :3
Oh look, jonzu is multiaccounting.
Tibsy, you're getting better. Try using some slot stickers so the wheels don't look like they're sticking out of the chassis. And what Naryar said, it sorta needs more weapons since it's a HEAVYWEIGHT.
You know specifying 'heavyweight' in all caps doesn't motivate me to improve it.
Thanks though! :)
How about noAnd yes, DSL pro's... I'll let you get on and I'll go back to Ironforge xD
Haters gonna hate~ :3
Oh look, jonzu is multiaccounting.
Tibsy, you're getting better. Try using some slot stickers so the wheels don't look like they're sticking out of the chassis. And what Naryar said, it sorta needs more weapons since it's a HEAVYWEIGHT.
You know specifying 'heavyweight' in all caps doesn't motivate me to improve it.
Thanks though! :)
After BBX I'm not bothering with DSL any more.How about noAnd yes, DSL pro's... I'll let you get on and I'll go back to Ironforge xD
Haters gonna hate~ :3
Oh look, jonzu is multiaccounting.
Tibsy, you're getting better. Try using some slot stickers so the wheels don't look like they're sticking out of the chassis. And what Naryar said, it sorta needs more weapons since it's a HEAVYWEIGHT.
You know specifying 'heavyweight' in all caps doesn't motivate me to improve it.
Thanks though! :)
the thing is he's right. heavyweights kinda need 3x the amount of weapons that there is on a LW because they're roughly 3x heavier.
of course it depends of the bot type but even on a hw popup this weapon weight will be unsufficient. On a thwack... see where I am going ?
We are NOT trying to piss you off or get you out of the forums or disgust you from DSL. At all.After BBX I'm not bothering with DSL any more.How about noAnd yes, DSL pro's... I'll let you get on and I'll go back to Ironforge xD
Haters gonna hate~ :3
Oh look, jonzu is multiaccounting.
Tibsy, you're getting better. Try using some slot stickers so the wheels don't look like they're sticking out of the chassis. And what Naryar said, it sorta needs more weapons since it's a HEAVYWEIGHT.
You know specifying 'heavyweight' in all caps doesn't motivate me to improve it.
Thanks though! :)
the thing is he's right. heavyweights kinda need 3x the amount of weapons that there is on a LW because they're roughly 3x heavier.
of course it depends of the bot type but even on a hw popup this weapon weight will be unsufficient. On a thwack... see where I am going ?
We are NOT trying to piss you off or get you out of the forums or disgust you from DSL. At all.After BBX I'm not bothering with DSL any more.How about noAnd yes, DSL pro's... I'll let you get on and I'll go back to Ironforge xD
Haters gonna hate~ :3
Oh look, jonzu is multiaccounting.
Tibsy, you're getting better. Try using some slot stickers so the wheels don't look like they're sticking out of the chassis. And what Naryar said, it sorta needs more weapons since it's a HEAVYWEIGHT.
You know specifying 'heavyweight' in all caps doesn't motivate me to improve it.
Thanks though! :)
the thing is he's right. heavyweights kinda need 3x the amount of weapons that there is on a LW because they're roughly 3x heavier.
of course it depends of the bot type but even on a hw popup this weapon weight will be unsufficient. On a thwack... see where I am going ?
We're simply trying to make you build better designs.
Simply, advice is not necessarily nice. Advice is simply advice. Take it and your building will improve. Ignore it and it will stagnate.
Trust me once I was only average in DSL. Then I grew up, with other's designs.
I apologise if my advice may have sounded too harsh or arrogant. It wasn't the point and I wasn't trying to be that. I was merely saying what was wrong with your bot, and trying to correct that.
Stop being so attention seeking.Go outside for once. "Meme Wylde"
Stop being so attention seeking.Says the edge master.
"Meme Wylde"+1
Stop being so attention seeking.
you guys are blowing this way way way out of proportionYeah, I might pull a 'cheese' ;)
let the guy build what he wants. if he gets annihilated in BBX well then that's his fault.
it looks like the lovechild of x-terminator and khronic, its really cool looking but it looks like theres some empty space in there from the given angle =p
I didn't know Reinforcement of the Army had it's own robot :PI can see you taken the time to look at my newest bot & paint scheme... Just to assume that the bot's name was an abbreviation for something.
You have a good style of IRL, nice and clean, pretty simple. Great skins too.
IRL Tournaments are quite illogical and have a really unbalanced meta, so I wouldn't worry about it, if you ever feel like you need to win just build drums.You have a good style of IRL, nice and clean, pretty simple. Great skins too.
Why thanks. Though unfortunately this doesn't pay off in tournaments! XD
oh sh** nigga, lil homi got that fresh bape on deck!
It's best not to insult members in my humble opinion. All it will do is come back to bite you in the ass when you don't want it to happen.The ghey wedge doesn't look very good in contrast with the skin, use an MCB wedge instead. Looks good otherwise.
You're a ghey wedge.
a ghey jewish one that isThe ghey wedge doesn't look very good in contrast with the skin, use an MCB wedge instead. Looks good otherwise.
You're a ghey wedge.
So instead of taking my advice you're going to immediately dismiss it because "HURR DURR HELLOFACE" even though RedAce agreed with me?It's best not to insult members in my humble opinion. All it will do is come back to bite you in the ass when you don't want it to happen.tbf its quite rich of him to criticize my builds
So instead of taking my advice you're going to immediately dismiss it because "HURR DURR HELLOFACE" even though RedAce agreed with me?Apologies.
To look like a tongue? Yeah, that would work.So instead of taking my advice you're going to immediately dismiss it because "HURR DURR HELLOFACE" even though RedAce agreed with me?Apologies.
Thanks for the suggestion. I created this in DSL3, I could try and skin one of the skirts to make it red, though the GMF compiler has a dislike for me...
well, i would avoid it, but 3ds max costs what, 5 grand?For some people. (https://www.youtube.com/watch?v=i8ju_10NkGY)
well, i would avoid it, but 3ds max costs what, 5 grand?For some people. (https://www.youtube.com/watch?v=i8ju_10NkGY)
No, this is an IRL style robot and technically not a popup either since the damaging edge is faced the wrong way.well, i would avoid it, but 3ds max costs what, 5 grand?For some people. (https://www.youtube.com/watch?v=i8ju_10NkGY)
well there's your problem.
as for the bot, i like it.although, if it's a popup, shouldn't it use razors?the spike strips go with the alligator theme well.
No, this is an IRL style robot and technically not a popup either since the damaging edge is faced the wrong way.well, i would avoid it, but 3ds max costs what, 5 grand?For some people. (https://www.youtube.com/watch?v=i8ju_10NkGY)
well there's your problem.
as for the bot, i like it.although, if it's a popup, shouldn't it use razors?the spike strips go with the alligator theme well.
the robutt looks good mana ghey jewish one that isThe ghey wedge doesn't look very good in contrast with the skin, use an MCB wedge instead. Looks good otherwise.
You're a ghey wedge.
You could make it some sort of pseudo clamp?No, this is an IRL style robot and technically not a popup either since the damaging edge is faced the wrong way.well, i would avoid it, but 3ds max costs what, 5 grand?For some people. (https://www.youtube.com/watch?v=i8ju_10NkGY)
well there's your problem.
as for the bot, i like it.although, if it's a popup, shouldn't it use razors?the spike strips go with the alligator theme well.
It's not a popup... It's designed to get underneath a robot and flip it over.
You could make it some sort of pseudo clamp?