Author Topic: TheRoboteer's Hit or Miss DSL Showcase  (Read 164907 times)

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1200 on: November 08, 2021, 01:56:24 PM »
WWRA2 entry. Far from groundbreaking but I wanted to do something I knew would be relatively effective considering it's a team tournament, and everyone on my team seemed to be clamouring for me to do one of the flippers. Had planned to do a clamp but between that and the new format that I'm fairly sure will mean that the less competitive bot types will fall out of the tournament pretty quickly I decided to go back to my roots and do the front hinge.

Mostly my basic front hinge fundamentals. 2WD TWMR2s (I originally dabbled with 4WD but I just couldn't get a setup that looked good for this particular design) and 2 VDMA front hinges. This thing should be pretty tanky because it's got steel basically everywhere, and the wedge and KO ability seem really strong from testing. I'm sure the lack of drive will lose it a few fights but hopefully nothing too bad.

 
Erebus Ext.png
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1201 on: December 13, 2021, 08:09:27 PM »
Relatively basic hammer. Might show up in PWT at some point because it's got 4WD (2 TWMR2s, 2 TWMRs) and should have a decent wedge hopefully. Front will hopefully be very tanky since it's 2 60x100 steel panels. 1 large slow VDMA for the hammer, which is only 30kg so won't be hugely damaging. May swap it to an axe head for more damage output

 
Hegemon Ext.png
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1202 on: January 09, 2022, 03:40:46 PM »
Not built a vert in a while so here's one. 4WD (2 TWMR2s, 2 TWMRs) 72V Etek, Heavily armoured too and can self right with the weapon (also somewhat invertible)

 
Miscreant Ext.png
« Last Edit: January 14, 2022, 05:22:16 PM by TheRoboteer »
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1203 on: March 16, 2022, 05:59:13 PM »
Flipper thing. Vague Rapid vibes, also vague Spawn Again vibes. Also has that sweet adidas tracksuit flipper 

2 TWMR2s, 2 TWMRs, 2 medium VDMAs. Front is all steel, rest is Alu

 
Anthracite Ext.png
« Last Edit: April 05, 2022, 12:29:44 PM by TheRoboteer »
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline Hoppin

  • I save GTM
  • *
  • Posts: 2018
  • Rep: 10
  • -rep TheRoboteer. "queermint"
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Discord: Hoppin#0013
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1204 on: March 18, 2022, 08:15:37 AM »
Flipper thing. Vague Rapid vibes, also vague Spawn Again vibes. Also has that sweet adidas tracksuit flipper 

2 TWMR2s, 2 TWMRs, 2 medium VDMAs. Front is all steel, rest is Alu

  [ Quoting of attachment images from other messages is not allowed ]


Love chavbot, adidas really pulled through
Things I did & done

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1205 on: March 18, 2022, 10:13:58 AM »
Flipper thing. Vague Rapid vibes, also vague Spawn Again vibes. Also has that sweet adidas tracksuit flipper 

2 TWMR2s, 2 TWMRs, 2 medium VDMAs. Front is all steel, rest is Alu

  [ Quoting of attachment images from other messages is not allowed ]


Love chavbot, adidas really pulled through
Gonna roll up to tournaments in a riced out Vauxhall Nova
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1206 on: April 07, 2022, 03:11:13 PM »
Not really a 'proper' showcase but I wanted to **** around with the new hworf AP so I updated this old thing by giving it a 72V motor, a nicer wedge and a few bits of cleaning up. It's got some rough edges because it's an old bot but this was mostly just to play around with and see how the hworfs fare

Also damn. TIL it's over 2 years since the last update to this bot. Time flies eh.

 
Anguish VI Ext.png
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1207 on: May 25, 2022, 01:50:21 PM »
Vert thing. There's more I wanted to do with the concept tbh, but I had a surprising amount of weight issues given it's only a 2WD vert. It does have a 72v 4 mag and all-steel front end though so it'll be relatively tanky I hope

 
Sigil Ext.png


Edit:
Based on feedback from Discord I've also done another version with a shortened tail. Also has the added benefit of improving self righting. Cleaned up the supports on this one too which I may well transfer over to the original because I think they look much nicer. Still like the original and will be keeping hold of it, but this will likely be the version you see in tournaments because it can actually self right somewhat reliably.

 
Sigil II Ext.png
« Last Edit: May 26, 2022, 07:28:25 AM by TheRoboteer »
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline Gulden

  • Am I still considered active?
  • Posts: 1339
  • Rep: 7
  • Currently trying to make a Riff in Time and Space.
    • https://www.youtube.com/c
  • Awards Donated money for site hosting 2019 BOTM Winner
    • View Profile
    • Awards
  • Discord: _gulden
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1208 on: May 25, 2022, 04:42:49 PM »
I always love front wheeled 2WD driven robots.  The tube-y chassis is also a great thing.
Unofficial ruler of the RR2 thread.

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1209 on: June 30, 2022, 07:21:53 PM »
Update to Sigil to give it 4WD. Weight to do so gained by swapping the main drive motors from TWMR2s to NPC fasts, swapping a few bits from Steel to Ti (main wedge is still all steel) and swapping the weapon motor from 72V to 48V. Still have the old ones but this will likely be the version seen in comps.

 
Sigil III Ext.png
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline Badger

  • Permanent Artifact
  • Giga Heavyweight
  • Posts: 6319
  • Rep: 3
  • I wish to be with my people
  • Awards BOTM Winner Donated money for site hosting 2019
    • View Profile
    • Awards
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1210 on: July 11, 2022, 07:46:25 AM »
Looks more balanced aesthetically now I think. I like the upgrade, I wasn't too keen on the original version but I do really like this version.
also lol at most toxic guy around calling others out on this sh**
Google Drive with my newer bots

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1211 on: July 25, 2022, 10:21:46 AM »
Weird drum thing for MMNB. Wasn't exactly overflowing with ideas but wanted to get something built. I had a vague shape in my mind which this somewhat matches, though I'd have liked for the bot to be a bit less tall overall. I'd originally planned to have it fully symmetrical and invertible, but that didn't work out so I added a beefy front wedge in a similar vein to old bots like Steel Raptor and managed to cram in a srimech. I'm not 100% on it overall but I think I at least managed to execute the concept decently.

 
Graphene Ext.png
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline 8bean

  • Professional Tourney Rigger
  • *
  • Posts: 782
  • Rep: 10
  • I'm on discord probably
    • View Profile
    • Awards
  • Discord: 8bean#4514
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1212 on: July 26, 2022, 12:03:59 AM »
mad props for making that wack chassis shape work out. If the overall stance was dropped down so that the entire bot was flush with the bottom panel it would look a lot better imo.
Stuff I didn't suck at (from oldest to newest)

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1213 on: July 26, 2022, 12:22:33 AM »
mad props for making that wack chassis shape work out. If the overall stance was dropped down so that the entire bot was flush with the bottom panel it would look a lot better imo.

You're probably right, but there's no way to drop the height while retaining the geometry of the sides with the kinda pyramidal-ish shape to them, which was sorta the whole motivation behind the bot, unfortunately.

In other news, I built another one. Bit more conventional but probably better as a result. Built like an absolute tank with all steel everywhere on the front and 4WD TWMR2s so nice and nippy. Should hopefully be an HS's worst nightmare.

 
Bulwark Ext.png
« Last Edit: October 09, 2022, 05:04:17 PM by TheRoboteer »
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1214 on: September 16, 2022, 02:27:36 PM »
Hammer that definitely didn't start out as a vert. Been wanting to do something with the colour scheme of the Essex Lotus F1 livery for a while and this is it. Will likely do a bit of panel skinning to get some more of the silver and red on there.

 
Venturi Ext.png


Here's a pic of the livery I based it on for context

 
Elio Lotus 81 Essex.jfif
« Last Edit: September 16, 2022, 05:26:09 PM by TheRoboteer »
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1215 on: October 21, 2022, 08:01:36 PM »
Finally got around to skinning those panels. The stripes don't go fully to the end of the wedge due to the wedge edges which irks me slightly, but otherwise I think it looks good. Managed to get them to flow nicely into the extender and panel based stripes at the top/rear of the bot. Also took the opportunity to make the wedge a bit more seamless through better extender setups, and also swapped to a slow VDMA to try to avoid hammer purgatory

 
Venturi Ext.png
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1216 on: January 16, 2023, 06:42:51 PM »
First bot of the year after a fair old break. Won't lie, getting the panelwork to work on this one was a bit of a nightmare, and there's a few rough edges I wish weren't there. Overall though it came out roughly how I'd hoped it to, though I had to make quite a few compromises to get it in weight. Weapon motor is a 48V 4mag (I'd have preferred a 72V) while drive is 2 TWMR2s.

I'll be skinning up some panels for it so that the stripes on the weapon support go all the way down the front, and to add some splashes of colour to the sides too

 
Citronella Ext.png
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline TheOrcCorp

  • I push buttons and hope GTM doesn't explode.
  • *
  • Posts: 853
  • Rep: 20
  • A mean, green, small brained machine!
    • View Profile
    • Awards
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1217 on: January 17, 2023, 06:21:29 AM »
I didn't leave a comment before as it was late/early and my brain couldn't quite comprehend the shape, now that I've slept I gotta say I like this a lot! While I'm not a big fan of the motor sticking out the back the way it is, the rest of the robot is class - wonderful work!
GTM 2017 Awards - Most Unique Bots (shared with DSC) and Most Enthusiastic Member!
GTM 2018 Awards - Friendliest and Kindest/Most Unique Bots/Best Tournament 2018/Best Tournament by Editing/Best Tournament by Matches!
GTM 2019 Awards - Friendliest and Kindest(how)/Favourite Staff Member/Hall of Fame Inductee

Offline TheRoboteer

  • Mr Big Blue Flipper
  • *
  • Posts: 1594
  • Rep: 9
  • "I HATE SEBASTIAN COE!"
  • Awards Donated money for site hosting 2021
    • View Profile
    • Awards
  • Discord: TheRoboteer#8784
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1218 on: January 18, 2023, 10:06:11 AM »
Reworked it as a hammer, which tbh it probably should have been in the first place. Took a further 20cm off the width, was able to go to 4WD (2 TWMR2s, 2 TWMRs). Hammer is a medium VDMA. Also bumped up a bunch of the armour too. Still have the vert version so both may pop up in tournies.

 
Citronella Ext.png
« Last Edit: January 18, 2023, 06:09:09 PM by TheRoboteer »
Notable Tournament Performances:
The Beginner's Guide to IRL:
https://gametechmods.com/forums/tutorials-and-tips/irl-a-beginner's-guide

Offline 8bean

  • Professional Tourney Rigger
  • *
  • Posts: 782
  • Rep: 10
  • I'm on discord probably
    • View Profile
    • Awards
  • Discord: 8bean#4514
Re: TheRoboteer's Hit or Miss DSL Showcase
« Reply #1219 on: January 19, 2023, 02:09:42 PM »
Really like the hammer variant. The idea for the vert still looks alright, it just looks a bit odd with the disc up so high and what orc said about the weapon motor.
Stuff I didn't suck at (from oldest to newest)