Author Topic: SagarisRA2 DSL/IRL Showcase (Read 14492 times)

Badnik96 · « **Reply #80 on:** January 09, 2018, 03:59:57 PM »

teeth look weird sticking out of the drum like that, but other than that it's good to go for gtmcs. just fix the teeth

NeonCalypso · « **Reply #81 on:** January 10, 2018, 03:52:33 PM »

The teeth looks off not gonna lie, replace them with beaters, also is that wedge on the axle? Because it looks steep, It looks quite nice though.

SagarisRA2 · « **Reply #82 on:** January 10, 2018, 04:16:17 PM »

I did fix the teeth so they were all straight, and I prefer the teeth over the beaters as they get a bit more of a thrust, but I could replace the teeth for beaters and make the drums bigger. And the wedges aren't for getting under the opposition, they are instead of 15cm casters which Roboteer suggested.

SagarisRA2 · « **Reply #83 on:** October 14, 2018, 06:18:13 PM »

After hiding in discord for about 9 months, I thought I would actually start posting my DSL bots here.

I made my first good looking HW flipper today after only making a MW flipper before, (which won something in OWO

). It's called Skeletal and wanted to make a skeleton based bot. The flipper is quite heavy so works more as a lifter but regardless self-rights and is quite quick. Hope you guys like it.

Billy5545 · « **Reply #84 on:** October 14, 2018, 06:20:17 PM »

Quote from: SagarisRA2 on October 14, 2018, 06:18:13 PM

After hiding in discord for about 9 months, I thought I would actually start posting my DSL bots here.

I made my first good looking HW flipper today after only making a MW flipper before, (which won something in OWO ). It's called Skeletal and wanted to make a skeleton based bot. The flipper is quite heavy so works more as a lifter but regardless self-rights and is quite quick. Hope you guys like it.

(Image removed from quote.)

Cool flipper. It also looks like an extenderbot, I think, so bonus point. Will be more neat if you also try to reskin a panel by making your new reskinned component to add a name or logo to it

SagarisRA2 · « **Reply #85 on:** October 14, 2018, 06:23:55 PM »

I did think about adding a logo on there somewhere but it got to the point where th chassis was so protecting with armour panels its wasn't visible anymore.

Billy5545 · « **Reply #86 on:** October 14, 2018, 06:48:32 PM »

Quote from: SagarisRA2 on October 14, 2018, 06:23:55 PM

I did think about adding a logo on there somewhere but it got to the point where th chassis was so protecting with armour panels its wasn't visible anymore.

So it's actually a chassis bot that looks like an extenderbot due to the amount of protective panels? I said that you should try reskinning one of those plates for logo

SagarisRA2 · « **Reply #87 on:** October 15, 2018, 10:21:03 AM »

Quote from: Billy5545 on October 14, 2018, 06:48:32 PM

Quote from: SagarisRA2 on October 14, 2018, 06:23:55 PM
I did think about adding a logo on there somewhere but it got to the point where th chassis was so protecting with armour panels its wasn't visible anymore.
So it's actually a chassis bot that looks like an extenderbot due to the amount of protective panels? I said that you should try reskinning one of those plates for logo

Ah OK, yeah sorry, misread that. It was tired and I was late. I might try and reskin this later then

SagarisRA2 · « **Reply #88 on:** December 12, 2018, 06:14:16 AM »

Been making a lot of robots but only either post them on a discord server or not lot anyone see them coz most of them end up going bad. Imma stick to posting on forums now whenever a new build is made and post an axe bot I made yesterday called Nitrite.

Made a new robot today aswell called Chaotic, based on a robot with the same name I made on RWRA2 back in like 2015/16. It has two NPC-Fasts at the back and two TMW3R2 Drives at the front, as well as having a spiked lifting arm to use as a srimech or weapon.

SagarisRA2 · « **Reply #89 on:** December 13, 2018, 04:39:15 PM »

This robot has received good feedback. It's a simple rear-hinged flipper with steel rear panels to protect itself from a HS. Actually flips so that's always a bonus.

Team Code Red Robotics · « **Reply #90 on:** December 13, 2018, 06:49:15 PM »

Quote from: SagarisRA2 on December 13, 2018, 04:39:15 PM

This robot has received good feedback. It's a simple rear-hinged flipper with steel rear panels to protect itself from a HS. Actually flips so that's always a bonus.

(Image removed from quote.)

SagarisRA2 · « **Reply #91 on:** December 14, 2018, 07:22:55 AM »

Carrying on with a new robot everyday, I got round to making something that wasn't a HW. It's a boxy, very powerful flipper. Wide medium in a middleweight provides a lot of launch.

SagarisRA2 · « **Reply #92 on:** December 14, 2018, 02:49:34 PM »

As well as the MW today I have made an angled HS, failed attempt of a Behemoth clone (which won't be shown) and altered the drum on Vespin. Good day's work IMO.

SagarisRA2 · « **Reply #93 on:** December 26, 2018, 07:46:49 PM »

With a big thanks to Hop, I made my first proper working true extenderbot. Thought starting with a rammer would be the best way around it so made a new Durable Box which is actually clean and same power as it's father. Steel extenders all round with the exception of the top and bottom panels being titanium.

SagarisRA2 · « **Reply #94 on:** December 29, 2018, 09:58:35 AM »

Made my first crusher as I needed an idea for a robot, went on the Robot Wars Wiki and landed on Tiberius. Pretty happy with how it turned out and for once I'm posting a bot on GTM before discord.

Merrick · « **Reply #95 on:** December 30, 2018, 12:28:55 AM »

Oooooh, I like that a lot. Are the 3 arms on the back a srimech?

SagarisRA2 · « **Reply #96 on:** January 05, 2019, 08:30:14 AM »

Quote from: Mazakari on December 30, 2018, 12:28:55 AM

Oooooh, I like that a lot. Are the 3 arms on the back a srimech?

The arms are indeed the srimech

SagarisRA2 · « **Reply #97 on:** January 13, 2019, 02:52:50 PM »

Serpent IV is the robot I am happiest with yet. Thanks to Kix's BFE tutorial I made a robot based on a sketch from months ago. It is 4WD, Titanium 10 armour, custom skin and more importantly the flipper is more a launcher because of the two medium VDMA's. My best robot in terms of looks and performance combined to date. Only issue is it's underweight but don't wanna change the flipper as it works well and gives me Series 5-7 Kronic vibes and everything else is max armoured, (titanium 10 chassis and steel side panels)

Edit: Gave it more power as it died with 1 minute left in a fight, so that pushed up the weight nicely

SagarisRA2 · « **Reply #98 on:** January 14, 2019, 07:38:12 AM »

Wanted to carry on practising with BFE'ing chassis points, so thought I would recreate an old build of mine. It was originally a tracked hammer that was so slow it could barely move, but this new version has 2 x TWM3R's for drive which certainly makes it quicker with the tracked vesion. Titanium panels added at the back and side to protect it from spinners a bit more. Certainly an improvement on the old model.

Danangoo · « **Reply #99 on:** January 14, 2019, 11:08:41 AM »

DB2, Poisin Beak, Serpent IV and Acidity Evo are great!