nice change to 1 small black batt to save some weight and try this extender pack it has coloured extenders and armour panels https://gametechmods.com/forums/index.php?topic=19384.msg710759#msg710759 cant wait to see more bots from you :)I did downloaded that a while back, but the problem is that it only showed aluminum extender's, any help.
Hmmm.. that is old extender pack.. send me the screenshot of the extenders section in the botlab.. near the end(https://gametechmods.com/uploads/images/6175Alltheextenders.png) All of my extender's are AL
There is titanium versions in the dropdown list, unless you screwed something up with putting the parts in your game.(https://gametechmods.com/uploads/images/45763Help.png)
Message me on DiscordWhat's Discord? Link Please
I'm going to fix it tomorrow but this is Take This! A future entrant for Kurt's tournamentmy man
You did it wrong, that's why.There is titanium versions in the dropdown list, unless you screwed something up with putting the parts in your game.(https://gametechmods.com/uploads/images/45763Help.png)
It tried to reinstall it but it doesn't appear in the extender part whoops
you have to set your resolution to at least 1024x768 for the scroll to show up
Yeh I'm going to fix that,
(https://gametechmods.com/uploads/images/10828Concept.png)
This is just a concept though, It had a Servo motor (But i can't show it because my game crashed) for drifting, can someone improve with this design?
drifting
someone improve with this design?
Hey man I don't get it, but kinda funny, I'm going to put a chinese store on it.Yeh I'm going to fix that,
(https://gametechmods.com/uploads/images/10828Concept.png)
This is just a concept though, It had a Servo motor (But i can't show it because my game crashed) for drifting, can someone improve with this design?driftingsomeone improve with this design?
fujiwara tofu store skin
Hey man I don't get it, but kinda funny, I'm going to put a chinese store on it.
Redditbots? Wait what?Tournament hosted by the Battlebots subreddit. It's currently in the semifinals (TheRoboteer and DemonOfTomorrow are in the semi finals with Strychnine and Polonium-120 respectively) and the sequel has been confirmed to be LW.
Sorry for double postingRemove a burst, then switch the bursts around till you can have both razor axes on one burst by using the burst axles side attachment points. That should give you more weight to work with.
(https://gametechmods.com/uploads/images/30649PTSD.png)
AL 3 Need help with armor.
These bots are looking fairly nice. I would recommend you try learning to skin though to give the bots a bit more personality.I actually tried to Skin Ceylon, but this happened
whats with the weird extender color scheme?I personally like orange and black.
whats with the weird extender color scheme?I personally like orange and black.
Robocraft Carbon colors.
whats with the weird extender color scheme?I personally like orange and black.
Robocraft Carbon colors.
orange and black is fine
until you add in green and red.
whats with the weird extender color scheme?I personally like orange and black.
Robocraft Carbon colors.
orange and black is fine
until you add in green and red.
Didn't see any of the green.
Colorblindness sucks you know that?
No prob.whats with the weird extender color scheme?I personally like orange and black.
Robocraft Carbon colors.
orange and black is fine
until you add in green and red.
Didn't see any of the green.
Colorblindness sucks you know that?
oh right youre colorblind sorry bby
whats with the weird extender color scheme?
whats with the weird extender color scheme?
(https://gametechmods.com/uploads/images/13879Answer2.png)
Does this answer your question? It wasn't meant to be black, but something went wrong during skinning.
when you were skinning what did you do? tell us everything you did start to finish so we can troubleshoot.These bots are looking fairly nice. I would recommend you try learning to skin though to give the bots a bit more personality.I actually tried to Skin Ceylon, but this happened
(https://gametechmods.com/uploads/images/12002Helpme.png)
Well I uploaded the Texture while the program (RA2) Is still active, after finishing the skin I save it, and then once I go back on RA2 and pressing the skin for Ceylon this happened (https://gametechmods.com/uploads/images/66784Problem.png)when you were skinning what did you do? tell us everything you did start to finish so we can troubleshoot.These bots are looking fairly nice. I would recommend you try learning to skin though to give the bots a bit more personality.I actually tried to Skin Ceylon, but this happened
(https://gametechmods.com/uploads/images/12002Helpme.png)
i'm going to guess you accidentally saved it in different dimensions or maybe as a different file type than the original template. either that or you managed to botch the install of the game somehow to get UI files inside your custom textures folder (you can see blackvolt and the mortal combat event logos on the skin)Finally fixed it's skin :claping
is this irl or standardThis is a DSL-S And IRL showcase though, why not both ;).
he meant the bot in particularis this irl or standardThis is a DSL-S And IRL showcase though, why not both ;).
is this irl or standardTwo of these things are IRL, but Goose King is a flipper but on top of it's head it's another flipper but this time this secondary flipper can cause damage.
that weapon setup is ew(https://gametechmods.com/uploads/images/57591Update.png)
make it look more like a real robot's weapon system
it's genericI'm aware of it
Can you lower the chassis any more? You could use shorter spinner segments and move weight to more armor or (if your lucky) an even bigger weapon motor.1. That's the lowest chassis I can get
And youre prolly gonna need more peer than one black to run a flipper. You'll end up out of juice pretty quick.(https://gametechmods.com/uploads/images/89746CiralynUpdated.png)
Yellow teeth is cool, but lots of empty space and very little battery power. If that's one black, that will run out of power before the match is over, so go for 2. What armour is it?
While I like both of the robots, I think both could be greatly improved.The first one is a LW though, but the problem with this thing is speed
For instance, the first's chassis is way too big. And an astro shouldn't really be powering anything other than a LW but this looks like a MW.
The second is good but could easily be invertible. Pop a couple of casters on either side of the disc and move the drive motor up.
What are the weights of these robots, too?
While I like both of the robots, I think both could be greatly improved.The first one is a LW though, but the problem with this thing is speed
For instance, the first's chassis is way too big. And an astro shouldn't really be powering anything other than a LW but this looks like a MW.
The second is good but could easily be invertible. Pop a couple of casters on either side of the disc and move the drive motor up.
What are the weights of these robots, too?
and also the second one, it can't be invertible since the chassis is way to high and If I lower the chassis the Weapon motor will clip off the chassis.
(https://gametechmods.com/uploads/images/69127CiralynandNEWyellowteeth.png)
Yup the new Yellow Teeth looks Underweight, and Ciralyn looks nice with those wedges.
how effective are DSL Bars on a drum?awful
You do realize those are supports right?Do you mean the sections of chasis? I meant the black squares i circled (ballasts?). I like the new internals layout, though in most cases one black batt should be enough for 3 motors.
Apparently I can remove one Battery for a Bigger weaponYou do realize those are supports right?Do you mean the sections of chasis? I meant the black squares i circled (ballasts?). I like the new internals layout, though in most cases one black batt should be enough for 3 motors.
(https://gametechmods.com/uploads/images/75327Upaa.png)No, the wheels have to be inside the chassis, or at least inside something so that you can't see the disc passing through them.
PL 5, A ring spinner LW. Is this tournament-legal?
(https://gametechmods.com/uploads/images/75327Upaa.png)No, the wheels have to be inside the chassis, or at least inside something so that you can't see the disc passing through them.
PL 5, A ring spinner LW. Is this tournament-legal?
That's not a ring spinner anymore, because there's no ring.
No.That's not a ring spinner anymore, because there's no ring.
But is it still IRL?
(https://gametechmods.com/uploads/images/49955Okay.png)No.That's not a ring spinner anymore, because there's no ring.
But is it still IRL?
Close enough. As a rule of thumb, the disc should always be slightly bigger that the chassis. You could add extenders to the disc to make it look bigger, Ă la Dominotrix.(https://gametechmods.com/uploads/images/75214RUleofMyMiddleFinger.png)
No. Disc needs to be just slightly bigger than the chasis. Kurt suggested you give the ring an extender trim to do this. Look at real life ring spinners.Close enough. As a rule of thumb, the disc should always be slightly bigger that the chassis. You could add extenders to the disc to make it look bigger, Ă la Dominotrix.(https://gametechmods.com/uploads/images/75214RUleofMyMiddleFinger.png)
Fixed?
I think it looks cool, like a giant saw.This, ring spinner is cool
(https://gametechmods.com/uploads/images/24595Gloss Dolphin.png)This, however, is really not cool. Way too simplistic for an IRL bot and the use of a random skirt wedge is really pushing IRL.
Probably the second entry on Masters on Disater, Ti 5, designed to get some sweet OOTA's.
Masters Of Disaster is IRL.dude nice i love a good IRL tournament
(https://gametechmods.com/uploads/images/24595Gloss Dolphin.png)
Probably the second entry on Masters on Disater, Ti 5, designed to get some sweet OOTA's.
Masters Of Disaster is Standard.What is standard anymore?
(https://gametechmods.com/uploads/images/24595Gloss Dolphin.png)
Probably the second entry on Masters on Disater, Ti 5, designed to get some sweet OOTA's.
pro tip: mount your burst motors higher up for more leverage and flipping power
Unfortunately due to my laptop having a password, I have no choice but to use my old computer
(https://gametechmods.com/uploads/images/441SOW.png)
Remember the original Wrecks? on Annihilation Nation it did decently.
(https://gametechmods.com/uploads/images/27539Wrecks Updated 2.png) My Updates done to it, make it more diagonal. Also upgraded it to Ti 3
What Program will I use to edit them?Notepad++
Not bad, but I feel like it would work better as a heavyweight. Beef up the drive and armour, add something on the top so it can self-right, and maybe some decoration on the front and sides.It was a CW on purpose to have more variety on LDAI
(https://gametechmods.com/uploads/images/16451WTF.png)
Problem with the BFE Chassis
(https://gametechmods.com/uploads/images/25030This.png)
What I did during Notepad++
Problem is my computer kept crashing everytime I place a componet(https://gametechmods.com/uploads/images/16451WTF.png)
Problem with the BFE Chassis
(https://gametechmods.com/uploads/images/25030This.png)
What I did during Notepad++
you should still be able to place components in this chassis afaik
...still waiting...Stop doing this, seriously.
Any other idea to get a response?...still waiting...Stop doing this, seriously.
I have 5 options to this.Any other idea to get a response?...still waiting...Stop doing this, seriously.
(https://gametechmods.com/uploads/images/29713The Pack.png)
AW- Dwayne, PL 1 a Angled spinner
BW- Prehistoric Jaws, PL 3, a HS
LW- Upaa 2- BDBLUE why would you reject my ring spinner aah
(https://gametechmods.com/uploads/images/90002Thepack2.png)
This is for Doot's Tourney, FYI
(https://gametechmods.com/uploads/images/33997Astronomy 2.5.png)
Final Updates to Astronomy, It had a small wedge as you see clearly. Same Insides and armor.
Go with 5. Everybody loves inducing seizures am I right?I have 5 options to this.Any other idea to get a response?...still waiting...Stop doing this, seriously.
(https://gametechmods.com/uploads/images/99800SOLARISULTRA.png)Might not be that great in practice, but it looks pretty cool to me.
recently created, TI 5, for doot's tourney.
1. Everytime When I created a skin using Paint.net, It always crashes everytime I imported it, why though?
sorry if this is unrelated but how old are you
15, I messed up the date of my birthday.
only way is could be more disgusting is if it used a mechavore disk
The way the chassis clips through the flipper is hella ugly. And I don't like how the wheels are in the middle. Do you have enough batteries for it?
why is it named "spades" if it's skinned with clubsit's a prank bro
why is it named "spades" if it's skinned with clubsMy bad
Not IRL(https://gametechmods.com/uploads/images/36581Support NIBBA.png)
I really like it. Did you BFE the hammer arm to be 180 degrees? If not, you should do that. Will make it look better and have more power.Yep it's 2.6, Is it enough
Edit: Question: Everytime I when my bot go backward it always turn left/right please help.
Edit: Question: Everytime I when my bot go backward it always turn left/right please help.remove the wheels and put them back on
The blade is too high, the drive is too lowIt's supposed to be an angled spinner
You don't need to put it ultra low, but i think having the blade at half the height it is now will be fine.The drive setup?
You don't need to put it ultra low, but i think having the blade at half the height it is now will be fine.The drive setup?
You could probably use a couple of wedgelets or even just angle extenders because I think you won't be able to get robots into your blade in VS mode.I agree. With the half moon style supports, it gets difficult for a VS to hit anything low. I used wedgelets on BBS and most bots could still get under.
ehhh...You could probably use a couple of wedgelets or even just angle extenders because I think you won't be able to get robots into your blade in VS mode.I agree. With the half moon style supports, it gets difficult for a VS to hit anything low. I used wedgelets on BBS and most bots could still get under.
The flipper looks like Ming 2.Thanks, I wasn't even cloning Ming 2, how coincident.
those back wheels look retarded
(https://gametechmods.com/uploads/images/64002IT WORKS.png)i agree with what everyone else said about this in regards to the vertical spinner but i love it and i want you to do more with it
It has PL3, I prioritize entering ADOTIRL.
Reason for the large chassis is for stability
Edit: Uses a flatmotor and the overkill burst.
The BW seems compact and a good design.Please tell me that Flatmotors are allowed
I like what you did with the clep+beta tail for the SnS but the chassis seems kinda dull.
Neon Izzy is getting better. I'd question the lack of supports on the motors though.
If you're talking LVDR then yeah.The BW seems compact and a good design.Please tell me that Flatmotors are allowed
I like what you did with the clep+beta tail for the SnS but the chassis seems kinda dull.
Neon Izzy is getting better. I'd question the lack of supports on the motors though.
Also yea goblin was a quick entry for gtm live as a multibot
Gonna repeat Gulden on saying that beta hammer/Clep tail looks nice. What's drive for the thwack?Twin TM3R Drives, goes really fast
if you hold shift when you resize an img it wont get stretched out like thatI did hold shift, but it doesn't work
Heres 5 bots for you, Deserted Escape fixed with 4 teeth, now some new ones
[ This attachment cannot be displayed inline in 'Print Page' view ]
Golden Barracuda, Hammer that covers the entire body, its a heavyweight
[ This attachment cannot be displayed inline in 'Print Page' view ]
Neo-Izzy 2, My first attempt at cambered wheels, also a heavyweight
[ This attachment cannot be displayed inline in 'Print Page' view ]
Crispy Mango, Seen in International Wars, Still has that flamethrower, another heavyweight
[ This attachment cannot be displayed inline in 'Print Page' view ]
Floral Fury, Actually a SHW, For a bot that uses Etek drive its very slow (The Drive ones not the weapon motor ok)
[ This attachment cannot be displayed inline in 'Print Page' view ]
A CW That has still has no name
We gotta do something with BWs, I’m sure there are plenty out there following GTM Live’s untimely demise. Would gladly fight your pugbotI challenge you to a BW Fight, Do you agree?
lol more like hound of BARKness, amirite gentlemenNeo-Izzy's Plow is for trapping opponents, so far I have tested it and it works well with thin bots
How well does the trapping shovel thing on the front of Neo Izzy work? It looks cool but narrow.
what a doggo
Hound of Darkness, Its a BW with another small chassis but I realized theres no BW division :(
Sir Morphalot looks pretty cute, how much damage can it cause?Its really good at gutripping, It slained HW's before
I also like Sir Morphalot a lot. Particularly the disc design, and overall compactness of it. Nice job NeonThanks :heart_smiley:
Detonator is the tits.
Love Detonator
Really love the Banana Ketchup boi. Creative use of those axe heads!
Detonator is the tits.
Thank you y'all :heart_smiley:Detonator is the tits.
[ This attachment cannot be displayed inline in 'Print Page' view ]The front of the skin is a lil weird given the theme of the rest of it, and those unsupported vertical extenders to stop the discs hitting the ground when inverted look rather flimsy to me, but other than that looks really neat
Mutant Tilapia, HW
[ This attachment cannot be displayed inline in 'Print Page' view ]The front of the skin is a lil weird given the theme of the rest of it, and those unsupported vertical extenders to stop the discs hitting the ground when inverted look rather flimsy to me, but other than that looks really neat
Mutant Tilapia, HW
[ This attachment cannot be displayed inline in 'Print Page' view ]
Reskin of Duck King for Orc's International side event, Front hinge config's armor is upgraded to Steel 60 to take on spinners
Has anyone tried a tracked front hinge flipper before?http://robotwars.wikia.com/wiki/Trax
[ This attachment cannot be displayed inline in 'Print Page' view ]Much better than the previous versions :thumbup
This Hamtaro is the only one to be upgraded (the old one isn't doing justice to me tbh)
Surely that giant gap between the pokers is gonna give smaller bots somewhere to slot straight into and wail on your chassis whilst being totally immune to your weapons?
Surely that giant gap between the pokers is gonna give smaller bots somewhere to slot straight into and wail on your chassis whilst being totally immune to your weapons?Its built to resemble techno trousers really, its supposed to be a jokebot but OK
Lol what, I found that fist in google images what are you on about
This, also is thats a 2012 pewdiepie brofist on the bot?
Thanks y'allSurely that giant gap between the pokers is gonna give smaller bots somewhere to slot straight into and wail on your chassis whilst being totally immune to your weapons?Its built to resemble techno trousers really, its supposed to be a jokebot but OKLol what, I found that fist in google images what are you on about
This, also is thats a 2012 pewdiepie brofist on the bot?
that looks amazing dude, I think people avoid using the backlash disc as the hit boxes are borked IIRCI mean, backlash discs are legit cool af though, thanks anyway :heart_smiley:
Probably my favorite Full Body Drum on here. So clean. Beautiful work man.
That SnS really needs more reach with the flywheels. Flipper looks pretty nice and effective, what size bursts are you using and what's the armour on it?Its using Large bursts, IIRC its plastic 3
[ This attachment cannot be displayed inline in 'Print Page' view ]
Im pretty happy on how this boy came out tbh, it can pretty much send HW's OOTA with this
I like it but I think the blade should be angled the other way
[ This attachment cannot be displayed inline in 'Print Page' view ]Why did you use a glitch to fit the discs rather than RA2CF
Might eter this at Shred bots along with Roaring Iceberg, Took me Axle loading to fit in those discs
(mini) Minion discs are hard to fit in[ This attachment cannot be displayed inline in 'Print Page' view ]Why did you use a glitch to fit the discs rather than RA2CF
Might eter this at Shred bots along with Roaring Iceberg, Took me Axle loading to fit in those discs
Edit: I forgot, since morphle is not deathmatch legal, I decided to make a new bot completelyI am curious what you meant by this. What do you mean by Morphle not being "Deathmatch legal"? Is it a specific part that I banned? If it has something to do with the DSC packs, I only really restricted the smaller parts. If not, then I have a feeling I overlooked something and now I'm not sure.
There's actually a lot of 10 extenders at the multicolored side though, and I'm pretty tired of rebuilding this lad again and again.Edit: I forgot, since morphle is not deathmatch legal, I decided to make a new bot completelyI am curious what you meant by this. What do you mean by Morphle not being "Deathmatch legal"? Is it a specific part that I banned? If it has something to do with the DSC packs, I only really restricted the smaller parts. If not, then I have a feeling I overlooked something and now I'm not sure.
The bot itself doesn't look too shabby. Bonus points for actually getting the texture line on the bottom of the bot to line up so cleanly. I always have such a tough time with that.
[ This attachment cannot be displayed inline in 'Print Page' view ]
A sequel of a bot I sent to bild months ago
[ This attachment cannot be displayed inline in 'Print Page' view ]
A sequel of a bot I sent to bild months ago
This is quickly becoming one of my personal favorite showcases on here. Keep up the good work! :claping
Parkopino looks much better as a VS... Reminds me of one of those drastic changes that happens when a series 4 robot is revived ten years later.
That's really awesome. The way you combine the S3 chassis shape, the wedge with the angled parts, and the disc is amazing. I also really like the unique wedgeletsThis is quickly becoming one of my personal favorite showcases on here. Keep up the good work! :claping
Parkopino looks much better as a VS... Reminds me of one of those drastic changes that happens when a series 4 robot is revived ten years later.
My guess would be sabretooth, thanks lad
[ This attachment cannot be displayed inline in 'Print Page' view ]
An attempt to use shell panels as top armor, works quite well tbh, bfe'd the bottom plate and the drums for maximum fashioness
Combine is so good looking. You officially have the skill level of Thyrus.Woah im nowhere near as good as thyrus, though I still take that as an compliment
I wonder if people still despise Mech discs in 2018Pretty sure yes. Because, well, They're op
First bot in 2019 wohooan Eggbeater Hammer Hyrbrid?
[ This attachment cannot be displayed inline in 'Print Page' view ]
NGL i'm not a fan of its skin tbh, aiming for a BSOD-theme here but it didn't work for me, Though I'm highly Interested in building hybrids which is sure is something
Anddd it can't self right...
That looks clean as hell. Nice coincidence that we both uploaded hammers today :)
First bot in 2019 wohooan Eggbeater Hammer Hyrbrid?
[ This attachment cannot be displayed inline in 'Print Page' view ]
NGL i'm not a fan of its skin tbh, aiming for a BSOD-theme here but it didn't work for me, Though I'm highly Interested in building hybrids which is sure is something
Anddd it can't self right...
Nice 25/10
Now there's something you don't see every day...
Absolutely gorgeous, reminds me somewhat of Thor from Robot Wars. I remember building something like this a long time ago but yours is much, much better.
Is there any reason for the capsules outside? Like they look good n all, but idk what their purpose is? Still tho, dope stuff
[ This attachment cannot be displayed inline in 'Print Page' view ]Really cool and creative. Just wondering though if it will be for LDAI 3 and my tourney, or something else
Ti 3- props for girthquake for giving me an Idea of sideways hammers, now all I can think off is a pirate ship with a furry as its weapons
[ This attachment cannot be displayed inline in 'Print Page' view ]That's actually amazing
Ti 3- props for girthquake for giving me an Idea of sideways hammers, now all I can think off is a pirate ship with a furry as its weapons
now all I can think off is a pirate ship with a furry as its weaponsOwO, as for the bot itself it's pretty good if I do say so myself
[ This attachment cannot be displayed inline in 'Print Page' view ]
Ti 3- props for girthquake for giving me an Idea of sideways hammers, now all I can think off is a pirate ship with a furry as its weapons
Both are cool. Also, so that BW now has a black drum. Can you send that to me too for your entry?Wait didn't I pme'd you last night?
You couldn't have given the chassis a sloped back?
You couldn't have given the chassis a sloped back?[ This attachment cannot be displayed inline in 'Print Page' view ]
Can the saws reach anything if it gets under it? The arm doesn't look like it would bring the saws down far enough unless your cutting something tall.