Author Topic: Naryar's DSL showcase - Oldschool DSL-S with 2.2  (Read 373401 times)

Offline kill343gs

Naryar's DSL freaks
« Reply #20 on: August 31, 2008, 11:40:19 PM »
Oh and by the way Nar, theres a huge difference between a bump for the sake of bumping and a bump with a purpose. This, obviously, had a purpose.


For once the mods did something right
#MakeGTMGreatAgain

Offline Madiaba

Naryar's DSL freaks
« Reply #21 on: August 31, 2008, 11:54:54 PM »
Does the bot wield the weapon,.. or the weapon the bot?
Yea, some action shots/vids would be interesting.
Input is appreciated. :)
-Arrogance is a quantity devoid of quality...
-As a client once told me "This is my story, and it's sticking to me!"
-Relationships these days are like the 'Arrival' section of the airport: a lot of baggage is being revealed in one place, and not a lot of it is being correlated to its real owners...

Offline Naryar

  • Posts: 23283
  • Rep: 21
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Naryar's DSL freaks
« Reply #22 on: September 08, 2008, 09:06:04 AM »
Hmmm ok. This isn't really a freak, but



Fast NPC drive (perhaps a little TOO fast), two ant batts and one orange, TWM3R Magmotor weapon. Sadly, only 1mm Ti (one of my favorites, that said)

And now, more freakish, his bigger brother, Infernal Contraption:



Basically, the drive is two times stronger, two times more weapons, and three times more armor (3mm Ti) than HazCon.

But he isn't as good as HazCon, well it's the first build.

I don't really know if 4WD is a great idea, and these Magmotors on wedges (ig you look closely, you'll see there are fixed on the second skirt hinge at the middle of the bot), perhaps I should get just two bigger Perm 64-powered discs with heavier weapons (like ripping teeth) and 2WD Etek drive with Techno Destructo wheels...

And I'm planning to make a LW version but IDK if i could fit in 2 discs on it.

Offline Sage

  • *
  • Posts: 6182
  • Rep: 11
  • RA2 Wizard & GTM's Favorite Stock Builder 2015
  • Awards Sage's Favorite BOTM Winner
    • View Profile
    • Awards
Naryar's DSL freaks
« Reply #23 on: September 08, 2008, 06:28:18 PM »
i like the HW one. its original.
You got my vote for RA2 Wizard. Always and forever.

Offline Somebody

  • *
  • Posts: 7200
  • Rep: 13
  • CP: +2
    • SomebodyofGTM
    • View Profile
    • My site
    • Awards
Naryar's DSL freaks
« Reply #24 on: September 09, 2008, 06:24:02 AM »
Why is there a 60 in the top left corner of the Hazcon pic. Great Bots. Are either of these your RAW bots.
I built that big robot on that TV show that time


Offline Dragonfire

Naryar's DSL freaks
« Reply #25 on: September 09, 2008, 10:58:40 AM »
he was probably using fraps

Offline Madiaba

Naryar's DSL freaks
« Reply #26 on: September 09, 2008, 01:23:44 PM »
Cool HW Freak, Nar.  You should enter it into ACAMS' BOTM contest (Venko's is stock only I think...).  Maybe you could rotate the vertical plow around like a radar...
Input is appreciated. :)
-Arrogance is a quantity devoid of quality...
-As a client once told me "This is my story, and it's sticking to me!"
-Relationships these days are like the 'Arrival' section of the airport: a lot of baggage is being revealed in one place, and not a lot of it is being correlated to its real owners...

Offline Naryar

  • Posts: 23283
  • Rep: 21
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Naryar's DSL freaks
« Reply #27 on: September 09, 2008, 03:29:00 PM »
Quote from: madiaba;14566
 Maybe you could rotate the vertical plow around like a radar...


Very smart Mad.

I was planning to use IC as my RAW entry, but these wedged Magmotors suck and it can't trap opponents as well as HC.

I'll be away for two days, and will normally be back with the right RAW entry.

Offline Naryar

  • Posts: 23283
  • Rep: 21
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Naryar's DSL freaks
« Reply #28 on: October 02, 2008, 08:33:37 AM »
Ah! Ah! Here's the LW



But it is the first version and it sucks because these hinges wobble SO much.

Offline infiniteinertia

  • *
  • Posts: 1853
  • Rep: 6
    • View Profile
    • Awards
Naryar's DSL freaks
« Reply #29 on: October 02, 2008, 02:17:15 PM »
I would defintely just have 20 cm extenders off each one and either use better weapon motors or heavier weapons.
#MakeStockGreatAgain


#BANtheHS The Movement

Offline Naryar

  • Posts: 23283
  • Rep: 21
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Naryar's DSL freaks
« Reply #30 on: October 04, 2008, 08:54:31 AM »
I didn't get it Inf... Off each motor? And making a drill? But cramming 4 Magmotors on a LW, especially a NWB "clone" like that, is a little too much.

BTW he has 1mm titanium.

_____

Anyways here's the first version of my ELBITE tabletop entry...



Extremely powerful, gets most MW's out of the Claw Top in 5 seconds or less. But I didn't fought with it AIed it so i'm not sure.

5 ant packs (a little too much), 2 medium Puma CO2s and two medium VDMA's. Thse are normal NPC's, and he's still too fast, but that was for having a good ground clearance.

That's HazCon's chassis and lower skirt hinge.

I was planning on just putting one battlepack and one ant batt, downgrading these skirts to polycarbonate and the armor to 1mm plastic, and then rebuilding the chassis for making it smaller.

But I still don't know how to use all that weight I'm going to get!

Offline Naryar

  • Posts: 23283
  • Rep: 21
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Naryar's DSL freaks
« Reply #31 on: October 12, 2008, 04:45:29 AM »
Most random (and crappy because so unstable) bot i've built in a while...



1mm titanium armor.

Offline Somebody

  • *
  • Posts: 7200
  • Rep: 13
  • CP: +2
    • SomebodyofGTM
    • View Profile
    • My site
    • Awards
Naryar's DSL freaks
« Reply #32 on: October 12, 2008, 06:08:02 AM »
Put a higher extender and a bigger disk.
I built that big robot on that TV show that time


Offline Naryar

  • Posts: 23283
  • Rep: 21
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Naryar's DSL freaks
« Reply #33 on: October 12, 2008, 06:46:51 AM »
Like if I had the weight... And that will make it even more unstable. I need to make another version.

Anyways, here's his big daddy: Grim Ripper 3



1mm Titanium, 2 long ramplates, 2 titanium sheets, the middle skirt is aluminium and the side ones are steel.

I was thinking of this as a deadly war machine... well NO! I was more than disappointed by this one. He's just... average.

Although it was way faster than I thought, he's also unstable and has crappy wedges (i don't know why). And the damage are pretty low for that heavy duty weapon.

Without mentionning that the weight distribution is bad and it often flips. And for no reason, the protected weapon motor sometimes falls.

I should perhaps add a third wedge (like InfCon and HazCon) and side skirts for stability.

Offline infiniteinertia

  • *
  • Posts: 1853
  • Rep: 6
    • View Profile
    • Awards
Naryar's DSL freaks
« Reply #34 on: October 12, 2008, 12:33:25 PM »
I have two LWs quite like that, but i invested less weight in drive and more in battery and weapon.
#MakeStockGreatAgain


#BANtheHS The Movement

Offline Condor33

  • Super Heavyweight
  • Posts: 903
  • Rep: 0
  • Alpha One
    • View Profile
    • Awards
Naryar's DSL freaks
« Reply #35 on: October 13, 2008, 07:13:14 AM »
Quote from: Naryar;17014
Like if I had the weight... And that will make it even more unstable. I need to make another version.

Anyways, here's his big daddy: Grim Ripper 3

(Image removed from quote.)

1mm Titanium, 2 long ramplates, 2 titanium sheets, the middle skirt is aluminium and the side ones are steel.

I was thinking of this as a deadly war machine... well NO! I was more than disappointed by this one. He's just... average.

Although it was way faster than I thought, he's also unstable and has crappy wedges (i don't know why). And the damage are pretty low for that heavy duty weapon.

Without mentionning that the weight distribution is bad and it often flips. And for no reason, the protected weapon motor sometimes falls.

I should perhaps add a third wedge (like InfCon and HazCon) and side skirts for stability.



Put a six mag on. You've either got the weight or can easily get it by making those plastic skirts shorter.
Avoid the beam and you won't get hit!

Clash Cubes 2 Grand Champion--Xenophobik Resurrektion
Winner of the RAW favorite bot award--Humdrums

Offline Somebody

  • *
  • Posts: 7200
  • Rep: 13
  • CP: +2
    • SomebodyofGTM
    • View Profile
    • My site
    • Awards
Naryar's DSL freaks
« Reply #36 on: October 13, 2008, 08:12:44 AM »
He has the weight.
I built that big robot on that TV show that time


Offline Sage

  • *
  • Posts: 6182
  • Rep: 11
  • RA2 Wizard & GTM's Favorite Stock Builder 2015
  • Awards Sage's Favorite BOTM Winner
    • View Profile
    • Awards
Naryar's DSL freaks
« Reply #37 on: October 13, 2008, 03:49:39 PM »
when you put a picture up, at least crop it so we only see the bot. we dont need to see your whole workshop.
« Last Edit: October 13, 2008, 08:06:39 PM by Sage »
You got my vote for RA2 Wizard. Always and forever.

Offline Condor33

  • Super Heavyweight
  • Posts: 903
  • Rep: 0
  • Alpha One
    • View Profile
    • Awards
Naryar's DSL freaks
« Reply #38 on: October 13, 2008, 05:39:20 PM »
Sorry, sage
Avoid the beam and you won't get hit!

Clash Cubes 2 Grand Champion--Xenophobik Resurrektion
Winner of the RAW favorite bot award--Humdrums

Offline Naryar

  • Posts: 23283
  • Rep: 21
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Naryar's DSL freaks
« Reply #39 on: October 19, 2008, 01:46:32 PM »
And... introducting Shadowmoon!



12 small DS teeth, 1mm titanium as a lot of my LWs/MWs, and there are 4 ant batts if you can't see well.

A possible ELBITE entry, but needs to be upgraded.