A wild IRL bot appeared!
I like it, but efficency for irl isnt good with that.Use Flipper makers/extenders, and also use a judge burst, which is a cheatbot2 part so name the bot cheatbot2.The only parts allowed in irl in there are Judge burst and lifter motor.
Unless those are NPC Fasts, I'd upgrade the wheels to hypnos.
no ballast pls or naryar and i will cry ;(but skirt hinges are better
replace it with a metal hinge wedge or something
but skirt hinges are better
https://gametechmods.com/forums/index.php/topic,12081.msg557319.html#msg557319 (https://gametechmods.com/forums/index.php/topic,12081.msg557319.html#msg557319)
BSG = Obvious SriMech is obviousbut skirt hinges are better
https://gametechmods.com/forums/index.php/topic,12081.msg557319.html#msg557319 (https://gametechmods.com/forums/index.php/topic,12081.msg557319.html#msg557319)
Yes, remove the ballast and put a skirt hinge wedge on the front. You have space to replace the 5kg control board with the 4kg one and what is the BSG burst doing?
Use a skirt hinge to attatch a skirt for a wedge. I heard 120cm skirts are the wedgiest, but can someone please confirm.And if you are going to use a skirt hinge, only use the middle attachment point to put on your wedge.
uhh did i say skirt hinge? I meant the other hingey thing.Skirt hinges are just as good or better if you use only the middle attachment point.
edit: metal hinge that's the one
uhh did i say skirt hinge? I meant the other hingey thing.Skirt hinges are just as good or better if you use only the middle attachment point.
edit: metal hinge that's the one
https://gametechmods.com/forums/index.php/topic,12081.0.html (https://gametechmods.com/forums/index.php/topic,12081.0.html)uhh did i say skirt hinge? I meant the other hingey thing.Skirt hinges are just as good or better if you use only the middle attachment point.
edit: metal hinge that's the one
I heard metal ones are better, now i'm confused D:
Yay for 123, now I can get my skirt hinges back and put ONE MOAR RAZOR on each of my bots.https://gametechmods.com/forums/index.php/topic,12081.0.html (https://gametechmods.com/forums/index.php/topic,12081.0.html)uhh did i say skirt hinge? I meant the other hingey thing.Skirt hinges are just as good or better if you use only the middle attachment point.
edit: metal hinge that's the one
I heard metal ones are better, now i'm confused D:
Hello also back in DSL with a Sheck Spinner Grog, The Reaper:Switch the 6 mag to a Dual perm, and remove the Battleaxe with a 120cm angled Polycarb wedge.
(http://urpix.fr/files/fvv3vyjm5rxtb84q53a.png)
2 NPC fast with hypnos
3 ants
Sheck Powered by a 6 mag gearbox
Sledges suck. Keep it a half static/half flail HS.but then you'll moan about it being ghey :P
Sledges suck. Keep it a half static/half flail HS.but then you'll moan about it being ghey :P
also, you don't need those shell panels if you were just attaching those hammers like that. but i'd keep them of you decide on adding flails or just more weaponry, unless you think of a better/different setup to use
Hello also back in DSL with a Sheck Spinner Grog, The Reaper:Switch the 6 mag to a Dual perm, and remove the Battleaxe with a 120cm angled Polycarb wedge.
(http://urpix.fr/files/fvv3vyjm5rxtb84q53a.png)
2 NPC fast with hypnos
3 ants
Sheck Powered by a 6 mag gearbox
Here is the proof of his awesome power
(http://urpix.fr/files/6iy0zwjullkjik1biy1.png)
flipper invasionThe tournament nicely summed up in 2 words.
The MW should be pretty good and solid in combat, don't see much problem with it. Underweight though.No, the MW has some flaws. Get a smaller chassis and attach the E-teks extenally with MEs. Attatch the plow with an ME. Use tornado wheels instead ofpussycat wheels.
lol why would you use tornados when grannies are betterThe MW should be pretty good and solid in combat, don't see much problem with it. Underweight though.No, the MW has some flaws. Get a smaller chassis and attach the E-teks extenally with MEs. Attatch the plow with an ME. Use tornado wheels instead ofpussycat wheels.
if i use too grippy wheels the bot is TOO fastlol why would you use tornados when grannies are betterThe MW should be pretty good and solid in combat, don't see much problem with it. Underweight though.No, the MW has some flaws. Get a smaller chassis and attach the E-teks extenally with MEs. Attatch the plow with an ME. Use tornado wheels instead ofpussycat wheels.
Updates: FlipperFlyer got scraped, instead i will enter a remake of Second sentinel for my AI packwhat
(http://urpix.fr/files/rrh0wyrvgmrtsh2maj0.png)
why are you using even vaguely heavy plows?They look like lights to me.
Don't use all aps on a skirt hinge if you use it for a wedge, it makes the wedge suck. Only use the middle ap to make a wedge.I fixed that, so now what i should change on my BW ?
this was so predictable
To have more firepower in a smaller area, look at 123AI's popups. They use multiextenders to attach the weapons which make razors able to be next to each other in a really tight space.That's only worth using on HW..... so you can pack 4 bsg in there to begin with.
Ah, ok. Sorry if I mislead you, Mystic.To have more firepower in a smaller area, look at 123AI's popups. They use multiextenders to attach the weapons which make razors able to be next to each other in a really tight space.That's only worth using on HW..... so you can pack 4 bsg in there to begin with.
MW popup only use 2 bsg at most so is better off with the good old poly extender setup for reduced cost.
What's hanging off the ME then?
I can't see the pic.Bizzare i can see it perfectly, did anyone also have this problem?
S3 wheels absolutely suck. I learned that with the first bot I showcased.I'm trying to do IRL, i used S3 wheels because they have the right size, should i change to motorcycle or slimwheels
I can't tell if you're trying to do DSL standard or DSL IRL; the fact that the bots are geared towards efficiency and disregarding visual aesthetics makes me think the former, but the simplicity makes me think the latter.
I think the S3 wheels look dashing. I do think that the wedge is ugly, and with the weight saved you can make nicer looking wheel guards though.The S3 wheels do look pretty cool, but there are better looking wheels with better attributes and the same/similar diameters.
Better idea: Move the MOE motor farther into the chassis (That little space in between your drive motors where the ants are is absolutely perfect) and then support/protect it so you're not using a buttload of weight on your motor support/protection and you can use a little more on the armor. And, it'll look a little better.Don't worry i redid the supports and despite downgraded the armor to tit 1 (it was originally tit 3) it's VERY effective, the shell spinners is the only bot type he can't beat because the upper shell tooth tends to take off the disc, i will post later the new supports
I like the wheelguards though. Very clean, very nice.
dsl standard is ruined by a stupid thing called the wedge and without who you CAN'T build a sucessful robot
why not DSL standard ? cause dsl standard is ruined by a stupid thing called the wedge and without who you CAN'T build a sucessful robotLol you do know the top 2 best bot types don't even use wedges.
why not DSL standard ? cause dsl standard is ruined by a stupid thing called the flail and without who you CAN'T build a sucessful robotfixed
So i decided to quit my raging about DSL-S and i build my BoF 3 entry: FlameVenomYou only need one airtank (especially with the infinite fuel glitch), Chassis can be smaller, and the drive is too slow (if you're going for a rammer at least you need a TWM3R).
(https://gametechmods.com/uploads/images/68202FlameVenom.PNG)
I'm going for a flame pusher and WTF is the infinite fuel glitch ?If you bind the flamethrower using an analog instead of a button, and if you keep holding the flamethrower key down the gas will never run out.
Plow wasn't enough wide for my liking and with such a big DSL bar i'm pretty sure that none flailless LW's will reach the drive without been gutrippers or hammersYou can never be sure unless you have proof.
lol that DSL bar is nowhere near enough in the LW class. Even some of the HS I've been getting would be able to rip that thing to shreds,
sorry if i didn't took any battleshots HNM4 s'ai is... a bit stupid in my game
123's bots are the way to go
I think you missed the point of SnS if all you are testing it against is another SnS.
You don't exactly need to test, you just count up the total amount of weapons you have, and probably use FBS1 instead of FPS invert_Dir.I think you missed the point of SnS if all you are testing it against is another SnS.
In this case, though, I don't think he's missing the point. As mentioned, this is a prototype for the first leg of Clash Cubes V, which is an all SnS tournament.
12 ants (4 min matches you know, i want to be sure to not run out of juice)Hey cool, you actually payed attention to detail :3
so tried installing Rhino, failed, ragequitted, fired DSL 3, made this:this is different and exciting Might improve it would be worth
(https://gametechmods.com/uploads/images/31798CW - Cuad The Dissecator.png)
HOW THE DAMN HELL YOU CAN DO A DUAL PERM DUAL VS AT HW LEVEL ???
Yeah i found his but he still had tu use GODDAMN astros with wide ants...what?
oh
why would you do two? Just use one. It's a waste of weight for two.
Nah, it's fine.
Other than the drive, straight drive would've been better. And a smaller chassis could work too. But that's kinda optional.
jeez this showcase is old and useless, oh well, i got a thing that actually is worth showcasing now:Cool. Perhaps you should also upgrade the head to bite and clamp opponents while the flamethrower burns them
(https://i.imgur.com/aqPGNha.png)
SHW - Der Eisendrache (German for The Iron Dragon), flatmotor drive (a.k.a very slow) articulated head, and of course fire breath
pretty cool man
surprised its a shw with how tiny it is
can we get some bigger pictures of it with more angles?
pretty cool man
surprised its a shw with how tiny it is
can we get some bigger pictures of it with more angles?
Face pic:
(https://cdn.discordapp.com/attachments/414228635596226585/451134332896280579/unknown.png)
and here is it next to one of my HWs to get you a scale idea:
(https://i.imgur.com/jjhAKq0.png)
you absolute madmanBOTM was ironforge this month
you could've entered this into botm instead of showcasing tbh
i meant for a future botmyou absolute madmanBOTM was ironforge this month
you could've entered this into botm instead of showcasing tbh
Not sure about the wedge setup either. I feel like small wedges on skirt hinges weren't that good.Not a DSL-S builder, but I know the 40cm-120cm wedges are a better pick than small wedges.
it better has a flamethrower or we riot