gametechmods
Robot Arena => Showcases => DSL TC Showcases => Topic started by: Little lost bot on January 26, 2010, 09:21:32 AM
-
Hi I know I am a noob but would like to show some of my bot and so on I'll be posting more as I make and improve my bots here.
First of all how does this guy look
https://gametechmods.com/uploads/images/8187screenshot.JPG (https://gametechmods.com/uploads/images/8187screenshot.JPG)
https://gametechmods.com/uploads/images/97057screenshot_1.JPG (https://gametechmods.com/uploads/images/97057screenshot_1.JPG)
https://gametechmods.com/uploads/images/28272screenshot_2.JPG (https://gametechmods.com/uploads/images/28272screenshot_2.JPG)
-
you might want to follow the weightclasses for the best results
you could either trim down this robot to 1200kg for Super Heavyweight or up it all the way to 5000kg for Ultra Heavyweight
other then that long batteries are not to great
still looking good
-
Alright i'll work towards that 5000KG and no long got it.
-
please use the "insert Image" button while posting.
-
Actually not too bad, and better than the... thing... you entered in CC3 :P
But yes, WP836E batteries are to avoid for now and a BSG is enough for a 20kg weapon.
You might also want to look at other showcases for ideas and advice.
-
Thanks it sucked mainly because I not that good at MW I speashleyz in HW.
-
Here are some updates on my bot i'm stuck at around 2683Kg
please use the "insert Image" button while posting.
I can't it times out on me every time.
-
You would need a lot more weapons than that. Even a regular HW has 220kg worth of weapons nowadays, and this thing is 2681kg.
-
Well here's some updates on the bot I'm in the 3000KG area now.
-
This bot is OVERPOWERED. You do not need nearly that many bats.
-
Oh ok I'll work on that.
Here are the results. I'm still using lots other wise all the weapons don't retract they just sit there.
-
You need more drive (minimum 4 Etek), and put ant batteries where ever you can fit them. Moving armor to steel 10 can also use up some of the weights.
-
Right Its already got a good speed and manuvering ability its armor is at max and I have the Batt power at minamle any less it would not oprate well E.G. weapons go down but go back up very slowly so long to let a bot attact 2-3 times before it can do its next attack that sort of thing. any other idaes? Thanks for the advice 123savethewhales, Urjak, Naryar,JoeBlo but I take one thing out and put something els there it averges around 3600-3200KG is it a cross between UHW and SHW? I thing i need a bigger chassis.
Unless there's room for in prove ment I'll get a name for this guy ideas?
-
Replace the Overkill blades with something bulkier, like 70 kg hammers on DSL bars. It will last longer and pack more of a wallop.
Though personally, I think it would have been much easier to go down to a 1200 kg SHW than try and make a UHW... but now that you're started on it might as well go all the way.
-
Ok Thanks Clickbeetle I'm star that as soon as I can.
-
Alright guys Here is my UHW bot it's around 24KG over now.
Here is the finished pruduct https://gametechmods.com/uploads/files/7605Bot0.zip (https://gametechmods.com/uploads/files/7605Bot0.zip) let me know on what you think of it. I don't know what to name it.
-
Alright here is my First but modifed bot THE DISC HAMMER ya I know I suck with names.
The modifikation is it used to use the cold fustion core and even now its not a full poformance it'll do well with a rammer AI here it is https://gametechmods.com/uploads/files/4078Bot0.zip (https://gametechmods.com/uploads/files/4078Bot0.zip)
-
:O
Very overpowered anyways. Remember, spin motors just need 10 amps (1 ant battery) to work, but will benefit from 2 each on heavier weight classes for more battery longevity.
-
Just wandering why then does it say this motor take 360 for E.G does it wiast or waist power?
Or are they used at all?
-
try making an AW...
ehehehehehehehehhehehehehe...
-
AW AN AW i'll try no garentys (how ever you spell that)
*wanders and mumbles AW?*
-
Ok here is my VERY first and frustrated (deeling with the huge wait restiktion) AW bot
-
compact chassis is the key to good AW robots
blue control board is helpful and multi extenders replacing the base mounts is a must
;)
-
Um ok I'll work on that. Here goes.
-
Dont worry... you're not the only one to be frustrated by antweights :ermm:
Is that a Stock Round Extender Black ? Don't mix Stock with DSL dude... also get rid of these cheat parts.
-
Well that Failed here are some pics it ramdomly Havoks.'
-
Dont worry... you're not the only one to be frustrated by antweights :ermm:
Is that a Stock Round Extender Black ? Don't mix Stock with DSL dude... also get rid of these cheat parts.
There are no cheat or stock in this bot. I'm stiking to strait DSL. Its the shadow on the exstender
-
Ah ok.
Anyways on your last design, Astroflights are drive motors, not weapon motors...
That weapon setup is far from being the best as well, and avoid multi-extenders when they are not directly attached to the baseplate.
-
Om which one do I use, I tryed some and they did not connect to the bace plate.
-
You only need 1 or 2 ants on this. Make it a FS with a Piglet spinning the disc.
And shrink the chassis.
-
Oh ok I'll work on that.
-
Use the image uploader on the first page and use the top link and copy it in your post
-
Use the image uploader on the first page and use the top link and copy it in your post
Om then you can't see the pics and you have to download them then.
-
Use the image uploader on the first page and use the top link and copy it in your post
Om then you can't see the pics and you have to download them then.
No, I means the image is part of your post.
-
Sorry for not posting in here for a while my com is not letting me build bots right now. Game crashes.
-
Sorry for not posting in here for a while my com is not letting me build bots right now. Game crashes.
No need to be sorry. Hope your compy gets fixed soon!
-
I feel your pain, man, my comp with Stock has a trojan. :mad:
-
I feel your pain, man, my comp with Stock has a trojan. :mad:
Then delete it.
-
it's not possible to delete a trojan. I've tried, though, 30 times.
turning on my comp is a bad idea :mad:
-
Alright here is the closest I could get with a slitly good bot the closest to a AW ( I can't seem to make a AW)
-
it's not possible to delete a trojan. I've tried, though, 30 times.
turning on my comp is a bad idea :mad:
Try AVG thats what I use seems to work for me.
And the prob I had with my com is it some how get RA2 screwd up randomly its not really able to take the game and so it will develop probs and them I have to renstall the game.
What AI should or would be better for my Disc hammer bot?
-
Sparkey: Have you tried a system restore?
-
dude, it's a trojan. lol I have not even turned my comp on since then because:
1) it's pointless
2) The trojan also had spyware, so whenever I turn it on, the spyware is hooked up again. I'm gonna take it in someware.
-
If you can't get rid of it, you're screwed. Trojans give out personal information to the world, people have reported identity theft because they got a trojan.
If you're stuck, get a new computer.
-
yeah, 'cause when I have a brand new, bought in '08 touch screen all-in-one monitor computer and a strugling buisnnes, I can afford that. :P
we'll be able to get it fixed. My uncle is a computer master, and knows how to build them, so I'm gonna mail it to him and he can work with it. fixing it from another comp did not work BTW.
-
dude, it's a trojan. lol I have not even turned my comp on since then because:
That's why your on the forum all the time?
-
I have two comps lol :mrgreen:
stock will only work on my desktop
I'm doing this from my LT
i have DSL on my LT
My Desktop has the virus.
-
You said you have 2 com's could you try and hook up the infected one to the good one and have the good com scan and lock down or fix all spy wara ect?
Just a idea.
-
Back on topic here is the Lw i'm planning to enter in BBEANS.
Its got 2 ant weight motors for moving and 1 piglet to spin the shell.
-
32 kg of weapons on a LW HS is insufficient.
-
My entry for BBEANS6 has 21kg.
-
My entry has zero.
-
Erm....
-
my planned entry has 120.
-
Ok so in other words it sucks I'll work on a nother.
-
Alright here is a flipper bot.
-
getting better:
ant wheels are very havoky
don't use angle conectors.
-
your only repeating what other people have said on your showcase
-
BEACUSE IT'S TRUE RETARD
STOP SPAMING!!!!!!!!!!!!
-
Ok thanks Sparkey98 still getting in the habit. Stagfish please don't spam my show case people are free to give advice here just because they said it once does not mean you get it right away, more than one way of saying advice can help.
-
Here is the same bot but with no angle connecters and ant wheels
-
vladiator flipper sucks at getting under stuff, use EMERGENCY flipper its better than skirts i think
-
Ant wheels are much better than minis. Plus that motor is quite exposed, use a BSG motor, then fiddle with the remaining weight.
No stag, just no.
-
Alright here it is agein.
-
don't listen to staghole, put the vlad flipper back on.
-
Um ok well here goes.
-
Ok here is the result Sparkey98 I put the flipper back on the main flipper. Stagfish I did put the emergency flipper on like its tail?
-
@Sparky: Do not give advice until your more skilled
@LLB: Remove the one of the flippers or move it to the front. Its only eating weight.
-
Um ok.
-
LOL here is the improved flipper bot. Here are some pics it sent one of the purple cabs in the air and the car you see it in the pic
-
Triple post I just tryd it ageinst Crit emergency and put up a good fight and My weges are better than his. :) :D hehe sorry.
-
I would try to put Hypno wheels on this and tighten the chassis. You need a front and rear stabilizer as well.
-
I will work on that.
-
Um one Q how do you make it smaller in lenth wise? My com says its as small its gona get.
-
Uncheck the 'snap to grid' box.
Anyways, your bot is currently too slow to be good.
And ant wheels are underrated. They are pretty good with Magmotor drive, simply low hitpoints.
-
Ok
-
Here is this what you were thinking had to get rid of a bat and its spike.
-
Get rid of 2 ants and use a Mag snapper instead of two BSG's. Use the blue CB, too.
-
QUIT GIVING BAD ADVICE GUYS! XO
Mag snappers and BSGs have the same torque!
LLB: Not a bad bot you've got there, but it could use a little work. For one thing, use one Multi-extender per BSG instead of 2, that will save you 6 kgs to use on something else.
For my personal taste, I'd make the chassis less sloped, put a bit of armor on the front, add a wedge, and use skirts instead of E-wedges, but I think that's just me.
Play around, experiment.
-
With the flipper, you want some kind of rigid frontal stabilizer. This will prevent your bot from simply falling forward when you attempt to flip a bot.
-
Badnik, if I'm seeing that there is 6 ants and BSG need about 2 ants to power one, getting rid of 2 ants would make it underpowered.
-
If I do all that it for some resone now needs a back stableizer and I was on the verg of opmenting that them the game crashed and now it won't open I hope I can resuce it.
-
QUIT GIVING BAD ADVICE GUYS! XO
Mag snappers and BSGs have the same torque
correctamondo or something like that :P
as Naryar found BSG's fire faster then Mags too... in fact the only advantage I have seen with Mags was on clamps as they are stronger when holding another robot.. but BSG's all the way for subweight flippers
-
Alright here is the little guy agien.
The guts are the same now using weges and have a weak sheld in the frount it can still get under the capnits easy.
For the bbeans ternament Juging what kind of bot should I make so that way I can enter a good LW. This guy is kind of getting on my nerves I do an inprove ment and a nouther prob starts up.
Is this a bad queston?
-
Here is one I just made how is it for a nooby at this.
-
That's actually not too bad, except that 92 kgs of weaponry is too much for a Piglet. Get a stronger weapon motor, but you might want to consider mounting it inside your bot or armoring it because every weapon motor between Piglets and E-Teks have very low HP.
-
every motor from Piglet up to E-Tek has very low HP.
Odd, I always thought Piglets had very high HP compared to most motors...
-
every motor between Piglets and E-Teks have very low HP.
Completely false.
-
What do you mean Naryar? The last time I checked, TWM3Rs, Perm 80s, and Dual Mags had only 400 HP. Is this not true, or are there other weapon motors between Piglets and E-Teks?
-
Oh wait... you said 'between'...
(http://www.slashfilm.com/wp/wp-content/images/ragetoon.jpg)
Yes, you are right.
-
Here is an update on him he's unstable but powerful some much the weapon mostly countrose him. help?
-
whoah! that weapon is Huge!
-
No Sparkles, this weapon is huge:
(http://s895.photobucket.com/albums/ac159/123savethewhales/leviathan4.jpg)
-
^Win^
Anyways, I think you need some kind of stabilizer coming out of each side. That weapon is a little too huge for my tastes as well, though it does look cool.
-
Huge for such a small bot.
-
Aye
-
Multi-extenders have low HP, it is not wise to use them when not attached to the chassis.
https://gametechmods.com/RA2wiki/index.php?title=Naryar%27s_DSL_tips
-
I'll work on that.
-
That was fast all I had to do was change the wheels now its stable. it runs throu bat power kinda fast can't seem to add a bat. The bars right now I'm lazy right now I'll fix them later.
-
Any idea on how to give it more speed? Its like one of my UHW's only its not.
-
You could easily use astroflights on this one. Make the chassis bigger too.
-
um then it turens in to a middle weight.
-
Ok here is another vertion of the lil guy.Plastic 3
-
You will definitely want to lower the chassis so your bot can become invertible.
Also, you might want to opt for a Perm motor rather than the E-tek...
-
I cant lower the chasiss My com even with snaps off won't let go lower. The perm, well let me try.
-
Nobody wants to download images, please use the uploader located in the front page.
-
Nobody wants to download images, please use the uploader located in the front page.
So like this?
Here it is with an up date.
(https://gametechmods.com/uploads/images/31276screenshot_198.JPG)
(https://gametechmods.com/uploads/images/5937screenshot_200.JPG)
OK now its working what changed?
-
Raise your drive motors some more so you can reduce the ground clearance of your bot. It'll be better.
-
Ok
-
That setup is "normalized" use a disk with alot of light weapons attached.
YES good job on the picture.
-
Here is an update The 3rd wheel is for speed and turning
(https://gametechmods.com/uploads/images/54274screenshot_208.JPG)
-
Axes have normals and thus are far from being the best choice on spinners.
Also 3WD = worthless in this setup (not to mention asymetrical), just get Astroflght or Slimbody drive.
Might remove 1 or 2 ants as well.
-
ok
-
Here is anouther bot a BW a bit unstable but fast and deadly.
(https://gametechmods.com/uploads/images/43080screenshot_213.JPG)
(https://gametechmods.com/uploads/images/35906screenshot_214.JPG)
(https://gametechmods.com/uploads/images/55307screenshot_215.JPG)
-
Use the 4 kg CB
-
It's most likely glitching because of the large wheels. Try looking for smaller wheels, because grip doesn't mean anything if your bot's unstable. :D
-
Well here is the bot from 5 postes ago.
(https://gametechmods.com/uploads/images/40930screenshot_219.JPG)
(https://gametechmods.com/uploads/images/63771screenshot_221.JPG)
And now the one bot that all it neede was I forgot the name well the new thing on it.
(https://gametechmods.com/uploads/images/15440screenshot_217.JPG)
-
1sr is unrealistic and underweight.
-
with the first one, you can flip the Perm 180 degrees so that it's realistic and the weapon doesnt touch the ground. You can also use better armor (Tite 3) and iron spikes, to get it to the weight limit.
With the second one, it only needs 1 ant. Then you have the weight to increase drive and add a wedge.
-
No, it needs 2 ants. Ignore Badnik.
-
whenever I say "2 Ants", Nary flames me.
-
Nary flames you for saying 2 ants when 3 are needed.
2 ants are definetly needed here, 3 if the weapon is on a piglet.
-
it is on a piglet
-
3 ants then.
-
Ok here is my BW it has a stablizer and doesent glich most of the time it fast, invertable, a little hard to controle it it likes to do a spin if you hold the turn putten you need to tap it but its My first BW :smile:
(https://gametechmods.com/uploads/images/47374screenshot_223.JPG)
-
You should put the piglet inside the bot, it will save you 3kgs and use a blue control board if you can fit it.
-
defiantly put the piglet inside, get rid of the stabilizer and use a skirt hinge with poly skirts to at least give a wedge
-
get rid of the stabilizer and use a skirt hinge with poly skirts to at least give a wedge
Exactly what i was going to say.
-
Ok
-
I tryed to do that and ither my com is going weird agein or it won't fit in side.
Just for fun I had my first victory here in the Xtreme BW Competition :mrgreen: with Lil egar
-
Ok here is anouther bot its very affective to my suprize it was beating all HW that I put it ageinst before my com crashed here's some pics one was a close mach.
(https://gametechmods.com/uploads/images/2116screenshot_234.JPG)
(https://gametechmods.com/uploads/images/46150screenshot_237.JPG)
(https://gametechmods.com/uploads/images/58372screenshot_240.JPG)
(https://gametechmods.com/uploads/images/10014screenshot_242.JPG)
(https://gametechmods.com/uploads/images/73267screenshot_243.JPG)
(https://gametechmods.com/uploads/images/44028screenshot_244.JPG)
(https://gametechmods.com/uploads/images/14208screenshot_245.JPG)
-
You should use gripper wheels, that doesn't seem like a lot of weapons on a HW. Also, don't use ME when they're not attached to the baseplate. What's the Armor? Unless it uses the BSGS to self right, use 6-8 ants. Small wedges are better than E wedges. Also, it looks like you a n00b driving. Use a blue control board too.
I'll let someelse finish up.
-
You should use gripper wheels, that doesn't seem like a lot of weapons on a HW. Also, don't use ME when they're not attached to the baseplate. What's the Armor? Unless it uses the BSGS to self right, use 6-8 ants. Small wedges are better than E wedges. Also, it looks like you a n00b driving. Use a blue control board too.
I'll let someelse finish up.
ME?
-
You should use gripper wheels, that doesn't seem like a lot of weapons on a HW. Also, don't use ME when they're not attached to the baseplate. What's the Armor? Unless it uses the BSGS to self right, use 6-8 ants. Small wedges are better than E wedges. Also, it looks like you a n00b driving. Use a blue control board too.
I'll let someelse finish up.
ME?
Multi Exenter.
-
Extender
Anyways, excepted for grog these are really weak bots. Just get NAR AI.
-
You think I'm ready for them?
-
For the weakest teams and some of the average fighters, yes.
-
Ok so here is the remake of Lil eger. Sorry I took so long here my game is crashing up a storm right now run's for about 15 min or less right now.
(https://gametechmods.com/uploads/images/87466screenshot_247.JPG)
(https://gametechmods.com/uploads/images/39999screenshot_249.JPG)
-
whats that multi extender doing?
-
Its holding a support that is a polycorbin bar to keep the weapon from hitting the ground
-
It won't matter if the weapon scrapes the ground on RA2.
-
If you remove the extender & The Multi extender youll egt 5KG and you could upgrade the wheels to Hypnos
Theyre moar grippy (Vlad=1.3 Hypnos=1.6 i think)
Ive been reading the .txts lately...
-
Ok I'll try that when I can. Game is buggy right now.
-
It won't matter if the weapon scrapes the ground on RA2.
IT. WILL.
If it scrapes the ground it will slow down, and weapons that do touch the ground deal less damage as well.
If you remove the extender & The Multi extender youll egt 5KG and you could upgrade the wheels to Hypnos
Theyre moar grippy (Vlad=1.3 Hypnos=1.6 i think)
Ive been reading the .txts lately...
Really ? Last time i checked Hypnos = 1.5 :P
And this design should not have hypno wheels anyways.
-
Sorry for not posting here in a while but RA 2 is not opening any more FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUUU my com well I formated it recently do to some other problems and now it won't even let me play RA2 right now and the other problems are hardware because I still have them but FFFFFFFFFFFUUUUUUUU I wanna play RA2!
-
Download from my sig. Just get a new copy.
-
AWWWW crap your download works but that means I need to re transfer new copy's of RA2 with all the different mods on my mem stiks I had at least 2g of space used up there.
Anyway thanks
"starts the flies transfers after deleting the corrupt copy's"
-
Time for more bots. Its bin a while sines i build a bot so here is name less.
(https://gametechmods.com/uploads/images/74621screenshot_5.JPG)
(https://gametechmods.com/uploads/images/75320screenshot_8.JPG)
(https://gametechmods.com/uploads/images/55238screenshot_10.JPG)
Its got ok-slow speed, ok maneuverability. Its combat is untested right now(dos speaker literary goes nuts now on this game beep beeep beeeeeeee "tone lowers"eeeeeeeep its does all the time on RA)
-
Normal E-Teks are terrible for drive. Those spinners at the front are unrealistic. What makes the difference between the weight in the two pics?
-
Steel 10 armor as for the front spinners they could be done in real life and unless I redo the hole back system stuff the normal E-teks are what I could fit.
-
Then you will have to probably redo the chassis.
-
Ok I fixed this old fellow his speed is slow and maneuverability is slow but its very dangerous any way Its beaten all my friends but so far. Its weakness is small bots in the back they sometimes get stuck there and chew away at my tires :mad: but there stuck as well but every bot has a weakness. Oh right it only has 10 bats now 10 bats 10 motors.
(https://gametechmods.com/uploads/images/70700screenshot_12.JPG)
(https://gametechmods.com/uploads/images/56074screenshot_13.JPG)
-
Get it down below 5000 kgs and you can enter it in my upcoming UHW Tournament :mrgreen:
-
Perm's arent designed for driving purposes, use NPC Fasts if you want speed. ;)
-
I'll see what I can do. Its my most success full bot in terms in combat.
EDIT: Here he is. Somebody He is just under 5000 and I forgot to tell you its got 2 flame throwers that are for looks (they can't hit very well and they share 1 air tank) Also I'v needed to down grade its armor from steel 10 to tin 5 other wise it stayed above the 5000kg mark. Its speed is still slow but faster and maneuverability is faster but harder to stop if you spin.
(https://gametechmods.com/uploads/images/29868screenshot_19.JPG)
(https://gametechmods.com/uploads/images/84675screenshot_20.JPG)
-
becasue its 6038.4kg heaver then any of the robots you fight it with? :P
-
becasue its 6038.4kg heaver then any of the robots you fight it with? :P
ITS the only bot so far that I'v build so far that I think lives up to its potential! The only other typs so far are hover craft and No one seems to care about those even hover vs hover. Now if all you want to do is..... (can't put into words) then get out!
-
Stuff it fulla batteries, and make it so all weapons are same, maybe all 70kg hammers?
-
Stuff it fulla batteries, and make it so all weapons are same, maybe all 70kg hammers?
For bats I got told its waisting space and wait if a fill it with bats, for weapons they are the same just 2 on each disk has a small weapon to get the bots that try to get under.
-
Tips: Don't use perms for drive. They weight too much to be worth it. And you have a couple weeks. I want to post a discussion thread but I need to finish TWOC first...
-
So, I have to redo the whole drive system?
Edit: Somebody Don't use combat zone Disc Hammer is to big:
(https://gametechmods.com/uploads/images/51939screenshot_26.JPG)
(https://gametechmods.com/uploads/images/33005screenshot_33.JPG)
(https://gametechmods.com/uploads/images/3139screenshot_30.JPG)
And can end up doing the match on his head which fails most of the time because if he gets stuck in a corner it can get counted out and on top of it he's move across the floor randomly.
Edit: Also would some one mind AI this guy? I am learning but still working with stock on that (and it crashes half the time)
-
I will be providing mediocre AI sklz for the tournament. Anyways, it will be in the DSL Blade Arena (Big enough for UHWs.)
-
Ok whew. He's good when he is controlled on his wheels.
Edit: Here is version 2.
(https://gametechmods.com/uploads/images/14155screenshot_34.JPG)
(https://gametechmods.com/uploads/images/27427screenshot_36.JPG)
He had some fun with this guy in the next 2 pics
(https://gametechmods.com/uploads/images/91304screenshot_38.JPG)
(https://gametechmods.com/uploads/images/34281screenshot_40.JPG)
Now his guts.
(https://gametechmods.com/uploads/images/42543screenshot_41.JPG)
He is very dangerous mainly do to his weapons and medium speed and ok turning.
Its only got 4 drives I forget the name but its reworked enough to fit another disc on. For the discs I can't get them to go out more or they can't get armed do to the building sphere in the bot lab but in real life just shave the corner of the hammers and its good.
-
Hello?
-
Hi
-
Thats What I do don't copycat. Anyway anything to add about the bots performance?
-
Aww, I thought we were gonna have a conversation.
-
Ok *dusts off the palce* Here is a rammer that seems to have some problems.
(https://gametechmods.com/uploads/images/45259screenshot_51.JPG)
(https://gametechmods.com/uploads/images/86617screenshot_52.JPG)
-
Yeah, your RA2TC bot
Atleast there isn't a huge amount of enpty space, try using razors though
-
Now I'm going to get some........... scolding over this but I find razers fall off a bit fast for my liking.
-
Now I'm going to get some........... scolding over this but I find razers fall off a bit fast for my liking.
Well, that isn't really a problem for a rammer.
-
You can use a better setup than that for the weapons, if you want to use the multi extenders, just attach the other extenders off the one on attached to the baseplate.
Also, i'm guessing you have 7 ants in there, if you want more weapons, you can get rid of an ant or two.
Oh, and the solution to the razorz breaking off is to either ADD MOAR or to use hammers instead.
-
Use hammers if you don't want the weapons to fall off as fast I recomend a beater bar / other high DP weapon combo.
-
Hammers...... hadn't thought of that I'll go replace them with hammers. Will show the update when done.
-
The trouble with Vlads is they only deal damage with the pointed sides. I might try rotating the four outermost spikes to horizontal, if you want to keep Vlad Spikes as a weapon.