gametechmods

Robot Arena => Showcases => DSL TC Showcases => Topic started by: KidDelta on October 31, 2018, 05:07:45 AM

Title: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 31, 2018, 05:07:45 AM
Soooo.... I have been, you know, being incognito and looking at other people's showcases, posts and other stuff. It's probably time I've actually made a showcase, especially because I've made some decent robots.
Title: Re: KidDelta's not that good DSL Showcase
Post by: WeN on October 31, 2018, 05:14:31 AM
Any Robots?
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 31, 2018, 06:30:22 AM
Ok fine, Here: This is my Valkyrie rip-off, and I gotta say, He is OP, Being able to KO the AI, besides Industrial Coal Miner, which needed some luck.

  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: pokebro14 on October 31, 2018, 06:38:51 AM
You need to attach the photo to the post.
Title: Re: KidDelta's not that good DSL Showcase
Post by: Billy5545 on October 31, 2018, 06:48:37 AM
Yeah. Also, suggestions aside from photo fix.

Give internal shot, as well as extra details like armor and weight. In addition, you should get RA2CF if you don't have it, because it looks like that the weapon motor is external, and the drive partly sticks out. If you have it and it's why the motors are like that, then make the motors inside the bot, because external motors are ugly and un-IRL. Also, your bot is pretty weapon spammy. Two or four typhoons are enough, though a good IRL bot always has two teeth on a disc
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 31, 2018, 07:02:50 AM
It is Component freedom, and also I suck at taking screenshots , so yeah, 

  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 31, 2018, 07:08:00 AM
I made one with some bigger teeth, but the motor thing is still an issue. Armor is 26 titanium.

  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: Billy5545 on October 31, 2018, 07:09:57 AM
It is Component freedom, and also I suck at taking screenshots , so yeah,
If you use CF, then there's no excuse to have the motors like that honestly. They all should be inside the bot, or at least have adequate support for the weapon motor. Also, internals. For internals, you can take screenshot in the bot construction part of botlab.

Also, please crop your screenshots if it's in the botlab and use the insert attachment function
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 31, 2018, 07:16:43 AM
For my first try making a showcase, Yeah, I gotta say this kinda sucked, but, I will try to improve. I can see all of the Bad things with my posts, but maybe in the future, I can at least have better pictures
Title: Re: KidDelta's not that good DSL Showcase
Post by: pokebro14 on October 31, 2018, 07:17:14 AM
Less typhoon teeth. That's my only complaint.
Title: Re: KidDelta's not that good DSL Showcase
Post by: Team Code Red Robotics on October 31, 2018, 07:44:30 AM
Not bad on Nighthawk, I strongly suggest you make the motors fit the chassis, as it makes it look unrealistic, Other than that, Great Job! Hope to see more of your bots, Maybe I should challenge you (jk I NEED to rebuild my bots, especially poor ole redrum)
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on November 02, 2018, 12:38:03 AM
SCREW IT, I'M GONNA TRY TO MAKE SNAKE.
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on November 10, 2018, 06:42:55 AM
Also I've got an idea to make a robot for each Kamen Rider, from the tv series, Kamen Rider. Probably a bad idea, but, it's worth a shot. I mean, I need to make 30+ robots, (note: the robots are based of of the Heisei riders, no showa here), and some might need to be Clusterbots, like W/Double. But, I hope I can make them before the end of the year.
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on January 12, 2019, 08:05:50 AM
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Been a while, huh
This is Ferocious Forklift 2. It has 4 npc fasts and technically 4 weapons.
Title: Re: KidDelta's not that good DSL Showcase
Post by: jdg37 on January 12, 2019, 03:32:11 PM
Scoop and wheel guards look like they don't connect, maybe wider wedge and lose boxy wheel guards
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on February 14, 2019, 08:52:31 AM
*Removes dust from showcase*
Been trying to make some extenderbots lately to see how good I can make them, this is the latest result:
  [ This attachment cannot be displayed inline in 'Print Page' view ]  (Don't mind the stray mouse)
598.4 kg (Or whatever weight this game uses)
2X NPC fasts, Perm 132 for Weapon motor
All armor panels are steel, some Aluminum Extenders
Title: Re: KidDelta's not that good DSL Showcase
Post by: Badger on February 14, 2019, 09:34:40 AM
would be nice to have some more screenshots (sides, rear) but it looks solid from this angle. It would really benefit from some colour though, I think.
Title: Re: KidDelta's not that good DSL Showcase
Post by: TheRoboteer on February 14, 2019, 09:52:06 AM
Pretty decent. Bit messy in some areas, most notably the top panel (try to get rid of that panel gap), but solidly put together for the most part.

Seconding Badger on the colour thing too, and I can't help but feel like you're wasting a lot of weight by having all of the panels be steel. Do the rear panels where it's rarely gonna get hit really need to be steel?
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on February 14, 2019, 07:50:42 PM
Do the rear panels where it's rarely gonna get hit really need to be steel?
Aw crap you right
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on May 13, 2020, 11:55:53 PM
*blows away dust*
*cough* *cough*
Some generic 6wd Front Hinge. All Steel wedge, Titanium flipper panel and Aluminum bottom panel and Top armor parts.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
It's a box but at least it looks decent

oh and also here's it's back with it's flipper open.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: 09090901 on May 14, 2020, 12:54:30 AM
noooo you can't make a robot with a rectangular shaped chassis, it has to be 5 dimensional and blue

drama aside, it's a nice bot
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on May 24, 2020, 12:23:18 PM
Introducing D10 !

Powered by 2 Locked TWM3R2 motors for each tread, a slow snapper for the srimech and of course a flamethrower because Fire Pretty.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

And yeah I said Srimech sine this bad boys head is so heavy might as well use the lifter idea and just use it as it's srimech
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: bloodys45 on May 24, 2020, 01:18:09 PM
Nice robot :claping
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on May 29, 2020, 11:20:24 AM
Introducing Ghost Dog!

Same drive motors as D10, but with an extra set of tracks (because y not),2 slow snappers for it's lifter/srimech and a flamethrower, because hey, I needed to spend weight.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on June 03, 2020, 10:44:07 PM
Haven't done a chassis bot in a while, so with New Blood coming up, I taught, "Hey, I haven't done a cluster bot, why not make one?"
So with that, Here's Aphex Twins.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Both are Middleweights, with steel/aluminum wheel guards and an aluminum wedge at the back.

Both have 2 Hypnodisc wheels powered by NPC Fasts, both have discs with 2x small typhoon teeth powered by TWM3R's.
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on June 04, 2020, 11:29:48 AM
Tried out Geese's Belted TWM's and made an Eggbeater.

Here's Propaganda.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

4X TWM drive with Hypno wheels, 4x large beaters for it's egg beater. It tosses a lot
Title: Re: KidDelta's not that good DSL Showcase
Post by: Squirrel_Monkey on June 04, 2020, 01:38:48 PM
Introducing Ghost Dog!

Same drive motors as D10, but with an extra set of tracks (because y not),2 slow snappers for it's lifter/srimech and a flamethrower, because hey, I needed to spend weight.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
  [ This attachment cannot be displayed inline in 'Print Page' view ]
Hey look, someone made an actually working version of that purple monstrosity i made a while back.
Is the mouth big enough to pick stuff up?
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on June 04, 2020, 08:20:55 PM
Introducing Ghost Dog!

Same drive motors as D10, but with an extra set of tracks (because y not),2 slow snappers for it's lifter/srimech and a flamethrower, because hey, I needed to spend weight.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
  [ This attachment cannot be displayed inline in 'Print Page' view ]
Hey look, someone made an actually working version of that purple monstrosity i made a while back.
Is the mouth big enough to pick stuff up?
Some stuff, although it's no really the most effective lifter either
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on June 24, 2020, 07:04:55 AM
Bot Dump

First, A Perm Lightweight, Adeques
  [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  

Second, a heavyweight Vert/Wedge bot for Royal Rampage, Guerilla, which has yet to be updated for the crash patch.
  [ This attachment cannot be displayed inline in 'Print Page' view ]     [ This attachment cannot be displayed inline in 'Print Page' view ]  

Third, a bot I definitely didn't forget to show off before entering into some tournaments, Ferocious Forks of Fury.
  [ This attachment cannot be displayed inline in 'Print Page' view ]                  [ This attachment cannot be displayed inline in 'Print Page' view ]  

Fourth, returning from OW4, Silhouette IV
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

And Finally, Silhouette XL, a Super-heavyweight version of Silhouette for Robottal Wars
   [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  


..... I should probably make the pics the same size next time
Title: Re: KidDelta's not that good DSL Showcase
Post by: 8bean on June 24, 2020, 01:23:24 PM
Guerilla and Silhouette look really polished. The detailing on top of both of these is phenominal. Also, Adeques is really impressive for a lw
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on June 27, 2020, 04:23:58 AM
Some Random LW I made. Based on both Sir Lance-a-Frog and Escavalier.
  [ This attachment cannot be displayed inline in 'Print Page' view ]         [ This attachment cannot be displayed inline in 'Print Page' view ]  
 
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on June 28, 2020, 03:01:27 PM
Another Random LW. Accelgor and the skin took too long.
  [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: TheOrcCorp on June 28, 2020, 03:17:01 PM
I am LOVING these Pokemon themed bots!
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on June 30, 2020, 04:54:38 PM
Ferocious Prime. It's a shw version of FX4 that can't flip/lift anything but it can constantly self right just fine.

  [ This attachment cannot be displayed inline in 'Print Page' view ]          [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on July 02, 2020, 09:56:32 AM
So was upgrading some of my bots after the Crash patch. Updated Guerilla to be more in weight.

So first of is it's Vertical Spinner arrangement, which before had almost all aluminum armor and wedge, but now with some shaving I got some stuff updated.
First thing you'll notice is that it lost it's rear wheel guards, which was the shaving down I was talking about. It already lost 50kg thanks to the Crash patch but removing the rear wheel guards just gave me more weight for some armor and, what I really wanted to add in the original design, a srimech. Top armor and the Top wedge parts were updated to be Titanium to stand more of a chance.

 [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  


Next the Wedge config was updated too. It loss even more weight compared to the vert, so I had more stuff to play with. First with the boring stuff out of the way, the black armor pieces were upgraded to Steel instead of Aluminum. Now for other stuff, the srimech was updated to look nicer, and the fire is a lot stronger, having 2 Flamethrowers.

 [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on July 06, 2020, 08:43:46 PM
I.M.D
  [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  

UPDATE: Updated the frame to blend the motor mount more into the frame
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: 8bean on July 06, 2020, 10:05:43 PM
the update looks way better than the original imo. also the interesting shape on the wheels looks cool
Title: Re: KidDelta's not that good DSL Showcase
Post by: Squirrel_Monkey on July 07, 2020, 02:51:29 AM
Looks a lot better than my attempt. Can yours actually drive?
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on July 07, 2020, 04:45:55 AM
Looks a lot better than my attempt. Can yours actually drive?
Originally had NPC fasts which meant it was too fast, but after nerfing it to regular NPC's it drives pretty cleanly
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on July 07, 2020, 02:42:58 PM
Omen Basically IMD  but a lw. 2X TWM for drive, Piglet for the weapon.
  [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  

"Don't talk to me or my son ever again."
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on July 11, 2020, 12:04:13 PM
FX5 ....yeah most of my newer bots are just me taking a design then remaking them in different weight classes. Planning to replace the old Ferocious Forklift with this one.
  [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  

Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on August 18, 2020, 06:30:24 PM
Tachyon, A Tanto-Style Vert.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on September 01, 2020, 07:54:12 PM
Minor update to Guerilla. It uses a Perm 80 now and has triangle panels at the front wedge
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on September 02, 2020, 11:25:17 AM
FX5 (Ferocious Forks of Flipping Fury) got a new flipper design. That's it really
  [ This attachment cannot be displayed inline in 'Print Page' view ]    [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on September 05, 2020, 02:01:23 PM
Allord, CW Drum Spinner. The front was a pain
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: 8bean on September 06, 2020, 10:38:09 PM
i wish it had some color but it looks amazing nonetheless
Title: Re: KidDelta's not that good DSL Showcase
Post by: Reier on September 08, 2020, 02:50:47 AM
Spicy
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 02, 2020, 10:24:49 PM
So during Day 3 of Botober, I made a MW Toad with Iron fists for Bulky. I didn't realized how heavy those things are so the chassis armor on that things was almost non-existent. So I decided to make one without iron first and instead more like the Ribbot clone it was meant to be.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: Jaydee99 on October 03, 2020, 01:18:05 PM
Mild
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 08, 2020, 11:09:41 AM
Ok so I was quite active during my first week of Botober. So I just wanna wrap my first quarter of Botober up.







Title: Re: KidDelta's not that good DSL Showcase
Post by: NeonCalypso on October 08, 2020, 08:50:13 PM
Jesus you literally pumped out 8 Heavyweights without a sweat

Meanwhile I'm struggling to build with all the online classes

Keep up the good work
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 09, 2020, 07:57:07 AM
Jesus you literally pumped out 8 Heavyweights without a sweat

Meanwhile I'm struggling to build with all the online classes

Keep up the good work
The secret is an overwhelming instinct to procrastinate anything  heck
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on October 23, 2020, 01:39:45 PM
Eyy back for the 2nd quarter of Botober Round up. Took a bit of a break because 1. I was creatively drained, and 2. My exams are next week so I kinda was a little less determined to finish Botober bots.







Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on November 02, 2020, 03:37:17 PM
So yeah kinda gave up on Botober for a load of reasons, like general fatigue and exams coming up. I just said "Screw it" and just made what I wanted to make.
Little rant over, here's Excee. MW EndGame clone. FAST, as it's a MW with 4X NPC Fast drive with a Perm 80 for it's weapon. Srimech is it's disc spinning the opposite direction and hopefully landing on right side up. It's more consistent with the Wedge then the forks.

  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on November 14, 2020, 03:52:44 PM
Some stuff I've been doing in the meantime
Tokyo Shock: Basically a CW Excee.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

DI0: Remake of an old CW I made. Still can't lift but hey the Jaw actually moves.
  [ This attachment cannot be displayed inline in 'Print Page' view ]  

Ghost Dog: Basically DI0 with a different color scheme, New top jaw and different front claws
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: J on November 20, 2020, 12:05:39 AM
Boy, I say that yellow fella be one tough lookin machine

(https://iili.io/FlTXIf.jpg)
(https://iili.io/FlTMes.jpg)
(https://iili.io/FlTMes.jpg)
(https://iili.io/FlTMes.jpg)
(https://iili.io/FlTMes.jpg)
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on November 26, 2020, 05:41:09 PM
OW5 POST - Team Frayed
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Silhouette 4  (Seeded 15) : Now completely different from it's OW4 version. 4X NPC and a Perm for it's weapon. Fast and deadly, with a durable front.
Guerilla (Qualifier) : Now only having 1 config, the perm vert. I kinda expect it to do better than Silhouette actually. Same specs as Silhouette, with an added srimech,.
Speed King (Reserve) : Fastest bot here, with 6x NPC fast with Hypno wheels on all of them, with a durable front and a medium burst for it's weapon. It has some bad records so that's why it's my reserve
Aphex Twins (Lock-in) : 2 Gemini clones with some deadly weaponry. It's main weakness is that it's easily pushed aside, with only 2x NPC fasts + Hypno wheels each. Also, it's proven that it's gonna cause collateral damage because Horizontal spinner.
Title: Re: KidDelta's not that good DSL Showcase
Post by: superbomb122 on November 27, 2020, 03:36:56 PM
Haven't check this showcase in a longass time, but this stuff is really cool! Keep up the good work
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on December 12, 2020, 05:59:43 AM
So during Day 3 of Botober, I made a MW Toad with Iron fists for Bulky. I didn't realized how heavy those things are so the chassis armor on that things was almost non-existent. So I decided to make one without iron first and instead more like the Ribbot clone it was meant to be.
  [ This attachment cannot be displayed inline in 'Print Page' view ]
Remember this bad boy?
Now it has a vert-drum config
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on January 28, 2021, 06:48:18 PM
First new build of 2021, so here's my WWRA2 bot.
Payload, rear hinge inspired by SubZero
  [ This attachment cannot be displayed inline in 'Print Page' view ]  
Title: Re: KidDelta's not that good DSL Showcase
Post by: KidDelta on May 31, 2021, 04:48:27 AM
Been a while, huh?
Update:
When changing the color of the wheelguards, I've shaved a lot of weight from them. So now I'm able to have the Wedgelet config have steel fronts and thicken up that toothpick of a tail
  [ This attachment cannot be displayed inline in 'Print Page' view ]