Author Topic: Ianh05's DSL showcase. (Read 7533 times)

JoeBlo · « **Reply #60 on:** July 11, 2010, 01:03:21 AM »

Quote from: Doomkiller on July 11, 2010, 12:50:16 AM

Good to see you building again ian

YES very much so, we just need to drag H@z's ass on here and we will have a big aussie team once again..

ianh05 · « **Reply #61 on:** July 11, 2010, 01:15:43 AM »

version 3:

metal hinge wedge, armored top, invertible, 4 beater bars and 4 razor tips :)

Doomkiller · « **Reply #62 on:** July 11, 2010, 01:18:37 AM »

Very cool, but for some reason I like the one with PA skirts better. By looks, that is :P

JoeBlo · « **Reply #63 on:** July 11, 2010, 01:34:16 AM »

I like v3 the best

v2 looks to skeleton, like you built it all but didnt have the weight to fill it up with Armour pieces

the wedge on v3 is the most practical

ianh05 · « **Reply #64 on:** July 12, 2010, 10:42:32 PM »

Working on a LW juggler, here's what i have so far:

Doomkiller · « **Reply #65 on:** July 13, 2010, 12:20:49 AM »

4 ant would perferbably be better, as you need atleast 1 ant for each spin motor, and I cant remember if mag drive with hypnos is better than npc with minis...

Looks very cool nontheless :D

G.K. · « **Reply #66 on:** July 13, 2010, 12:55:34 AM »

That is awesome.

ianh05 · « **Reply #67 on:** July 13, 2010, 01:45:42 AM »

new LW:

1st attempt at making a LW full body VS.

The Ounce · « **Reply #68 on:** July 13, 2010, 02:16:37 AM »

It's nice to see you building again! I don't have much to say about the juggler, unlike the VS.

Using Piglet motors for drive is a bad idea; it'd be better to use Astroflights or Slimbodies. To improve on the spinner setup, I suggest decreasing the space between the two motors (by mounting them in front of the chassis or narrowing the chassis). That way you can use a smaller side panel. You could also use a shorter aluminum extender so your weapon would have more reach.

Give it those improvements and I'll be happy.

JoeBlo · « **Reply #69 on:** July 13, 2010, 02:19:56 AM »

take a look at R0B0's VS for ideas

ianh05 · « **Reply #70 on:** July 14, 2010, 04:42:31 AM »

still working on my FB VS however i have now got my LW Juggler to the point I'm happy with it...

name = Precious:

NPC drive, 4 Ants, titanium 1 (if i remember correctly).

ianh05 · « **Reply #71 on:** July 14, 2010, 08:37:24 AM »

shameless self bump.

AI'd match of course.
:)

Finished my LW FB Drum type bot...

ianh05 · « **Reply #72 on:** July 14, 2010, 09:23:59 PM »

any more suggestions or comments?

123savethewhales · « **Reply #73 on:** July 14, 2010, 09:32:32 PM »

Rather than side panel, I suggest mounting beater bars on the disk sideway.

That, and I think it's unrealistic atm.

ianh05 · « **Reply #74 on:** July 14, 2010, 09:40:29 PM »

yeah i was thinking about using an extender or beater bar instead, will try that. how doesn't it appear realistic? nothing passes through any other part (unlike the FB Drum) and I used no stacking.

123savethewhales · « **Reply #75 on:** July 14, 2010, 09:54:13 PM »

It's impossible for the drum to cut the extender completely and rotate.

ianh05 · « **Reply #76 on:** July 14, 2010, 09:58:44 PM »

yeah i know :P i thought you were talking about the juggler. I'm still thinking of a way to make the drum realistic.

123savethewhales · « **Reply #77 on:** July 14, 2010, 10:00:59 PM »

Yeah and the beater bar suggestion is for the drum too.

ianh05 · « **Reply #78 on:** July 14, 2010, 10:35:26 PM »

Updated Heavy Duty:

Realistic now :)

inplabth · « **Reply #79 on:** July 14, 2010, 10:37:30 PM »

I like the design, but it seems underweaponed for a LW.