That is fine then. Aluminum 5 and steel 5 are the only good ones in their groups Plastic and Tite 5 suck(1, 3 , and 10 don't).
That is fine then. Aluminum 5 and steel 5 are the only good ones in their groups Plastic and Tite 5 suck(1, 3 , and 10 don't).Plastic 5 is better then Tite 3.
That is fine then. Aluminum 5 and steel 5 are the only good ones in their groups Plastic and Tite 5 suck(1, 3 , and 10 don't).
Unrealistic...
And yes, exposed flamethrowers havok so you shouldn't enter that SnS unless you want to lose by havok.
Battery overlaps with air tank.huh
Battery overlaps with air tank.huh
I'm pretty sure he's talking about the weapon blowing through the wheels.
OK, here's the draw:
- Gazea, you are rebuilding R0B0SH4RK's bot R.O.B.. You must make a HW that looks reasonably like R.O.B.
Anyway, it flips whenever the weapon motors are spinning. What can I do apart from getting a wider wheel base?
How is it unrealistic?
Anyway, it flips whenever the weapon motors are spinning. What can I do apart from getting a wider wheel base?
How is it unrealistic?
I thought the hammers passed through the extenders holding the motors on. I think you should do more damage if it's turned round, not sure how, though.
Anyway, it flips whenever the weapon motors are spinning. What can I do apart from getting a wider wheel base?
When you say flips, I'm assuming it flips vertically forwards, not topples over sideways, so it might be due to the AGOD.
Longer back stabilizer.
It flips because the spinners are asymmetric due to AGOD. Rebuild them.
Skirt hinges are bouncy and building something that needs stability is never a good idea. Try rebuilding with smaller weapon bars and attaching the frontal supports with something like a multi extender.
Skirt hinges are bouncy and building something that needs stability is never a good idea. Try rebuilding with smaller weapon bars and attaching the frontal supports with something like a multi extender.
I know that bot is DSL realistic, but is it IRL realistic?
Try to use the weight one way or another.
I know that bot is DSL realistic, but is it IRL realistic?
Probably. It should function fine like that.
And I'd turn the harpoons 90 degrees, so they hit the opponent with the pointy sides. I don't know if they do have normals or not.
Needs more weapons. 3 harpoons aren't going to last long. Try it with vlads and more weapons.
@NFX they don't have normals.
And I thought me using NPCF+Hypnos on IPU was crazy enough.
Go for aluminum extenders and upgrade your beaters.
ROFL 3WD NPC with technos ?
Would be better with hypnos/vlads and 6 harpoons i do think.
Use better wheels.
^What he said^Use better wheels.
AKA vlads or tornados.
(https://gametechmods.com/uploads/images/16748screenshot_356.PNG)
Any suggestions?
Any suggestions?
A Lightweight with a Chassis of a Cubic Shape
LW side hammer
All it does is flip over when the piston is fired. :/
^My computer can barely handle flails and SHWs. UHWs would laaaaaaaaggggggggggggg.
3 ants weigh 4.5 kg more than a battlepack but are much better.
2. You mean to the DSL hammers?Yea, the 70kg ones.
GK, if it used the NCR glitch only the chassis would spin.
gaaaaayy
gaaaaayyWell at least it's not pink.
gaaaaayy
Shut up Naryar. Anyway, from my experiences, 3 NPC fasts aren't fast enough for a HW SnS, I suggest getting rid of a few weapons to free some weight for Drive E-Teks.
gaaaaayyWell at least it's not pink.
Anyways half of those razors won't hit anything because they are on the wrong side of the bot.
Techno Destructo Wheels give the best grip (2.3, IIRC) for the weight (32kg), and its small diameter means a lower ground clearance and better stability. For the lighter weight classes, however, it would be best to use Hypno Wheels or - if weight or havok is a serious issue - Mini Wheels or Wide/Large Ant Wheels.
Ok, I've managed to get the chassis down to 3kgs with plastic 1.3kg? Do show me.
and then put the perm on the halfplate, change the disk for a hexplate and put a skirt or something on the otherside of the perm to protect it.:p
(https://gametechmods.com/uploads/images/90035gut%20ripper%20update.PNG)
Hooray for much cleaner setups! Tite 5, fully realistic.
why the heck does it misses a razor in that pic
(https://gametechmods.com/uploads/images/90035gut%20ripper%20update.PNG)
Hooray for much cleaner setups! Tite 5, fully realistic.
I hope those are normal NPCs, they have tons of HP, while the fast ones have nearly none. Also, you shouldn't have the spinners so wide. A skinny robot or a VS blade will drop straight onto your chassis because they will be too skinny for the spinners to hold away. Tite 5 or not, a small chassis like that can't take much of a beating.
That still looks really strange. Chassis is too tall IMHO.
Angle the chasis back a bit to take advantage of the invincible bottom armor, connect the perm off the attachment point on the front right of the 1/2 sheet with a 20cm extended to center it. This will lower the weapon a bit and make it slightly less awkward.
You also might want to just attach a 80cm alu sheet as a stabilizer off the polycarb sheet instead of the flipper maker/20cm sheet setup you've got now.
Looking excellent now. I do like the skirt on top, that's a nice feature. How often does it come into play?
the skirt on top look ugly :P
If ra2 allows you put 2 normal skirts onstill not as much armour as mine but whatever
needs way more armour for the heavyweight. Double wedges for the middleweight would make it stabler and wedgier.
and IS THAT CB STACKED INTO THE ANTS
Titanium sheets are the way forward for the HW. It just looks too skinny for me tbh xDhe has the weight D:
(https://gametechmods.com/uploads/images/79632IRL MW.PNG)
And finally, an IRL fail! It looks reaaaaally bad. NPC drive, perm for the weapons, tite 3... ish. Can anyone give me any tips on how to skin it well?
What's your weapon extender work ?I have a feeling it's a hex plate
needs more drive
Maybe a shell panel on the front aswellWhat's your weapon extender work ?I have a feeling it's a hex plate
The HW really isn't wide enough.this
(https://gametechmods.com/uploads/images/23192HW VS.PNG)
Upgrade the sheets for the heavyweight.
The weapons look as though they have not enough reach to actually do much for the lw.
Is it invertible? I'd swap the iron for something else personally.
That doesn't look like it's gonna do well :P and whats with the cf entenders
The plows seem to be too steep. It looks like it would be hard to get a bot up there.Looks about the same as Shovel Headed Blockbuster and that didn't have too much trouble.
Didn't that one pop forward though.Good point. Then again, those are the best kind IMO.
Yeah I always thought they did more damage... if built right. It can be tricky.SHB generally got around 7000 on a good hit, maybe more or less.
-A halfsheeti dont remember that rule D:
-A halfsheeti dont remember that rule D:
totally not mine without a shell panel
I shrunk your chassis.(https://gametechmods.com/uploads/images/74777wat.jpg)
I shrunk your chassis.(https://gametechmods.com/uploads/images/74777wat.jpg)
DAMN YOUI shrunk your chassis.(https://gametechmods.com/uploads/images/74777wat.jpg)
LOL we just discussed this on skype... Yours is 25.5, mine is 25.4. :P
Looks painful
Looking pretty good. Seems this Randomiser was a good idea. =D Does it get stuck on its front very often?
atleast you didnt get 1wd poker
looks like it does a nice bit of damage but idk how easily it would deal with popups
Looks decent, how does it do in combat?
Does the fact that it doesn't have a wedge hurt it's combat ability ?
It's certainly an improvement. :P
Nice. How does it do against FSS?
surely angling the discs less will make it harder to trap bots ?
surely angling the discs less will make it harder to trap bots ?actually angling them less makes the bot wider and a lot easier to trap bots. though it does equally make it easier to escape which is why drive is rather important (npc fasts are probably the least you could get away with). and what gaz said
-Triple hybrids will be given a +20kg weight cushion.
-Bots equipped with flamethrowers will be given a +30kg weight cushion. It stacks with the triple hybrid bonus.
yeaaah I got lazy and gave it plastic 5 instead, what's the min height for a thingy ma bob on the underside?
edit: half sheet, that's what it's called