Author Topic: G.K.'s DSL Builds (Read 48683 times)

JoeBlo · « **Reply #20 on:** December 08, 2009, 06:47:07 PM »

Quote from: G.K. on December 08, 2009, 10:33:24 AM

Unfortunately, any more components takes it over the weight limit. In fact, it is claiming it is a MW when I put the smartzone on

have you tried Mads Smartzones v3 ? I have been told they are weightless

Doomkiller · « **Reply #21 on:** December 08, 2009, 07:57:43 PM »

Doesn't look too bad actually.

Allthough, try cuttting the weight by using poly extenders for the weapon ( will make it weaker, so watch out), and by making the chassis smaller so that the wheels are outside of it. Then try to lenghten the skirt on the door hinge. Will make it better.

As for getting under Hazcon, it's quite easy to do with a metal hinge, but u should try making a skirt hinge that can get under hazcon. Not as easy.

good job overall though.

TriTon · « **Reply #22 on:** December 08, 2009, 08:31:58 PM »

Rotate the razors until there flat.

JoeBlo · « **Reply #23 on:** December 08, 2009, 08:51:40 PM »

G.K. · « **Reply #24 on:** December 09, 2009, 12:34:48 AM »

Thanks for the advice everybody, I'll see what I can do.

Naryar · « **Reply #25 on:** December 09, 2009, 02:49:52 AM »

Joe you are not doing it perfectly right :P

That is the real razor's collision mesh. Tetrahedron with a "removed" apex.

JoeBlo · « **Reply #26 on:** December 09, 2009, 03:24:58 AM »

well I was trying to break it down to something more simple but just for you I edited my previous post :P

G.K. · « **Reply #27 on:** December 10, 2009, 04:04:34 PM »

Here's my latest update:

This is actually a completely new build, with a smaller chassis and better wedges. As for realism, the razor just misses the slimbody motor.

I couldn't get all three razors flat, but I got two and made the third as close to flat as I could.

JoeBlo · « **Reply #28 on:** December 10, 2009, 06:33:47 PM »

to make razers flat you position the first one correctly then fire your burst THEN click

it will attach it in mid air,

do the same for the others then go into the garage and back and they will all be back on the extender

G.K. · « **Reply #29 on:** December 11, 2009, 02:01:29 PM »

I've tried that, but it doesn't work for some strange reason. Anyway, the third razor is only one 'rotation' away from being flat, so I'm happy with it.

Virus Bomb · « **Reply #30 on:** December 11, 2009, 03:54:14 PM »

Don't move your cursor when you do it.

G.K. · « **Reply #31 on:** December 12, 2009, 12:36:07 AM »

Nope, still doesn't work.

JoeBlo · « **Reply #32 on:** December 12, 2009, 12:54:20 AM »

you must still be doing something wrong ?

http://beetlebros.gametechmods.com/ra2techs.htm

look down near the bottom, its called eFFe glitching

G.K. · « **Reply #33 on:** December 12, 2009, 12:59:46 AM »

It's not attaching when I fire the bsg and try to attach it.

JoeBlo · « **Reply #34 on:** December 12, 2009, 01:13:27 AM »

did you hover it to were its meant to be as if you are about to attach it

but dont click

hit fire and dont move that mouse at all

as soon as the BSG has hit max arc click without moving the mouse before it retracts

the razor will then be floating in space

The Ounce · « **Reply #35 on:** December 12, 2009, 01:18:03 AM »

I would also like to say that sometimes you can have all of the razors facing the same way without the eFFe glitch, at least for me. You can try different sides.

G.K. · « **Reply #36 on:** December 12, 2009, 01:24:00 AM »

After a bit of trying, I did the glitch while I didn't even mean to.

Thanks Joe.

Can anybody suggest anything else I should do to it?

Pwnator · « **Reply #37 on:** December 12, 2009, 01:29:48 AM »

Well, empty space can still be minimized by shrinking the chassis a bit more. With the extra weight, you can upgrade the armor. :D

The Ounce · « **Reply #38 on:** December 12, 2009, 01:32:13 AM »

You could probably downgrade the sheets to aluminum and add another ant (lol alliteration), or add another razor.

G.K. · « **Reply #39 on:** December 12, 2009, 03:29:53 AM »

Here it is with the new changes. I added another extender and a razor, and spread the razors out more evenly. I also downgraded the skirts to aluminium. I believe the armour is currently 5mm plastic.

Anything else?