Author Topic: Deadgenocide's DSL Showcase of FML (Read 13902 times)

DeadGenocide · « **Reply #80 on:** April 10, 2016, 09:14:27 PM »

I called it Hideous because it was originally supposed to be like Beauty 2 and/or 8.

Tbh though I don't know what to do with my left over weight lmao

Reier · « **Reply #81 on:** April 10, 2016, 09:18:24 PM »

add armor?

DeadGenocide · « **Reply #82 on:** April 10, 2016, 09:21:11 PM »

Quote from: Reier on April 10, 2016, 09:18:24 PM

add armor?

I already Have Titanium 5 and no matter what it refuses to go to Titanium 10.

Anyways why do I have to build to the weight limit? It's already 765 kg

and I'm MW now

Thrackerzod · « **Reply #83 on:** April 10, 2016, 09:30:29 PM »

Quote from: DeadGenocide on April 10, 2016, 09:21:11 PM

Anyways why do I have to build to the weight limit? It's already 765 kg

In a very basic example, a rammer built to the weight limit might have a few more spikes than a rammer built not to the weight limit. The former would have the advantage in that it would be able to do more damage and also have more HP in its weapons.

More generally, a bot built to the weight limit usually has some advantage - stronger armor, more weapons, faster drive, etc. You don't have to build to the weight limit, but not doing so basically means you're pointlessly crippling your robot.

Maybe consider wheelguards or something? I donno.

09090901 · « **Reply #84 on:** April 10, 2016, 09:35:30 PM »

just rebuild the chassis, the current one is massive.

I would go for dual betas. you don't need a ton batteries like in 2.1, so you should have more than enough weight for armor/drive

Naryar · « **Reply #85 on:** April 11, 2016, 04:16:47 AM »

Ya need to rebuild that chassis, make it less tall and set the wedge to a good angle so you can just attach ramplates to a baseplate anchor directly.

And build to weight limit.

DeadGenocide · « **Reply #86 on:** April 12, 2016, 04:54:37 PM »

4 bots

Explosive Discharge
HW VS with Titanium 5

4 WP836Es
2 TWR2s spinning 2 bars with 30kg Hammers on them.
2 NPC Fasts.

Master Bolted
HW Juggler with Titanium 5

No the Irons don't intersect anything

2 WP836Es and 1 Battlepack
2 TWRs for weapon.
4 NPC Fasts for drive.

Sara-Sahra-Sahara
HW Side hammers with Titanium 5

1 Orange
2 Judges for Hammers
2 NPC Fasts
Fire because yeah

Hideous 3 (The second had a useless small wedge and didn't have a piston)
HW Flipper Titanium 5

2 DSL Blacks
2 Medium CO2 Tanks
Long piston.
2 NPC Fasts because that was all i could fit.
2 Betas

Naryar · « **Reply #87 on:** April 12, 2016, 05:34:47 PM »

first one is a clone, but you need to learn how to build so it's fine. anyways it has far too much battery power. 1 WP836E and 2 ants should be enough.

and then i think you should be able to upgrade to 45kg hammers, or maybe to stronger motors. don't use too much weight on extenders/armor either.

Second is another clone but as i said, it's fine at this point in your building. Anyways, it's far too tall, and i'm somewhat sure you used a lot of weight on chassis armor when a juggler doesn't need much armor. Make a less tall chassis (jugglers and gutrippers need a chassis that is low to the ground) and i think you can improve the motors. Drive is fine.

Is the small black spike lighter now ? It was 15kg in dsl2.

Third one, considering the flamethrower shoots in the nozzle's direction, your flamers are in the wrong direction. Put them forward facing so they flame at your enemy instead of your hammers.

I have no idea what is this setup holding the flamers. If it is beater bars it should work.

You are probably spending too much weight on making the wedges steel. You can get rid of some sheets, the wedge will still be as good.

Your dual wedge setup has a problem: while it does make your bot wedgy while inverted, any bot that is of decent height won't fit in between the two wedges.

It appears like it could do with a few more kg's of batteries as well.

Fourth one, it's ok except the poker part is mostly useless. Hybrids are good and all, but the spike isn't helping while the bot works as a flipper, and if the flippers are gone the poker will not win you a match, since it's BW level on a HW match.

If you really want to make it a flipper/poker (although I do not recommend it because of low hybrid effectiveness, it can be done for cool looks) put that poker somewhere else, where it can actually hit opponents. On top of your bot would be better.

DeadGenocide · « **Reply #88 on:** April 12, 2016, 05:41:22 PM »

The Irons are 10 kg in DSL 2.2

And the beaterbars are what is holding the flamethrowers

Naryar · « **Reply #89 on:** April 12, 2016, 05:43:51 PM »

Quote from: DeadGenocide on April 12, 2016, 05:41:22 PM

The Irons are 10 kg in DSL 2.2

And the beaterbars are what is holding the flamethrowers

not the irons. the small pyramidal black ones you have on your discs on the juggler.

and yes, i am quite aware. that's a pretty efficient setup, but you still need to change the facing of those flamers.

DeadGenocide · « **Reply #90 on:** April 12, 2016, 06:06:03 PM »

Quote from: Naryar on April 12, 2016, 05:43:51 PM

Quote from: DeadGenocide on April 12, 2016, 05:41:22 PM
The Irons are 10 kg in DSL 2.2

And the beaterbars are what is holding the flamethrowers

not the irons. the small pyramidal black ones you have on your discs on the juggler.

and yes, i am quite aware. that's a pretty efficient setup, but you still need to change the facing of those flamers.

Yeah they are only 7 kg now I think or 13 kg

Gauche Suede · « **Reply #91 on:** April 12, 2016, 06:41:21 PM »

And why did you replace one of the irons on the juggler with a beater+small tooth ? Wouldn't it make it unstable ?

DeadGenocide · « **Reply #92 on:** April 12, 2016, 08:35:33 PM »

Quote from: Gauche Suede on April 12, 2016, 06:41:21 PM

And why did you replace one of the irons on the juggler with a beater+small tooth ? Wouldn't it make it unstable ?

What are you talking about all of the spikes sideways on the disc are irons.

Naryar · « **Reply #93 on:** April 13, 2016, 03:28:18 AM »

Quote from: Gauche Suede on April 12, 2016, 06:41:21 PM

And why did you replace one of the irons on the juggler with a beater+small tooth ? Wouldn't it make it unstable ?

lol, it's just a lighting effect. you must just have woke up :P

DeadGenocide · « **Reply #94 on:** April 21, 2016, 10:06:26 AM »

next up is best bot HW
Axe From Da Weast
Titanium 5

1 Judge Motors for Axe and Schrimech so bot go Boing! when flipped
2 Z-tek Drive for Zoom!
2 Big Orange Batteries for electricity power Ding!
Underweight because getting close to the weight limit is mainstream (yeah I said it)

Takes SHWs as souvenirs by having the axe hang on to them! (and may break a weapon on the SHW or two)

Puts out Fires! (Figuratively and Literally, put out)

DeadGenocide · « **Reply #95 on:** April 21, 2016, 10:04:07 PM »

starting to get more souvenirs of SHWs

DeadGenocide · « **Reply #96 on:** January 22, 2017, 06:30:41 PM »

Well it's been a while and my first bot has CB2 so if you want the stuff you can critique then skip it.
This is the last version of Not Bushido I'm gonna make.
Manic Not Bushido Havok G-0 "Crazier than the rest, Cancer at it's best."
This bot will do nothing but havok and there is a %10 chance that it will not havok on a hit
Armor Titanium 10

Battleshot:

And For the real stuff
This bot is a Full Body Spinner called Hurri-Bot
Armor is Titanium 5

Battle Result:

Philippa · « **Reply #97 on:** January 22, 2017, 06:45:14 PM »

Dude, can the spinner even move?

DeadGenocide · « **Reply #98 on:** January 22, 2017, 06:57:03 PM »

Quote from: Kurt on January 22, 2017, 06:45:14 PM

Dude, can the spinner even move?

yes it can it has wheels

FOTEPX · « **Reply #99 on:** January 23, 2017, 03:36:41 AM »

Word to the wise - don't put TWM3R's on HW Shell Spinners. Just... saying from experience. Yes, I know, it can move with your control, but the AI sure as sh** can't move it. Get some NPC's on there.