lol
And yes, show us your flippers NOWZ! (I need a new flipper minion since KM left :P)
No, cause you don't build flippers :Plol
And yes, show us your flippers NOWZ! (I need a new flipper minion since KM left :P)
I could be your flipper minion...
Yeah. Whoever gets your bot in the next DSL BTTB is F**ed.
I would use Micro wheels unstead of Hypno's :PSomeday I might re skin the hypnos to look like truck wheels.
What is it named after?
Piglets would be better in this case. Because your opponent's going to be sitting on top of them, and they'll not be moving, and thus dealing no damage.
Piglets would be better in this case. Because your opponent's going to be sitting on top of them, and they'll not be moving, and thus dealing no damage.
They WILL deal damage even if immobile, but barely any.
Especially low DP weapons like that.
Here's an idea, how about you make it not crap? It's just a suggestion.Thank you for that well thought out, hard-hitting post on how to improve his robot, really I bet it will help him a lot in the long run as a builder.
Double post I know. But:Say, is Miss America 1983 free on Saturday? :heart_smiley:
(http://i191.photobucket.com/albums/z67/sirshocks/missamericafinal.png)
Miss America 1983.
Hopefully that's the final incarnation, unless there is another glaringly obvious flaw in it. Bar being crap.
Chassis can be smaller, Dsl's are pointless, use Flipper extenders not angled's, and you only need a TWM3R to drive one of them discs, not a perm.
The chassis wedges at the front.
Here's an idea, how about you make it not crap? It's just a suggestion.
Why not just use up the weight by raising the armor? Or make the skirts steel? Or dump in 2 more ants?Is "I've sent it now" a valid excuse?
(http://i191.photobucket.com/albums/z67/sirshocks/Letthemalltorque.png)Oh.
This is what I sent for my challenge with TRB. It's underweight and too fast for it's own good. I predict it'll last 10 seconds before hitting the blade in the middle and being sent flying. But I couldn't make anything better, and sending a pre built bot seemed a bit of a cheat in my eyes.
The craptacular pun I am immensely proud of though.
My lack of any building skill really shows. :P
Try angling them so they run along the floor :PWeapons touching the ground do little/no damage.
The burst motor fires upwards the comes down to clamp if thats what you mean.Change your drive setup to only 2 npc fast with technos instead of hypnos, that might help.
In testing it just loves to flip over when it grabs something. Then it can't self right. Bah.
Ehh, flails are so 2009. Now-un-days, it's all about dual-layer weaponry.
(https://gametechmods.com/uploads/images/72008better.PNG)Looks great! I can imagine the discs being quite good at catching hold of axes in their ridges and wrenching them off.
Tweaked it a bit.
Two things:LOLOLOLOLOL
1) The rear assembly was redone by my cat.
2) It's downgraded to npc normals now. Oh well, more hp, right?
I'll try it against some axes later GF, see what happens :P
Two things:Not this crap again...
1) The rear assembly was redone by my cat.
2) It's downgraded to npc normals now. Oh well, more hp, right?
I'll try it against some axes later GF, see what happens :P
Two things:
1) The rear assembly was redone by my cat.
2) It's downgraded to npc normals now. Oh well, more hp, right?
No. You will actually have to do something besides breathing to make it work.
Torque-Reaction Vertical Spinner.
(https://gametechmods.com/uploads/images/78111TRVS.png)
Well, it works but isn't that good.
Editing the gmf for the wheel covers now.
lol @ second row of text XD
And your point is?lol @ second row of text XDYOU'RE 13, DAMMIT.
Try using 60cm shell panels instead of CF extenders.
The chassis needs more armor, especially with what it has now. Scorpion is right, you don't need the DSL bars: the main extender is safe where it is already. Get rid of the bars and try to get at least titanium 5 on it.Or take the Refraction Chassis and put the rest of the stuff on with the half sheet and everything.
Could you make a video on how it works?
Could you make a video on how it works?
Here, have one of the first DSL bots I ever made. I made this little number ages ago when trying to make a walker. The end result was this,What is this ungodly thing
(https://gametechmods.com/uploads/images/17043screenshot_46.PNG)
(https://gametechmods.com/uploads/images/92423screenshot_47.PNG)
It actually moves surprisingly well. It has a tail so it can reverse.
I think I made that wretched extenderwork so I could align the pistons easier.
Bisector hammerrrrrBingo. :D
They're the same apart from shape.
Robot X sais are longer IIRC
Robot X sais are longer IIRC
(https://gametechmods.com/uploads/images/78242screenshot_52.PNG)
Oh my god. So... many... things... wrong... with... that... F...S...S... *dies*TWM3R2. It doesn't take an eternity to spin up. Iirc, the next step up is an Etek isn't it?
Anyways, I can definitely see how that resembles Mauler, though my Sheck Spinner expertise are making it hard for me to look at it for more than a few seconds without turning away in disgust. :P My bets would be on Delicious Hot being more successful in combat, thanks to better chassis protection. Out of curiosity, what weapon motor is Disgusting Cold using? Maybe your extra weight could go there.
TWM3R2. It doesn't take an eternity to spin up. Iirc, the next step up is an Etek isn't it?
I would have made a full shell spinner, but as I'm entering a IRL style tourney, I don't feel like treading the blurred line between "IRL style" and "Cheap
But then it wouldn't be named after a Bonzo Dog Doo Dah Band song. Plus I don't want to be too obvious
(https://gametechmods.com/uploads/images/93648MEDIC.PNG)
You'll be seeing that a lot.
Skinned parts are fine for your BoF bots :D
Yes, I'm back.
(https://gametechmods.com/uploads/images/4251screenshot_73.PNG)Reminds me of my clash kewbs entry.
Finally skinned him. Not too bad if I say so myself. I'm somewhat proud I managed to work out the texture map for the flipper segmentgod I have no life.
Now to wrap him and his friends up and send them to Badnik
Right, there are two things for you to guess.1. Driedel thing
(https://gametechmods.com/uploads/images/23817guess.PNG)
1) What it's going to be once I've skinned it.
2) What paint thinner I was sniffing in order to come up with the idea.
The first one looks like NFX's Valid Query 2 kinda.No it doesn't
Very Nice. Is James invertible? (this applies to you too fotep)
(https://gametechmods.com/uploads/images/86470king.PNG)pop-up bait :trollface (implying my bot isn't the only one that's not a pop-up)
Now with added sponsor.
Looks nice, good to see a walker.
Looks nice, good to see a walker.
How is that a walker? It just a bot with weird looking wheels.
lol a crawler with a FrenzY hammer. Cannon fodder.Next to my failish true pop-up. :P
lol a crawler with a FrenzY hammer. Cannon fodder.
Looks like Mega Hurtz. Cool.Terrorhurtz. :trollface
EMPTY SPACE!
There's a bigger maxsphere than the one which comes with DSL?
There's a bigger maxsphere than the one which comes with DSL?
Yeah, I think there is one in the downloads section. Might be a custom component? The maxsphere can be eliminated altogether if i remember correctly. Waaaaaaay back on the old forums, some dude was making a scale replica of a battleship in RA2. The thing was so huge. It's too bad the pics were deleted with the old forum, and I haven't seen that guy around since the switch.
Though, my memory could be wrong. :P
Awesome! Thanks for refreshing my memory. Not to veer toooo far off topic but you can go crazy with the maxsphere eliminated Conraaa.
Apanx. Drops by on occasions.
Also, here's the battleship:
Dp:
(https://gametechmods.com/uploads/images/405245182.PNG)
Possibly for NQRW
(https://gametechmods.com/uploads/images/46057gummypainted.PNG)I remember that game! It was amazingly good fun! =D Great skin job.
One paint job later.
Admittedly, the Croc sponsor was more of an afterthought. I asked myself "What is crocodile related that I can shove on this as a sponsor that isn't my little pony?"(https://gametechmods.com/uploads/images/46057gummypainted.PNG)I remember that game! It was amazingly good fun! =D Great skin job.
One paint job later.
Sometimes it happens with you attach it to a motor. Any particular reason it's on an NPC Fast? I can imagine that's possibly unrealistic if it goes all the way around. Remove the sledgehammer and extender, Pause, go into the Test Garage and back, keep the game paused, attach the Extender, switch tabs and back, attach the Sledgehammer, then unpause the game. That should keep it from AGODing. If not, the repeat the process, but remove and reattach the motor as well.1) Well, King Crab followed exactly the same principle and that was accepted.
(https://gametechmods.com/uploads/images/85279ydlm.PNG)
My possible entry for Steel Warzone.
Have to admit Iblatantly copiedtook inspiration from Ion
Wait NFX entered Ion? Dammit. (http://www.visualphotos.com/photo/2x4160768/throwing_paper_into_the_trash_bin_1827674.jpg) Time to think of something original.
As long as that doesn't spin, it should be awesome! o:
I'm still trying to figure out which way to wire this thing to make it most effective.My advice on how to wire your bot.
battery stacking is forbidden in DSL...I do it all the time :mrgreen:
(https://gametechmods.com/uploads/images/80581rts.PNG)
A prototype for Steel Warzone.
It's unrealistic in the sense that the razors just clip the wheels. If you look closely. And at the right angle.
RULES:
.DSL HW
.Unrealistic
.No Multibots
Yeah, could do with moar chassis protection, though, I don't see there being that many specialist gut rippers in steel warzone, so you COULD get through it.Go to the signup thread, my bot is for download on the first page.
Finished skinning the chassis. 2048*2048 skins ftw! Freeziez will love me. A 16,000kb bot file.Marginally misaligned flippers are marginally misaligned.
(https://gametechmods.com/uploads/images/84182screenshot_83.PNG)
With inspiration from this videoI'm not sure what to do with the flippers. Skin them white? Blue?
Well built and all, but that's not even DSL realistic. Your middle sledgehammer is entirely stacked within the other two. As lax as the realistic rule is, that's a pretty blatant violation.
That looks really good.
Dammit you've made me want to learn the trov glitch now =PI have some bot builds on my youtube where I use it.
I've started listening to classical music now! God help me.Classical is pretty good bro.
(https://gametechmods.com/uploads/images/64911Sarabande.PNG)
On the bright side I have more names to work with now. I was going to call this one Sara's Bande but that was too punny, I thought.
You guys thought I ran away, didn't you? :PA rammer on hinges? Cool, hope your's work better than mine.
I thought i'd ease myself back in after me not playing for a while.
(https://gametechmods.com/uploads/images/46546GUW.PNG)
For War of The Giants. Because a flipper for a low walled arena? So original.
It needs one of my world famousblowhandpaintjobs and some way to eat up an extra 100kg. 2/3 hinged spikes on the front maybe?
Playing around with ideas for RIMP RIMP RIMP RIMP RIMP RIMP RIMP RIMP RIMP RIMPFor MW,build a juggler. :trollface
(https://gametechmods.com/uploads/images/1580planetery.PNG)
Trying to think of the best way to protect those poly extenders holding the iron spikes on.
Also why does every MW I make gravitate* towards that design?
*no pun intended.
Now I need to find a LW. I wanted to use Johnny On The Monorail (https://gametechmods.com/forums/index.php/topic,7511.15.html) but i'm not sure if Craaig would count Rammers and Wammers as two different types.
I like them, particularly that HS.
In other news, I have no idea how a juggler is trolling.
A wedge!That should be its name lol. Glad to see some interest.
DP: My hopeful BW entry is a blatant reskin and i'm fine with that.
(https://gametechmods.com/uploads/images/18808screenshot_10.PNG)
The only other style of FS like that I'd seen in DSL before was Night Horror before I built Turbine...now they're everywhere xD
(https://gametechmods.com/uploads/images/50178screenshot_27.PNG)The only other style of FS like that I'd seen in DSL before was Night Horror before I built Turbine...now they're everywhere xD
Don't remember it! :D
Yeah, but Lighter Shades of Dark Grey comes a close second XDNah fool, t'was Shovel Headed :P
I'm sorry but Flying Monster was awesome.Yeah, but Lighter Shades of Dark Grey comes a close second XDNah fool, t'was Shovel Headed :P
Can we agree to Seeing Stars?I'm sorry but Flying Monster was awesome.Yeah, but Lighter Shades of Dark Grey comes a close second XDNah fool, t'was Shovel Headed :P
Lookin' good. Scares my only existing CW (prototype from when JB annoucned CCV might be CW o.o) a great deal. I need to build a decent one, and soon. :LAlu 80cm angled. I'll see if I can upgrade them.
Are those skirts steel or al? If al, I think you could upgrade them to tite and still be in the limit.
Lookin' good. Scares my only existing CW (prototype from when JB annoucned CCV might be CW o.o) a great deal. I need to build a decent one, and soon. :LAlu 80cm angled. I'll see if I can upgrade them.
Are those skirts steel or al? If al, I think you could upgrade them to tite and still be in the limit.
No one got the Mitcheck and Webb reference?Sorry, more of an Armstrong and Miller watcher.
No one got the Mitcheck and Webb reference?If you named it Number Wang might have.
No one got the Mitcheck and Webb reference?I did, but I didn't think it was worth mentioning. =D
I got the Mitcheck and Webb reference but I only saw it 5 minutes ago. :gawe: The Event had just happened.
Is there parts of the weapons that go through the plow from behind?
Looks good. You could upgrade the rear stabilisers with the remaining weight. Also, that looks like a lot of weight for one piston, does it have enough kick to deal an adequate amount of damage?
No idea! Like most things that I build and forget about, it's currently untested. I'll boot up 123Ai later though and see what happens I swear.
Looks quite a bit like one of my recent MWs...
After testing it in 123ai, I think so!
It also needs some piston protection as that will get taken off if anything goes over it.
I'm not sure I know enough to give advice on how effective it is, but it sure as heck looks cool. What piston are you using?
MOAR WEAPONS
(https://gametechmods.com/uploads/images/4211peeweeherman.png)
Plastic 10
They are all names after characters in British comedy sketch shows... Close, Try again!
LW looks alright, not sure if the central hammer is unrealistic or not. It's two 60kg hammers, as much as I would have loved to get a third one in there!
LW looks alright, not sure if the central hammer is unrealistic or not.why would it be unrealistic ? it would just be a steel bar of sledgehammer material irl
I'm not sure about the other two but Sir Digby Chicken Caesar is from That Mitchel and Webb Look
All of his robots are tied around Monty Python's Flying Circus. The Spanish Inquisition (the one nobody expects) gave that away for me.
I made this for Naryar's tourney...It's Nary trying to keep me out of his tourney :P
(https://gametechmods.com/uploads/images/17437screenshot_66.PNG)
...Then I read the rules. Which outlaw TRFBD's. Dammit.
gayest name ever
Steel Warzone 2 prototype ahoyti 10 on a mw ? isnt it a bit overkill or does it have so tiny of a chassis that the difference between pl 1 and ti 10 isnt much anyway ?
(https://gametechmods.com/uploads/images/49591screenshot_10.PNG)
I'm proud of that for some reason.
Good news: My other computer is working so I have Propaganda back.
Bad news: It Havoks uncontrollably when in the same arena as anything w/ a skirt hinge/metal hinge. Is this just me? Has anyone else ever had something similar? Any fixes?
My entries for my sumo tourney. Please note they still need to be prettyfied (See: Skinned to death). I'll do that tommorow.I don't really DSL but I quite like the look of Richard Hammond's Nightmare (it has nothing to do with the fact that I came up with the name)
(https://gametechmods.com/uploads/images/2416screenshot_79.PNG)
(https://gametechmods.com/uploads/images/33849screenshot_78.PNG)
(https://gametechmods.com/uploads/images/8716screenshot_89.PNG)
i'm gonna ripoff this asap and make it better.Oh, it's on.
i'm gonna ripoff this asap and make it better.Oh, it's on.
Lol if you are talking about a vote challenge on who can make a better looking DSL HW plane, sure I can handle that.i'm gonna ripoff this asap and make it better.Oh, it's on.
COME AND FIGHT ME THEN ! I SHALL BREAK YOUR BODY, YOUR MORALE AND YOUR SOUL, AND I WILL PROVE YOUR INFERIORITY TO THE WHOLE UNIVERSE !
Naryar, even a small kitty is scarier than you. Why are you still acting like that and nobody is still afraid?i'm gonna ripoff this asap and make it better.Oh, it's on.
COME AND FIGHT ME THEN ! I SHALL BREAK YOUR BODY, YOUR MORALE AND YOUR SOUL, AND I WILL PROVE YOUR INFERIORITY TO THE WHOLE UNIVERSE !
Naryar, even a small kitty is scarier than you. Why are you still acting like that and nobody is still afraid?i'm gonna ripoff this asap and make it better.Oh, it's on.
COME AND FIGHT ME THEN ! I SHALL BREAK YOUR BODY, YOUR MORALE AND YOUR SOUL, AND I WILL PROVE YOUR INFERIORITY TO THE WHOLE UNIVERSE !
Hmm...maybeNaryar, even a small kitty is scarier than you. Why are you still acting like that and nobody is still afraid?i'm gonna ripoff this asap and make it better.Oh, it's on.
COME AND FIGHT ME THEN ! I SHALL BREAK YOUR BODY, YOUR MORALE AND YOUR SOUL, AND I WILL PROVE YOUR INFERIORITY TO THE WHOLE UNIVERSE !
Who are you to judge my ham, and what makes you think I'm trying to scare anyone ?
I am merely seething with battle thirst and I express it in a suitably hammy way. Do you even understand these feelings ?
Maybe you should hurry up and submit a bot for our challenge? ;)i'm gonna ripoff this asap and make it better.Oh, it's on.
COME AND FIGHT ME THEN ! I SHALL BREAK YOUR BODY, YOUR MORALE AND YOUR SOUL, AND I WILL PROVE YOUR INFERIORITY TO THE WHOLE UNIVERSE !
You should've put the Don't Panic face from The Hitchhiker's Guide To The Galaxy. Then that'd be awesome.why I said this:
needs to be skinned like GK's bots
You should've put the Don't Panic face from The Hitchhiker's Guide To The Galaxy. Then that'd be awesome.
Oh, okay. +1 RespectYou should've put the Don't Panic face from The Hitchhiker's Guide To The Galaxy. Then that'd be awesome.
It's on the bottom of the bot.
Ooooooh., neat. Do you really need the back plow on the CW.
How else would you get 3wd on a non SNS MW? And don't say strafing because that's highly homosexual and a pain to ai.Thank you merciful one!
How else would you get 3wd on a non SNS MW? And don't say strafing because that's highly homosexual and a pain to ai.Thank you merciful one!
How else would you get 3wd on a non SNS MW? And don't say strafing because that's highly homosexual and a pain to ai.>rage III
my rhino would eat yoursBut then it would sh** rainbows for a week because it just ate the cutest bot ever.
it'd be Brother Of Whyachi's Breakfast.hahahahaha
lol tread popupLaunch Platform was forever ago? :dumb)
Last time someone tried that was forever ago IIRC
(https://gametechmods.com/uploads/images/52102screenshot_25.PNG)
For the Ra2lympics. Yes I know it's technically underpowered, but it doesn't effect it.
IT'S TOO CUTE FOR RHINOKINDOverpressure no longer exists but i have another flipper that will replace him
It'd beat Mystic2000's Overpressure then i'd think it'd be Brother Of Whyachi's Breakfast.
Possible Lw for BB6. Pending skinning.sup Marked Target, how you doin'
(https://gametechmods.com/uploads/images/72296SFTW.PNG)
I do hope the name isn't an omen.
Possible Lw for BB6. Pending skinning.
(https://gametechmods.com/uploads/images/72296SFTW.PNG)
I do hope the name isn't an omen.
Lel, hi Venko. That thing's insane.
dude i thought that bot was as's work
How many points are wheel tiles worth?9 Each, i think.
Provisional entries for Father and SonNice. Brilliant asdfmovie9 theme by the way.
(https://gametechmods.com/uploads/images/87138father and son.png)
I just need to skin them and they'll be good to go.
Wait, it's in asdfmovie? I thought it was just the oldest dad joke in existence.The recently released one. Not sure if trolling, sarcastic, or unaware of asdfmovie9.
If you haven't heard that one before Av, your dad really needs to step up his game.Nah. We dont have terrible jokes like that in the house.
Kind of bland tbh. Add some wheelguards or something to make it more interesting.i assume you don't know of the legend that was malc 1.5
Kind of bland tbh. Add some wheelguards or something to make it more interesting.i assume you don't know of the legend that was malc 1.5
Those blades on the side didn't do much for guarding :dumb)Kind of bland tbh. Add some wheelguards or something to make it more interesting.i assume you don't know of the legend that was malc 1.5
To be fair Malc 1.5 did have wheelguards
Bugger, it did. Do you have an active weapon rule?No but I wouldn't recommend going in with a plow. That's not much fun. There are lots of different things you could do with that depending on what the insides are like