https://gametechmods.com/forums/dsl-tc-showcases/bildschirms-bots!-(also-hi!)/msg750358/#msg750358
hello and welcome
you have so many cool bots here but try not post them all at once as its a lot in one go for our brains to digest!
Hiya my dude and welcome.Thank You! :3
Ill do a full rundown of the bots once i get home but from wgat i can see you have a plethora of creative ideas keep it up. Big whipper and death of wheels are stand out bots to me. My only issue with the other bots is theyre rather messy on creation. But certainly great for a newcomer. Best of luck and i hope you stick around
big whipper is p neato, the rest are cool too but could do with little touchups like a skin or making the bot much smoother with extenders and such. the flipper is rad too but would be much better if the panels were moved inwards so there's no ugly gaps
also if you do choose to post a lot of bots in one post, try and put most of them in spoilers so it doesnt kill all our browsers
Eww.. Mechadiscs... We try to keep away from them (or limit them to one mecha per one), otherwise, the bots are great for a newcomer!
From what I'm seeing, these robots aren't that bad for first attempts, but there needs to be some definite polish in them before they'd be considered great. Stuff like that turtle shell spinner (which JDG would approve) and Big Whipper are great off the bat, if a lil' bit weaponspammy, but others like half the VS'es and the tri-mechavore HS wouldn't be considered IRL in tournaments due to intersecting axles and the like or motors going into the weapon, weapons into weapons and so-on.
That being said, I see potential in your robots. Hope you continue to build and improve. ^_^
Double-Sided Terror is better than most bots because of it being a creative and it looking like something you would have seen on TV in the 2000s. If you want "Red Dead" to really throw robots around you can make it a bar spinner with two giant hammers.
What do you mean by half the VS? :o1: Half of the VS'es. Thank my bad grammar. :V
I heared that it would be ok then the motors are sticking out the chassis (like weaponmotors)
I The chains arent touching eatchother too! :3
How should I build Bots then? I mean I tried to make them so efficient as possible and still make a little bit kosmetic. What should be my tactic then? :o
What do you mean by half the VS? :o1: Half of the VS'es. Thank my bad grammar. :V
I heared that it would be ok then the motors are sticking out the chassis (like weaponmotors)
I The chains arent touching eatchother too! :3
How should I build Bots then? I mean I tried to make them so efficient as possible and still make a little bit kosmetic. What should be my tactic then? :o
2: Motors sticking out the chassis are okay in IRL as long as you give them adequate support or look like they could be bolted onto somewhere IRL. Something like Red Dead may require some extra supports to make it not look like it'd fall and break or something.
3: Even with that in mind, I don't think a flywheel in the center of the robot is even possible IRL. Personally 2 flywheels would be fine enough IMHO, its damaging enough as is.
4: My personal design ethos? Make them look as good as possible while being capable of fighting. While people have different opinions of IRL, its best if you try and experiment around to see what works best for you.
If anything doesn't make sense, then sorry about that - I'm not the best when it comes to wordings. :V
VS is an acronym for Vertical Spinner.
HS would be horizontal
FS is for the face. Like having a small grinder on the front.
SnS is for Sit and spin.
It's actually illegal to write spinner in some Eastern European nations, so we created these expressions.
dreamcast is ****ing with you, i'm pretty sure
i'm a big fan of red dead, revenge of the turtle and big whipper. also props for using my disc covers
Dayum your bots looks nice, welcome to the forums :dance:
Hey
Nach so vielen Jahren jemand Anderen aus Deutschland hier zu sehen ist irgendwie merkwürdig :P
Welcome to GTM I guess. You've got some nice stuff going on there. Keep up the good work dude ;)
you have some lovely bots :D welcome to the forums ^^
Nice under cutter design! I would switch the round steel extender on the weapon to an axle extender
Hi all!
I made a new crappy bot! I wanna share it because i made a cool cover for it!
Look!
Thats mostly all! I will show in the next post the power of the mighty Revolution Master!
Bye for now!
Hi all!
I made a new crappy bot! I wanna share it because i made a cool cover for it!
Look!
Thats mostly all! I will show in the next post the power of the mighty Revolution Master!
Bye for now!
I'd actually drop the 6 mag down a notch and use a drum for an axle. Also quick word of advance, don't put your bots in spoiler tags
Hiiii!!
I made a break from that game but now I'm back with waaaay better bots! :thumbup
Look for yourself! : p
Hiiii!!Nice! Really nothing else to say.
I made a break from that game but now I'm back with waaaay better bots! :thumbup
Look for yourself! : p
eco
Hiiii!!
I made a break from that game but now I'm back with waaaay better bots! :thumbup
Look for yourself! : p
This is an improvement significantly. Well done. But, I'd recommend you have only 2 black batteries, the 20kg ones, this would weigh less and still be enough battery life for the bot. The teeth, whilst 8 small is ok, I'd recommend you use 4 large this imo would look better and deal similar amounts of damage, you can also use a normal perm instead of the reinforced perm, this would also save you weight and be ok due to the supports you've made for the weapon. Colour is also something I'd add to the bot as just plain white is very dull.
Like I said before this is a big improvement, and I hope you continue at this speed of progress.
PS: Don't put the images in spoiler tags, it makes load times kinda iffy.
PLEASE GET A SCREEN SHOT OF THISxD
IT LOOKS GREAT!
It's... on it's side?
Looks like a hybrid of both IRL undercutters, and some old stock robots. I'm guessing the AI can't drive worth a darn. Overall the robot looks good, but I would make it more solid by adding some extenders on the back that connect to the body pods.
You really have improved alot. Love the colour scheme
expect I still had your bots (Spinougi and Lil Kill)Yay, it would be nice when you could send me the bots!
Hey, that's a neat looking Stance Stance Revolution tribute, I really like how it came out here.
I like the use of the colsons on the drum. The bot itself looks kinda messy to me though tbh.I actually use the tires to cover the motor :3
looks really clean. i like the drive.Glad You like it!
Also, I made a bot I didn't posted here.That's pretty cool. I think that one is better than Primeval's Ruby Rose bot. Anyway, what RWBY bot are you going to do next?
Here is Ruby Rose!
[ This attachment cannot be displayed inline in 'Print Page' view ]
4xNPC Drive
Servo Crescent Rose (Her Weapon)
The weapon isn't a custom item, its just a bunch of items thrown together xD
Hope You like it!
that's some clever component use on the weapon.
bot itself looks pretty clean, good job :thumbup
I dont think that I will build a Rwby themed bot in the near future :oAlso, I made a bot I didn't posted here.That's pretty cool. I think that one is better than Primeval's Ruby Rose bot. Anyway, what RWBY bot are you going to do next?
Here is Ruby Rose!
[ This attachment cannot be displayed inline in 'Print Page' view ]
4xNPC Drive
Servo Crescent Rose (Her Weapon)
The weapon isn't a custom item, its just a bunch of items thrown together xD
Hope You like it!
lmao thats funky
Nice, I am submitting 5 as well( redrum, vortex, tsunami, swamp thing, and killer pumpkin) and you got some clever designsWell... who isn't to be honest? xD
those are quite nice
The Bots that will paritcipate in MM2!What is the name of the full-body spinner multibot?
[ This attachment cannot be displayed inline in 'Print Page' view ]
They are the snowcogsThe Bots that will paritcipate in MM2!What is the name of the full-body spinner multibot?
[ This attachment cannot be displayed inline in 'Print Page' view ]
Hio!
I built this bot for OW3! I hope it does well!
[ This attachment cannot be displayed inline in 'Print Page' view ]
When anyone has questions, critique or questions, let me know! :3
Welp, end of greedee's tourney xDHonestly, you can still enter it to other tourneys, or put it in the bot exchange
It got disqualified in the qualifieres
Welp, end of greedee's tourney xD]
It got disqualified in the qualifieres
Actually, OW3 has more than 112 entrants. Since the limit is 112, that bot got rejected along with some others to make spaceWelp, end of greedee's tourney xD]
It got disqualified in the qualifieres
Why? Stacked teeth? Not that IRL?
Actually, OW3 has more than 112 entrants. Since the limit is 112, that bot got rejected along with some others to make spaceWelp, end of greedee's tourney xD]
It got disqualified in the qualifieres
Why? Stacked teeth? Not that IRL?
I checked the OW3 spreadsheet and it said that Greedee made it in in OW3 by winning the qualifiers.
I blame Mitch entirely :pI checked the OW3 spreadsheet and it said that Greedee made it in in OW3 by winning the qualifiers.
Oh, i should mention that! Greedee got in through a miricle because pokebros bot had problems and got rejected, so lucky for me :p
I blame Mitch entirely :pI checked the OW3 spreadsheet and it said that Greedee made it in in OW3 by winning the qualifiers.
Oh, i should mention that! Greedee got in through a miricle because pokebros bot had problems and got rejected, so lucky for me :p
I blame Mitch entirely :pI checked the OW3 spreadsheet and it said that Greedee made it in in OW3 by winning the qualifiers.
Oh, i should mention that! Greedee got in through a miricle because pokebros bot had problems and got rejected, so lucky for me :p
I support Greedee > Poke :gunz:
Hiiii!Real question is it faster than Killer's bots?
Is it a Ship? Is it a Rocket? No! It's RocketShip!
[ This attachment cannot be displayed inline in 'Print Page' view ]
Don't worry, removed the bottompanels so you san see the internals! :P
How should I know? :really_makes_you_think:Hiiii!Real question is it faster than Killer's bots?
Is it a Ship? Is it a Rocket? No! It's RocketShip!
[ This attachment cannot be displayed inline in 'Print Page' view ]
Don't worry, removed the bottompanels so you san see the internals! :P
Oh yes, the bot, the myth, the legend MEMEthathasgottobethefastestbotevermadeinIRL.It could be MEME from Kix.
RocketShip is mainly build that way because it can process that speed without falling over
Does it Have 4 E teks for drive?RocketShip is mainly build that way because it can process that speed without falling over
Shoosh my bot is faster
They all look as of they have the potential to be unique and awesome. I like them all, particularly the woke drive first bot, the E-tek drive top flipper, and the flipper with VS (also guessing that one was inspired by what Redalert said)The third bot was an idea of mine, i wanted to make a bot that rams/ flips the opponent and spins one time to strike the opponent mid-air and for the other bots. I just tried different stuff. I even tried a setup with 8 twmr2 motors but it got too huge for not being able to cover it all with plates! :o
I am in love with that E Tek drive flipperMe too but it weights waay too much and getting rid of motors kills the purpose of this bot so yeah :P
Hi Everyone!Nice bot. I prefer if the support is longer and thicker tbh, as it doesn't cover the 259 disc axle completely. Other than that, it's pretty awesome and one of your best imo
What happens when you combine:
2 x132 perms
2 x npc fasts
Tons of custom skins
Anime
Thats what happened! :o
[ This attachment cannot be displayed inline in 'Print Page' view ]
The bot is pretty much just drums xD
I like Yuno, i like to experiment with .gmf data, perfect! xD
(Fun fact: there arent any extenders in this bot xD)
When you have questions or critique, please let me know!
When you just like it and dont want to write, just leave a like if you want! :P
(Feel like a youtuber now xD)
Actually it has drums as supports that wont turn with the weapon. On those drums are dsl bars as weapon support, just so you know :PHi Everyone!Nice bot. I prefer if the support is longer and thicker tbh, as it doesn't cover the 259 disc axle completely. Other than that, it's pretty awesome and one of your best imo
What happens when you combine:
2 x132 perms
2 x npc fasts
Tons of custom skins
Anime
Thats what happened! :o
[ This attachment cannot be displayed inline in 'Print Page' view ]
The bot is pretty much just drums xD
I like Yuno, i like to experiment with .gmf data, perfect! xD
(Fun fact: there arent any extenders in this bot xD)
When you have questions or critique, please let me know!
When you just like it and dont want to write, just leave a like if you want! :P
(Feel like a youtuber now xD)
Alao, for anime reference part, guessing this is a reference to that yandere from Future Diary
BoopCool eggbeater. I like all the reskin works you did for it
[ This attachment cannot be displayed inline in 'Print Page' view ]
Cant be bothered to write something long for it :P
This bot has like 25 custon skins and you nearly cant see any of them! :/
Just so you know: all the black is extremly shiny and the yellow is just shiny, welp, waste of time xD
Byyye :P
Doublepost time! :3Holy Jesus that looks good, will it be entered in any tourneys or is it just for showcasing? Either way I'm impressed
Boop
[ This attachment cannot be displayed inline in 'Print Page' view ]
Cant be bothered to write something long for it :P
This bot has like 25 custon skins and you nearly cant see any of them! :/
Just so you know: all the black is extremly shiny and the yellow is just shiny, welp, waste of time xD
Byyye :P
Holy Jesus that looks good, will it be entered in any tourneys or is it just for showcasing? Either way I'm impressedOf course it will fight in some tournaments when it gets an oppertunity! :flex
Hi!Awesome. It's a very unique shell. And for custom component, I will willingly accept it in any tourney I host, as long as the custom component is not too OP
After 3 days roughly, this Cruiserweight was finally finished!
[ This attachment cannot be displayed inline in 'Print Page' view ]
I wanted to make a bot who heavily uses custom components since i see so much potential in custom components!
Note: I didnt changed the hitbox of the custom components to get accepted atleast in a few tournaments. :P
The Inner Gear Are Drums; the Gearwheel (i dunno how to call this), Top Panels and Bottom Panels are DSL disks and so on. :P
Weapon is powered by a 4mag and the Drive is 2twmr.
When you have questions or anything else, please write it in the Comments below! :3
Have a neato day or so! :3
I mean, it'd be nice to make it... legal.Sorry, i got kinda bored with the standard components and i may just change minor stuff from now on
Like it looks cool n all. But I think it be nice to challenge yourself and try it with proper components.
I'll be honest, these custom shell pieces would be neat for IRL building...something for you and possibly Kix to look at/work on together?I mean, it'd be nice to make it... legal.Sorry, i got kinda bored with the standard components and i may just change minor stuff from now on
Like it looks cool n all. But I think it be nice to challenge yourself and try it with proper components.
Otherwise i didnt changed that much stuff in there, i just wanted a round drum thats otherwise pretty much impossible to do it good :U
About Kix, since you are not in the server anymore, he has retired from RA2. He get burnt out, and erased RA2. He moves on to RR2 nowI'll be honest, these custom shell pieces would be neat for IRL building...something for you and possibly Kix to look at/work on together?I mean, it'd be nice to make it... legal.Sorry, i got kinda bored with the standard components and i may just change minor stuff from now on
Like it looks cool n all. But I think it be nice to challenge yourself and try it with proper components.
Otherwise i didnt changed that much stuff in there, i just wanted a round drum thats otherwise pretty much impossible to do it good :U
Hey, V-Schirm here! heckI like the look of the bot, but I don't like the lack of weapon support and how hollow the weapon is. Still looks good tho.
I made a new bot thats worthy too look at it!
[ This attachment cannot be displayed inline in 'Print Page' view ]I like this Bot alot! Even if i missed the support from underneath the weapon (IRL it would fall out, sad) I still like it!
- Its an Extenderbot
- It has one custom item, where is it? (the weapon you dunce :P)
- Everything else is Custom skinned
- It took me 2 days (kill me pls)
- Its a cool weapon idea (Totally useful *cough*)
This is the first time I actually really adore the skin i gave my bot. It was a pain in the butt to make so many components but heeeeeey, its Bild and Bild does that kinda stuff, alright? xD
The weapon is powered with an invisible flatmotor, connected to an invisible extender.
8 flatmotors drive that bot since i wanted to try it and no other strong motor fitted in that place. Lemme tell you, its hella fast and I'm surprised! :3
I think I'm done with the explinations :o
I hope you like this bot as much as I do an dwhen you have questions, just write :P
Bye and have a neato day! :P
We get it, you want to win BOTM againEh, I would accept brand new components tbh as long as they have same stat or weaker than an existing component. Bild said that component has same stat as Minion disc, so that stat is acceptable to me. Though tbf, I think I won't accept the design tbh because it would just break in few hits or be ineffective IRL
Bot looks awesome btw, even if it's illegal in tourneys.
Yeah, gotta agree here. While I love, love, love the skinning and while the disc idea seems cool, it just seems it would fly away and just get pushed off if this was attempted IRL. Although if anyone who has done something like this and made it work, then I would allow something like this. But as of now? Sadly, I wouldn't.Well, as I said before, I showed this bot, as well as the Discord only sketch pics Bild made of the weapon system, to other servers after I got Bild's permission, and someone got inspired in one the servers. That person actually decided to make a BW with that concept
What're those baseplate anchors doing there, are they decoration or something?
Do you find TWM3Rs to be sufficient weapon motors? I've have thought that they'd be too anaemic for HW.
Other than maybe the custom wheel on Kanna not being wrapped properly being the only thing that bugs me, it's solid and cute indeed.
Greetox on the other hand has to be one of the best bots I've seen in a long time. The minor changes recently have paid off. :thumbup
Love love love Greetox, will it be made public?
Looks very compact, neat!
this is super clean, i love how the body gradually angles back into the drum in the rear rather than staying flat and squaring offThanks yall!
This is easily one of the best bots on here, great stuff Bild
Great sh** man, the design is great and the skinning is beautiful.Thanks! :3
Woh woh woh wait a minute.
There are events now? This makes every bot look ****ing amazing.
Ded0/10 no geodome chassis.
Posting here will help me surely or something something.
[ This attachment cannot be displayed inline in 'Print Page' view ]
I can't believe i build a bot. Extenderbot. Cool.
It drives and even has a weapon. The weapon spins like me, totally broken. I'm tired and should go sleep but i mafe that post. Lul.
Gn Lads
Very Spicy
0/10 no geodome chassis.
i have no idea what im looking at bot goddamn that panel skinning is godlikeYou're looking at anime! :gawe: