Author Topic: Redalert's CAD BattleBots and BattlBbot Tech  (Read 698 times)

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Redalert's CAD BattleBots and BattlBbot Tech
« on: November 15, 2018, 12:26:29 PM »
I never posted my CAD designs before, so I thought I'd post a few.

My CAD designer doesn't have a screenshot function, so I just have zip files.
The first is a drum spinner...
 

...and this one's a hammer.
 
both designs have moving parts such as spinning wheels and working weapons!
« Last Edit: January 10, 2019, 09:23:27 AM by Redalert »

Offline Philippa

  • The Queen of GTM
  • Giga Heavyweight
  • Posts: 6208
  • Rep: 1
  • ✊ Viva la Standard! ✊
  • Awards BOTM Winner
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #1 on: November 15, 2018, 01:01:53 PM »
Press the PrtSc button, that takes a screenshot, paste it into Paint or something, then save it and upload it.

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #2 on: November 15, 2018, 02:00:56 PM »
Print screen key didn't print screen... sorry.

Offline [cringey name goes here]

  • Chicken Nugget Enthusiast
  • Heavyweight
  • Posts: 441
  • Rep: -1
  • [relevant meme]
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #3 on: November 15, 2018, 03:13:28 PM »
Print screen key didn't print screen... sorry.
if you have ms paint you should just be able to press ctrl-v after pressing PrtSc
why, you may ask
to that i respond
yes
indeed

Offline Billy5545

  • Best Newcomer 2018
  • Heavyweight
  • Posts: 526
  • Rep: 3
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
  • Discord: Kendor#3191
Re: Redalert's CAD BattleBots
« Reply #4 on: November 15, 2018, 04:32:32 PM »
Alternatively, if you have snipping tool, you can just open the program where you make your CAD, load it, and then snip the screen to include the CAD, before saving that and showing us all the pic

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #5 on: November 17, 2018, 08:38:10 AM »
got it. thanks

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #6 on: November 28, 2018, 12:40:15 PM »
Okay, I tried it. My CAD Glitched. Here's another 3d bot...
 
Someday to be made in Ironforge, hopefully...

Offline Reier

  • *
  • Posts: 8402
  • Rep: 9
  • remember that robot game?
    • https://www.youtube.com/c
  • Awards old BOTM Winner
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #7 on: November 28, 2018, 01:30:34 PM »
please post pictures

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #8 on: November 29, 2018, 09:03:39 AM »
please post pictures

I tried that...

Offline Philippa

  • The Queen of GTM
  • Giga Heavyweight
  • Posts: 6208
  • Rep: 1
  • ✊ Viva la Standard! ✊
  • Awards BOTM Winner
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #9 on: November 29, 2018, 09:34:19 AM »
Taking sh**ty photos with your phone would be better than nothing.

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #10 on: November 29, 2018, 10:28:29 AM »
Taking sh**ty photos with your phone would be better than nothing.

Uh... ok...

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #11 on: December 19, 2018, 08:47:40 AM »
New bot. Oh, and I used the snipping tool to get the picture, by the way...
 

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots
« Reply #12 on: January 10, 2019, 07:08:08 AM »
Drum spinner. 3d printable, and has working wheels and drum, allowing you to spin them by hand.
 

here's the file...

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots and BattlBbot Tech
« Reply #13 on: January 10, 2019, 09:29:38 AM »
Ran out of kb. So, double post. Here's a Spinnerpro brushless motor, rated for 12-24v.
 
 

Spinnerpro motors have 3 terminals.
> red- positive
> black- negative
> yellow- ground.

Here's a custom 1-100 ratio gearbox. The shell's made of titanium, and the gears are made of hardened aluminum.
 
 

included artios- 1-8, 8-100
(first- 1-8, second- 1-12.5: 100/8=12.5)

Spinnerpro 18-36 v speed motor designed for spinners. has 2/3 the torque of the normal Spinnerpro motor, but 4/2 the speed. Marked in read to indicate that it's a speed motor.
 

dual-speed gearbox designed for HS the main shaft is longer to prevent warping.
 


Now, Micromotors are half the size of the original Spinnerpro 24v, and are the size of electric scooter motors.
 
 

Micromotors run on 6-18 v.
« Last Edit: January 10, 2019, 10:05:31 AM by Redalert »

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots and BattlBbot Tech
« Reply #14 on: January 10, 2019, 10:15:04 AM »
Spinnerpro Quad. Requires 96 volts because motors are wired in series. Found only in bots with mass amounts of battery power.


Spinnerpro right angle motor, designed for lightweights. Fast, but not powerful.


Spinnerpro E.E.M. (Energy Efficient Motor) also known as ECO. It gets its name from its ability to work on little power, and its ability to operate heavy bots. It has long magnets and a long armature, which make it turn slowly, and allow it to rotate mechanisms with great effort. (rule of third-class levers.)
 

E.E.M.s do not need a ground, and run on any voltage from 6 volts (very slow) to 24 volts (regular speed) E.E.M.s are marked in green.

E.E.M. MAX gearbox with Aluminum worm gear. Designed to operate slow parts on a bot- 1-1000 ratio
 


E.E.M. MAG gearbox. Nicknamed "the crusher," this steel gearbox can handle over 1000 pounds of force, and is ideal for clampers. It has a gear ratio of 1-10000 (1-1000, 1000-10000)
 

actual, fully-assembled gearbox on the right, gear configuration shown left.
« Last Edit: January 10, 2019, 03:08:53 PM by Redalert »

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots and BattlBbot Tech
« Reply #15 on: January 11, 2019, 08:53:20 AM »
Updated the basic Spinnerpro motor. It takes the efficiency of the E.E.M. and combines it with the balance of speed and power of the original. Doesn't overheat due to special grease in the motor that reduces friction. (friction generates heat). Runs on 12-24 v.
 


I also made more motors specifically for weapons.
 

(left) the Spinnerpro D. motor (drum) designed to rotate drum spinners at insane speeds. Spins at a rate anywhere from 6,000 to 10,000 RPM
(center) the Spinnerpro low rotation motor, specified for Wandering Spinners, due to the sheer strength of the motor. Mainly used with a low reduction gearbox. Spins at a rate anywhere from 500 to 2000 RPM.
(right) the standard speed motor. Keeps the same speed, but uses the same key concepts as the normal rfined Spinnerpro brushless motor. Spins anywhere from 2,000 to 8,000 RPM.

Spinnerpro low power motor (left) and micromotor (right) for LW and BW bots. Marked in neon yellow.
 

Low power motor runs on 6-18v while micromotor runs on 6-9v.
« Last Edit: January 11, 2019, 10:07:06 AM by Redalert »

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots and BattlBbot Tech
« Reply #16 on: January 11, 2019, 12:46:02 PM »
Spinnerpro basic titanium gearbox. Geared 1-100.
 



onto the wheels!

« Last Edit: January 11, 2019, 02:26:30 PM by Redalert »

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots and BattlBbot Tech
« Reply #17 on: January 14, 2019, 10:11:08 AM »
I can't make the toruses on the majority of these wheels any rounder. They just suggest tires.

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots and BattlBbot Tech
« Reply #18 on: January 14, 2019, 12:57:15 PM »
Steel extenders for mounting armor.

Offline Redalert

  • The inventor of Wandering Spinners, Snares, and InvinciRammers.
  • Super Heavyweight
  • Posts: 961
  • Rep: -29
  • Code: Redalert
    • View Profile
    • Awards
Re: Redalert's CAD BattleBots and BattlBbot Tech
« Reply #19 on: January 15, 2019, 10:48:41 AM »
Batteries, lol.

 


Magdum (another brand I made up) produces rechargeable batteries designed for robot combat.

Magdum's ECO and MicroBurst battlepacks are basically small cellular batteries wrapped in tough bendable metal.

The ECO battery is the efficient battery you need for small drive trains. Wired in parallel, this battery has 4.5v cells, each with 10amp. hours wired together. The voltage stays the same, but the longevity is multiplied by 5- 50 amp. hours at 4.5v.
ECOs are commonly used in large numbers due to their low voltage.

The MicroBurst is the exact opposite. It uses the same 4.5v cells, but the voltage is multiplied instead of the amp hours because it's wired in series. These batteries produce anywhere from 6- 28v- 10 amp. hours at 27.5v.

The Magdum 6v battery (the tall one) is basically cutting a Magdum 12v in half. It's a solid SLA battery, coated in light, non-conductive aluminum.

The Magdum 12v battery is the best choice for combat robots. It has the same longevity and voltage as 2 Magdum 6v batteries, but weighs 3/4 the weight of 2 Magdum 6v batteries. Uses SLA. (Sealed Lead Acid)

Here's all the components I've made so far...
 
« Last Edit: January 15, 2019, 04:29:56 PM by Redalert »